3:40 is where I show how I went at it with a flathead. This method ended up bending the boost pipe if you are not careful (which is what happened to me) . I had to eventually replace that boost pipe because it created a massive boost leak. So I would be very gentle if you go that route. If you can, use a dremel to cut the metal band that holds the coupler to the boost pipe. I hope that helps.
I don’t think the stock ones will work, but yea when you remove the stock intercooler do not damage the boost pipe like I did when I removed the one-time use clamp that held the boost pipe to the intercooler. I had to replace the boost pipe because of this. That was a monster. If you have a dremel you can cut the one-time clamp off, it’s like a thin metal band
Got them on sale a couple years ago, game changer for sure- they are called “quick jacks” www.amazon.com/QuickJack-5000TL-Bundle-000lb-Portable/dp/B09YWLN489/ref=mp_s_a_1_2?adgrpid=85660391966&gclid=EAIaIQobChMIjaHWpLmB_AIVrylMCh0Eigu5EAAYASAAEgK6cfD_BwE&hvadid=617073616933&hvdev=m&hvlocphy=9026906&hvnetw=g&hvqmt=e&hvrand=13434392008045774718&hvtargid=kwd-312617860926&hydadcr=19037_13454672&keywords=quick+jacks&qid=1671307417&sr=8-2
howd you get the coupler off cuz i did exactly what you did and mine doesnt just clip off it has some factory clip that you cant just pull off
3:40 is where I show how I went at it with a flathead. This method ended up bending the boost pipe if you are not careful (which is what happened to me) . I had to eventually replace that boost pipe because it created a massive boost leak. So I would be very gentle if you go that route. If you can, use a dremel to cut the metal band that holds the coupler to the boost pipe. I hope that helps.
so the hard part is where the VSRM silicone pipes and stuff come in play? should i just use the stock ones
I don’t think the stock ones will work, but yea when you remove the stock intercooler do not damage the boost pipe like I did when I removed the one-time use clamp that held the boost pipe to the intercooler.
I had to replace the boost pipe because of this. That was a monster. If you have a dremel you can cut the one-time clamp off, it’s like a thin metal band
@@MichaelCow i have a new charge pipe coming tomorrow actually
@@ItsReflx nice, I should probably get one soon too lol
Stock ones don’t fit, if you stretch the pipes and hit em with a heat gun to warm em up they pop on easy
Put a vrsf race exhaust 👍🔥
The fmic comes with the pipe?
Yessir
Where’d you get that air jack from? Link?
Got them on sale a couple years ago, game changer for sure- they are called “quick jacks”
www.amazon.com/QuickJack-5000TL-Bundle-000lb-Portable/dp/B09YWLN489/ref=mp_s_a_1_2?adgrpid=85660391966&gclid=EAIaIQobChMIjaHWpLmB_AIVrylMCh0Eigu5EAAYASAAEgK6cfD_BwE&hvadid=617073616933&hvdev=m&hvlocphy=9026906&hvnetw=g&hvqmt=e&hvrand=13434392008045774718&hvtargid=kwd-312617860926&hydadcr=19037_13454672&keywords=quick+jacks&qid=1671307417&sr=8-2
Wow that’s expensive! I found 60$ charge pipe with bov on eBay and it’s been working perfect,.. should I get cheap intercooler too ? Lol
Might as well 🤷♂️
Oh you wanna go fast ?
Only