Swap to a 30 amp mini fuse, did that and worked great for a year! Just did it today and I had forgot which fuse it was and ran across my own video hopefully it works for y’all, will turn notifications on and if any problems pop up I’ll try and post about it, thank y’all!
I don’t want to go threw comments but I’m having that issue blinker work but no sound like the clicking radio on but no sound what fuse did you pull by chance I know we don’t have the same car I got a 2011 Chevy hhr and having that issue if you don’t mind what fuse did you pull and play with?
We have the same problem on a 2010 but there’s no fuse panel on the side like that. Is the panel in the middle by the passenger side feet the same thing?
I have a vauxhall Insignia 2013 but I have tried fuses and nothing changed. Any further tips? Manual wasn't really clear on which fuse so I tried a few relating to instrument clusters and the infotainment system
I've pulled 3 30a fuses well they are bigger than the fuse he pulled. I've got 3 boxes and I've got at least 9 20a fuses and i have no idea what fuse to actually pull out. I've looked at my manual and the inside of the fuse boxes but idk what dose I'm looking for, can someone, anyone answer what the fuse should say? I've already unhooked the positive cable and that didn't work, now i see one that said unhook the negative battery cables, but this would be easier if it was a fuse. I even put the car in reverse and hot my onstar but it didn't help bc the call ended because i can't hear them and they can't hear me. So if anyone can tell me what I'm looking for that would be great.
It’s the factory amplifier, it’s a common failure. Took me a lot of headache to figure out! Hope it’s your issue as well and helped , even though this comment is a year old better late than never lol
All my car sounds are very faint for example the turn signal or seatbelt or the door being open. The radio works but has a terrifying screeching noise in it and the radio on max volume sounds like 10
Im having this problem i put a new battery, unplug the battery to reset my truck i pull out the fuse put it back in same thing my radio is not working sometimes it goes on by himself then when I shutdown my truck and turned it back on radio won’t work again😪 any ideas
did you find the problem yet? i have the same issue. sometimes it takes 5 minutes to come on. it all started with the clock not keeping time and it will only keep it like every 100 starts. sometimes i lose the presets for the radio. it's driving me crazy. i have been researching for weeks
@@kenshimink8246 i thought it was the HMI under the dash so i spoke to a company called Infotainment. I described my problem and they also said it sounded like the HMI so i ordered one. I put it in and didn’t solve my issues. I then disconnected the negative terminal on the battery for about 5 minutes to reset the truck’s computer. It’s been a few weeks now and everything seems to be working. I disconnected the positive terminal before and it did nothing. Be sure to try the negative terminal.
@@kenshimink8246 well guess what happened today. All black screen with no sound. I’ll disconnect the negative terminal again later and see what happens. Ugghh
It’s in the engine compartment. 15amp blue fuse. Mine did this and I been reseating it for an year. Maybe switch the 15 for a 20 then later to a 30amp?? Idk.. but it’s annoying.
I appreciate you! I pulled the fuse, put it back in and sure enough everything comes back up. Weird. Mine was a 14 Sierra.
This immediately fixed my issue thank you!
Swap to a 30 amp mini fuse, did that and worked great for a year! Just did it today and I had forgot which fuse it was and ran across my own video hopefully it works for y’all, will turn notifications on and if any problems pop up I’ll try and post about it, thank y’all!
Amp
Thank you, now I just have to find where that box is located on my Buick Lacrosse 😂
Awesome at work man. Thank you very much.
You have a bad ground wire....it will do it again until you tighten up the ground wire on the chassie of the vehicle.
how bout on a 2014 camaro, but with the same issues?
Hey it worked for my 2014.
I really dislike newer cars
I don’t want to go threw comments but I’m having that issue blinker work but no sound like the clicking radio on but no sound what fuse did you pull by chance I know we don’t have the same car I got a 2011 Chevy hhr and having that issue if you don’t mind what fuse did you pull and play with?
I also have no turn signal sound, I've got a loud popping coming through my speakers, nothing works on the radio.
yes I have the popping in my car too , everytime I turn my car on , did you ever find out what it was or how you fixed it ?
Anybody know answers?
I had this issue. Only thing that worked was changing out thee amp
this is happening to me right now 😭 it goes in and out .. sometimes i’ll get sound back. i’ve read it could be a loose fuse but who knows
@@g0neg1rl85 did you ever figure it out I’m having the same issues
THAAAAAAAANK YOooooooUUUUUUuuuuuuu!!!!
