How to Wind a Bobbin on a Pfaff 1245-706 Sewing Machine - Automotive Upholstery
HTML-код
- Опубликовано: 26 окт 2019
- ✅Any donation to support the channel will be much appreciated!
Paypal : cechaflo@gmail.com
✅Get our courses at: www.cechaflo.com
---------------------------------------------------------------------------------
This video shows two formal and two informal ways to wind a bobbin for Pfaff 1245-706.
Most of industrial triple transport sewing machines have similar procedures.
As we can see in the video the Pfaff 1245-706 has its original bobbin winder attached to front side of sewing machine head. We can realize the thread passes through the holes of thread guide wich also has a small tension disc in its back. Very important to keep the thread tensioned.
The table bobbin winder with tension disc included is an extra attachment I added on.
The two informal methods I show at the end of video are also valid just in case we are looking for faster ways.
Believe or not, many years ago I knew an upholstery shop whose machines lacked of bobbin winders and the upholsterers had to resort to old big wheel and nail trick to load the bobbins with thread.
I hope this information is useful!
Cesar 
Авто/Мото
Well done !
thank you very much..
Thank you very much for these nice tips. Have a nice sunday
😎 the nail trick. ... Thank you for all of your great videos!!
It is a real old trick! As I mentioned in the video description long time ago I knew an upholstery shop whose ramshackle machines did not have bobbin winders, hence the upholsterers (I ma included lol) wound the bobbins that way. As we can see in the video is a very fast way to load bobbins with thread.
Thanks so much for watching the videos!
The last idea I was using I thought in my first days while learning sewing Thank you professor
I do not recommend it, just mentioned as an anecdote in a shop whose sewing machines did not have table bobbin winders which are very cheap.
Thanks for watching the video!
Best video ever! Super clear
Boa noite, gosto muito de todas as dicas. Parabéns!
Muito bom gostei um super like 🇧🇷
Muy bueno Maestro sus trabajos le mando un saludo de Montevideo Uruguay felicidades gracias por compartir su experiencia en tapicería mi papá hera tapicero yo concerbo su herramienta y hago trabajos para mis carros y de mis amigos.
I have the same bobbin winder like yours which runs off of the sewing machine drive belt. I mounted the bobbin winder onto a separate board. I took the pulley off of the bobbin winder and tighten the chuck of a small drill motor onto the shaft in place of the belt pulley to directly drive it. It's faster and saves wear on the sewing machine.
Thanks so much for sharing a new interesting idea on how to install a bobbin winder independently on the sewing machine board!
Thanks for watching this video!
bonne
année 2021
Same Wishes to You! The best successful New Year 2021!!!
👍
thank you for your quick response unfortunately I did not see what interests me. I am talking about the height of the presser foot to be able to sew thicker 15 MM ABOUT THE FOAM PLUS THE IMITATION LEATHER (SKAI) and your video shows the pressure on the imitation. Can you explain to me how to do it or show it to me.
I love your videos they are very visual.
The regulation is in the rear part. The highest position of 'wing nut' moves the 'small presser foot' to its maximum height to feed thick materials.
Min: one:17 of this video:ruclips.net/video/MEoD-Jf2Nk4/видео.html
This is a 145 Pfaff Min: two:16 ruclips.net/video/J0JYZroCdzo/видео.html
The wing nut should be moved upwards to uppest position to sew thick materials.
hello!!!
how to adjust the height of the presser foot on a pfaff 145
thank you for your reply!
Pfaff 145 mechanisms are similar to 1245 and 545 models. Hopefully, this information is useful:ruclips.net/video/MEoD-Jf2Nk4/видео.html
ruclips.net/video/U3HBXBDDKoo/видео.html
how to make chairs as in cadilac or film Matrix?
Hello, thank you so much for your videos. I plan to take some of your courses. But before I do I have a very basic question (off topic for this video, but wanted to post on your most recent video): Where should we go to get the leathers that you show in some of your projects? I'm in the USA and cannot seem to find consistent leathers for car upholstery from Tandy. Or, are your leathers really a vinyl simulated leather? Thanks for your help.
I am located in Mexico, anyways I have got some information on where to get upholstery leather (automotive):
www.danfieldinc.com/ www.worlduph.com/ relicate.com/
www.carrollleather.com/automotive-leather
The leather I use in the videos are real cow upholstery leather.
Thanks for watching the videos!
@@Cechaflo Thank you so much! Where to get the leather product has been a huge stumbling block for me. This helps a lot!
@@cotton77837 You are welcome to this channel anytime!
I have a video that would be of great help to recognize automotive leathers which have a transparent sealer on top to add resistant to daily traffic in a car interior: ruclips.net/video/wPw7SixQb7o/видео.html
Do these tests on an inconspicuous area/edge of the leather you are going to purchase.
You can put rubber on the wheel for the nail trick.
It could be if somebody is going to use this informal trick. I do not recommend it, just mentioned as an anecdote in a shop whose sewing machines did not have table bobbin winders which are very cheap.
Thanks for watching the video!
Maestro Cechaflo, estoy muy contento me hice de una PFAFF espero sea original, en la placa dice asi en el primer renglon, PFAFF Kl. 138 en el segundo renglon dece, Ers, Nr. 901-0138-005/003 en el tercer renglon dice, Oberteil-Nr 1171165 Cual es el numero de modelo? Maestro es posible encontrar refacciones originales? esta maquina cose recto y zig zag, no se si es semindustrial o industrial, pienso que se puede tapizar cosas sencillas no muy gruesas, cree usted que pueda empezar solo con esta? es de arrastre normal, Gracias
Nunca he tenido una de este modelo. Según este video dice que es industrial:ruclips.net/video/UlEgsDzwzO8/видео.html De todos modos estas máquinas son muy fuertes. Yo empezé haciendo tapicería con una máquina Singer casera de mi mamá y llegué a tapizar carros con esa máquina. Le tuve que hacer una adaptación para ponerle pie de presión de rueda/rodaja y un peine de arrastre mas grueso para que jalara mejor el material. Es la que se usa mucho en el ramo de la zapatería. Al comienzo es un poco dificultuoso, pero luego uno se acostumbra. Tengo unos videos de esa adaptación en una Singer semi industrial: ruclips.net/video/ZRaoW9kL_oQ/видео.html
ruclips.net/video/V_IYfp7zBfI/видео.html
Si llega a ponerle la rodaja, esta va regulada pegada a la aguja. Si la ocuparía para zigzag entonces tendría que ajustar con su tornillo de ajuste un poco mas separado.
www.amazon.com/Kunpeng-Singer-Sewing-Machine-Roller/dp/B0777KSMFS
@@Cechaflo Muchas Gracias
اللايك🌷🌺🌸🌹🥀💮🌻🌼
Thanks for kind remarks!
🇹🇷🙋♂️👏👏👍
Thanks so much for kind remarks!