Piston Cleaning in Engine

Поделиться
HTML-код
  • Опубликовано: 25 июл 2024
  • Piston cleaning on a Kawasaki FR691V engine strapped on a Gravely HD52 mower. Remember kids keep everything super clean when working inside an engine.
    Cylinder Head Cleaning Video: • Cylinder Head Cleaning...
    Mower Mike’s Tool Store: www.amazon.com/shop/mowermike
    Mower Mike
    Disclosure: The Amazon link above is an Amazon affiliate links. This means that, I do earn a very small commission (at no cost to you) if you click the link and finalize a purchase.
  • ХоббиХобби

Комментарии • 23

  • @JFL829
    @JFL829 Год назад +3

    That gravely is a beast, that should be like new now and run great.

    • @MowerMike
      @MowerMike  Год назад

      Yep is one sweet rig. Hope everything is going well out on the road!

  • @brucer1220
    @brucer1220 Год назад +3

    Marvel Mystery Oil in the gas prevents this type build up and gives extra power and smoothness. It is really Miracle and everyone that uses it just loves it.

    • @MowerMike
      @MowerMike  Год назад +1

      Nah sounds like snake oil to me ;)

    • @brucer1220
      @brucer1220 Год назад +1

      @@MowerMike it's very legit ... even used in my Harely and my Yamaha outboard. Smooths out everything, negates ethanol.

  • @glennsprague8535
    @glennsprague8535 Год назад +1

    Simple Green does a good job at taking the carbon off pistons .

    • @MowerMike
      @MowerMike  Год назад +1

      You will love my next video

  • @chadfield376
    @chadfield376 Год назад +1

    Good video as always; do you check for piston "rock" in the cylinder while those heads were off? How much piston play do you consider too much play when you are checking/cleaning the piston(s)? Thanks.

    • @MowerMike
      @MowerMike  Год назад

      No idea that is beyond my level of Engine know how, I would just slap new rings on them and see how it works as long as the pistons don’t look beat up or scuffed

  • @AP-514
    @AP-514 9 месяцев назад

    anyone know what the Compression PSI should be on these FR691V's and do they have Compression Release on Both sides ? getting 50 PSI #1 and120 PSI #2.

    • @MowerMike
      @MowerMike  9 месяцев назад

      It should be atleast 120psi. You have some issues if one is just 50psi. Atleast you know what side has the problem

  • @stans5270
    @stans5270 Год назад +1

    Please tell me that you took that piece of shop towel out before you put the head back on.

    • @MowerMike
      @MowerMike  Год назад

      Haha yes I am not that dumb

  • @cbluecoat2776
    @cbluecoat2776 Месяц назад

    Can I soak the piston in Warm soapy water or Vinegar and baking soda mix?

  • @swartzkrautheim
    @swartzkrautheim 10 месяцев назад

    Where are you that you have full ethanol gas? E 85 is all you can get most places??? Ethonol burns cleaner than gasoline but also takes 30% more fuel to make the same power that build up is bad gas or oil build up that’s made it past the rings.

    • @MowerMike
      @MowerMike  10 месяцев назад

      Is 10% ethanol here, is plenty to mess up small engine

    • @swartzkrautheim
      @swartzkrautheim 10 месяцев назад

      @@MowerMike that’s not full ethanol like you kept saying in the video though?

  • @gtuttle4
    @gtuttle4 3 месяца назад

    No sound!

    • @MowerMike
      @MowerMike  3 месяца назад +1

      It only recorded to one side. Try both ear buds. Sorry about that

    • @gtuttle4
      @gtuttle4 3 месяца назад

      No problem.