NFStrike Evolver | Forget everything you knew about Nerf modding... | Full Analysis
HTML-код
- Опубликовано: 21 авг 2024
- Nerf Rapidstrike | Nerf Stryfe | Nerf Mods | Nerf Pro
Purchase Link:
The nerf mod you never knew you needed. On sale as of the date of this video:
www.nfstrike.c...
Use my Coupon Code for an extra 15% Off! NNNerf15
Help support our channel through the following!
1) Subscribe, it's free! :)
2) Check out our amazing blasters in collaboration with PaperSkeletons3D!
www.etsy.com/s...
3) Check out our amazing merch!
notnuffnerf.my...
4) Follow us on Social!
IG: / notnuffnerf
X: / notnuffnerf
#nerf #nerfgun #nerfpro #dartzone #dartzonemax #dartzonepro #nerfultra #nerfrival #toycollector #toycollecting
Track: Upbeat Travel Positive by Infraction [No Copyright Music] / Let Me Know
Music provided by Infraction No Copyright Music
Spotify: open.spotify.c...
Product Link: www.nfstrike.com/product/upgrade-maintenance-kit-for-nerf-cs-18-n-strike-elite-rapidstrike/
Use my Coupon Code for an extra 15% Off! NNNerf15
Great video! Enjoy your work. This is the second video I've seen on this mod now and I absolutely have to have it! Going to use it to upgrade one of my Rapidstrikes that need some TLC. Will be posting a review and testing video as soon as the build is complete and I hope to get the same awesome performance you got! Keep up the good work!
@Apocalypsejunkiesxtreme that’s awesome man keep us posted and good luck!
That turned out Clean! Great video! I like how you explain in detail the journey of building this Beaty.
People always make jokes that we don't have flying cars in the 21st century, but we have affordable home fabrication units, instantaneous electronic communications around the globe, 24 hour point-of-sale transaction devices in our pockets, and a free video platform that will teach you just about any skill in a matter of minutes. We have technology people never imagined before modern times and the knowhow to make use of it.
Well done, NNN. This is an incredibly ambitious build, and showcases your resilience and ability to adapt to challenges.
And it sounds like a BEAST.
I dunno if I would say instantaneous but you are right on everything else.
@@Vindictator1972 Email, cell phones, VOIP, text messages, streaming, it's all pretty much instant. The fact that I can see someone is streaming on RUclips, get on, comment, and the host read it five seconds later is nothing short of magic to people of my parents' generation. We're surrounded by so much miraculous technology that it has become commonplace among the younger generations.
There's a guy on RUclips, I believe called The Phone Guy, who shows how rotary phone circuits worked. I can't begin to explain how complex it all is. And yet, the technology is so obsolete it's almost considered ancient.
We live in an age of wonders.
Damn man ur so talented. Every blaster i try and open, ends up in the bin. Jealous of you and ur talents man
Same
My boy Notnuf…off the chains brother!!
So cool that you printed the right colors! Great to hear that you communicate with NF cuz that most likely means that their kits will get even better than they are 🤘🏻
If you don’t have their Stryfe kit, get it! Seriously, I think you may like blasting with the classic over the new X once you hook it up. Mine was labeled as the v8. 40mm daybreak w/krakens. I’m a rookie but this thing is violently awesome and It’s still on full lengths.
It would be awesome if you had the interest to look in to the regulator kit as well. I have it on the back burning while I work on other projects.
My initial views of that kit seemed to have issues. Some didn’t work? It didn’t stop me from buying it because the Stryfe kit is impressive.
Stay on it, N!
Try
Thanks for the video, the color matching on the HoloSite looks fantastic.
Not-Nuff....you've done it Again !!! Awesome Build my Man !!! (That Strato-hawk is sick, Bro !) 🤠👍
Another fantastic video man!
Very well done!
Just finished my own custom rapidstrike build with this kit. Its amazing! i'm hitting an average of 170fps with kraken flywheel motors, kepler wheels, and 39mm daybreak rapidstrike cage. The only thing I'm not satisfied with is the color of the kits 3d printed parts and the fact it's not injection molded. but if they are willing to send me the files too, i would print in abs or something stronger in colors I like. great video as always!
bro i hope pro rapidstrike will be something like that
Beyond cool. Reminds me of when BMW started allowing you to customize parameters. (iDrive?)
Bro Iv been talking about this thing for months I love it especially with a banshee cage
Nice. I was planning another select-fire stryfe build, but with the strife slipped inside a longshot body, but given the cost of this kit, I might just get this and dig out an old rapidstike. Mind you, the site says the kit is only rated for 50 amps, which is two mieshels at stall, allowing a little headroom for resistance, and I was planning on fangs and high crush to get 150 on short darts, so I'll have to have a think. (Normally with select fire kits I split the circuit so that the high current draw flywheels are not pu;;ing amps through the board). But then that misses out a lot of the functions of this kit.....hum, decisions, decisions.
Yeah I like the current bypass idea. I would have gone that route if I would have put crazier motors but ultimately went with the 132s for the extra torque without adding too many amps!
I just installed one of these in my old Rapidstrike! If I would have known they made an orange one I would have aimed to pick up a Stratohawk to match the colors! Did you have any problems focusing your Holosight? Mine seems to be projecting an image that's too large for the sight itself and I haven't seen anything in the menus that would allow me to adjust it. Maybe I'll have to take it apart and see if there's manual adjustment.
They don’t. He had to print it for himself by asking for the “blueprints“
I had to focus the little projection screen by pushing it further to the left, then finally the entire image appears on the glass refraction screen. Be very careful as the components are very delicate!
When is that full size nailer coming out?
Working on a fore-grip update and should be good for February hopefully sooner man!
Or alternatively if you have way more money and only use half darts you can consider a SBF
For anyone who installed the Rapidstrike kit, did you have trouble with extra darts being fired on semi or burst? I’m getting one extra dart and often two extras on semi and burst. Tried all the settings to correct. The only thing that has an effect was to drop the pusher voltage to minimum (5V). That got me mostly down to firing one dart on semi but still getting the occasional second dart sneaking out. A bit worse on burst. I’m running Valkyries on a 9.6V NIMH in it if curious.
I actually encounter this every once in a blue moon but it wasn’t a significant enough problem for me to document it. Plus I was able to over come it with some trigger control which is what you would use to stifle-fire a full auto. Good strategy on the pusher voltage though!
I want to put this kit on a UAC carabine (from the doom mod "project brutality") shell
Who did you reach out to for the stl files? Are they posted some where. The color is the only thing that has stopped me from purchasing it
I saw the comment section on the product page and it looks like they’ll just email you if you post on there!
Very cool thanks, also what orange filament is that? It looks like a very close match
@@johnpetray5960 Sunlu PETG!
So I followed suite and I’m building the same set up. I’m going half dart and a different cage. Nfstrike forwarded me the files for everything but the part that holds the lense is not the same on my files. Did you run into this? Also my files didn’t include the trigger and rev trigger. Did you get all of that in the files you were sent
@johnpetray5960 had to ask them for the trigger pack files, they eventually sent them. I wedged the lens frame in and tilted it until the angle was perfect. It’s so snug it’s not coming out. Hope this helped.