Name of the fuse you removed please
Right smh
It’s the 20 one mini
i have chevy hhr I turn car on radio don’t turn on no blinker sound ground and positive tested fuses good new radio any ideas really helps thx
I have the same issues did you figure it out?
Wihich one do I swap ? I have the same issue on a 2009 Chevy tahoe
We have the same problem on a 2010 but there’s no fuse panel on the side like that. Is the panel in the middle by the passenger side feet the same thing?
Yes everyone’s vehicle will have one. I used to have a mini van that the fuses were in the trunk haha
What fuse was it same problem on 2009 buick Enclave. Happened after going through ccar wash.
What about instead of no sound im only hearing static for both the radio and blinker sound.
I have a vauxhall Insignia 2013 but I have tried fuses and nothing changed. Any further tips? Manual wasn't really clear on which fuse so I tried a few relating to instrument clusters and the infotainment system
I did this and it worked. The next day I lost sound again and the fuse trick would not work again.
U fix your truck
@@JoseFlores-gr7qt a couple days later sound came back.. still working. I expect it will fail again one of these days.
just change the battery
It’s the fuse itself, replace it before the battery. The fuse is inexpensive
How long does his last??
How do we get rid of that clicking noise tho? Mines loud
At the expensive of the radio you can have that.
My truck does not have a fuse on that side. What fuse is that for?
Mine either. Mines a 2013 chevy Tahoe
Thanks bro is it worked on my 2020 z71
Mine turns on, no sound.
I've pulled 3 30a fuses well they are bigger than the fuse he pulled. I've got 3 boxes and I've got at least 9 20a fuses and i have no idea what fuse to actually pull out. I've looked at my manual and the inside of the fuse boxes but idk what dose I'm looking for, can someone, anyone answer what the fuse should say? I've already unhooked the positive cable and that didn't work, now i see one that said unhook the negative battery cables, but this would be easier if it was a fuse. I even put the car in reverse and hot my onstar but it didn't help bc the call ended because i can't hear them and they can't hear me. So if anyone can tell me what I'm looking for that would be great.
My turns on the signal's work radio turns on but no sound?
Did u fix it I got same problem
@@JoseFlores-gr7qt no I'm using a bluetooth speaker for radio 😂
Lol ok
It’s the factory amplifier, it’s a common failure. Took me a lot of headache to figure out! Hope it’s your issue as well and helped , even though this comment is a year old better late than never lol
@@cherylynhinton1317 how do you fix it
CHANGE AMPLIFIER IN TRUNK
All my car sounds are very faint for example the turn signal or seatbelt or the door being open. The radio works but has a terrifying screeching noise in it and the radio on max volume sounds like 10
Did you ever fix it ?
I did this in my Chevy Malibu 2009 bit it didn't work?
Im having this problem i put a new battery, unplug the battery to reset my truck i pull out the fuse put it back in same thing my radio is not working sometimes it goes on by himself then when I shutdown my truck and turned it back on radio won’t work again😪 any ideas
did you find the problem yet? i have the same issue. sometimes it takes 5 minutes to come on. it all started with the clock not keeping time and it will only keep it like every 100 starts. sometimes i lose the presets for the radio. it's driving me crazy. i have been researching for weeks
@@mikegiradi same for me did you find a solution
@@kenshimink8246 i thought it was the HMI under the dash so i spoke to a company called Infotainment. I described my problem and they also said it sounded like the HMI so i ordered one. I put it in and didn’t solve my issues. I then disconnected the negative terminal on the battery for about 5 minutes to reset the truck’s computer. It’s been a few weeks now and everything seems to be working. I disconnected the positive terminal before and it did nothing. Be sure to try the negative terminal.
@@mikegiradi okay I’ll that thanks
@@kenshimink8246 well guess what happened today. All black screen with no sound. I’ll disconnect the negative terminal again later and see what happens. Ugghh
where would the fuse be for a 2011 silverado on the driver side
It’s in the engine compartment. 15amp blue fuse. Mine did this and I been reseating it for an year. Maybe switch the 15 for a 20 then later to a 30amp?? Idk.. but it’s annoying.
Not sponsored by chick filet
Azera 2015 same isuee😢
As far as I know that means your battery is going to die so we replace it soon and you will not have this problem as some other RUclipsrs said
I bought a brand new battery nothing changed!!
My battery is new as well and still has the same issue, unless my alternator is going bad
My Cadillac doing the same shit bro what u think it can be my screen / radio not working , neither the turning signals aren’t ticking
Say bad boy one more time!!!…
Question, how do you know which fuse it is? I have Arcadia 2008 ??
Look at your manual