NeoDen 4 Pick and Place Machine with Vision System
HTML-код
- Опубликовано: 29 сен 2016
- This is a video demonstration of the NeoDen 4 pick and place machine with built-in vision system. Additional details can be found at: rayshobby.net/?p=10932. I am not associated with NeoDen in any way, please do not contact me for purchasing or sales information. Thank you.
Наука
Thank you so much for taking time to make such a great review video.This is really helpful for those who want to have some sincere feedback from some end users. Thank you again!
Thank you so much for posting this. We are considering to buy one of these machines. This video is a great training tool, and it taking the fear out of the decision to move forward, as I will already have familiarity with it.
Does it have vacuum sensing to detect a mis-pick when vision is disabled ?
Yes, you can enable or disable vacuum sensing for each feeder individually
we have higher placement speed pick and place machine, email: smttechpnp@gmail.com
The reduced speed option looks very badly implemented - it still moves slowly when moving __to_ the pick position - WTF?
That's an interesting point, didn't pay attention to it until you pointed it out. Well, honestly to me accuracy is the primary concern and speed is not that crucial (I only do small-batch runs in house and large-batch is always outsourced to factories).
+Ray Wang could you instruct me how to get it to boot up? All mine does is boot to the logo then the screen goes dark
I am not neoden support. You should contact their tech support about it.
how does the robot know where the fiducial marks are? were the coordinates of the fiducial marks recorded in the system such that the robot will move to those coordinates and uses the camera to ever so lightly center on it? what is the board is skewed? will it still wortk?
It has camera and computer vision algorithms.
Great video! Would you mind sharing which Reflow Oven do you use? And if you had to grade it. 0-10, according to your needs? You seem to have experience with these machines and your insight is very well appreciated. Thanks!
Just recently bought the new reflow oven from Neoden (model IN6). It's not cheap but works quite well.
hmm... do I need to watch the whole video to figure out what price range this machine is? :D
I couldn't find the information on their site either :(
You can find pricing information on their Aliexpress website or even eBay. This video is about technical review, and pricing varies a lot depending on how many feeders you want and the shipping cost varies too. I am not associated with their company so you have to contact them to find out price quote.
Yes,we have price on aliexpress or ebay,but on such B2C site,price include aliexpress or ebay service charge.Little higher.
So,if anyone interest,pls send email to us:haimi@neodentech.com
or we can talk on skype:haimi2008
This software only comes at english language?
English and Chinese.
Very interesting video. I chuckled when you said "I changed the language and need a code to change it back" If you don't mind me asking. What does this system cost?
I am not sure if I should post the pricing publicly. If you have owned one of their previous models (I have a TM-240A), you can negotiate for discounts when purchasing the new machine. Send me an email (rayshobbyshop@gmail.com) and I will tell you the details.
Nice video thanks for going through it in detail. Would be nice if the U/I was in English.
cool
They should have called it FC "fluctuating current" instead of AC