How to thread an industrial sewing machine and how to wind a bobbin using the attached bobbin winder
HTML-код
- Опубликовано: 8 сен 2024
- Industrial sewing machines are all a little different, but the basic principals of how to thread the machine and how to use the attached bobbin winder are similar. This step by step video will show you how to thread the machine, and how to wind and install the bobbin. The process is shown here on a Mitsubishi LS2-2210, which is an older model industrial machine, but is similar to other industrial straight stitch machines.
This video is so helpful as I don't have a user manual for my machine
Thank you for making the video.
Thankyou your video is the only best one after watching loads of other video your video explained everything in one God bless you well done and Thankyou again for this video. x
The video was helpful thanks a lot
Thank you...so helpful video ❤
Thank you!
Thank you , you really helped les a lot :)
Thank you so much
❤❤❤
Hi just want to insert bobbin into bobbin case, I am using vector VT20U43
Please show me how to insert bobbin into the bobbin case, and insert the bobbin to start sewing, when I start sewing the cotton breaks
Make sure it is unwinding in the opposite direction as the thread guide in the bobbin case. Check the tension. There is a little screw on the bobbin case that adjusts the tension. Not loose, and not tight.. just a gentle tension
What is the needle size or number for the Toyota industrial model DH 7538 ?
Un favor como se ajusta para que suba más el prensatelas de esa maquina gracias
Can you send your question in English?
@@ASquarePillowIsntSquare Como se puede subir más el prensatelss tela de esa máquina me podía apoyar gracias
A favor as it is adjusted to raise more the presser of that machine could support me thanks @@ASquarePillowIsntSquare
hello very nice lady I think as previously requested please kindly film how to operate the industrial sewing machine foot pedal how it's used to sew please ok?please kindly reply back ok?thank you very much
Ok Frank, I’ll show you how it’s used soon :)
i have a slightly different brother industrial
but could you tell me why my string doesnt seem to slide when i have it on the the second last tension spring? i got all the way around and hook correctly
i also keep breaking strings and needles from tightness and my bobbin wheel wont stay in the bobbin casing no mattter how i thread it
thanks
Wow those are some serious problems! I'm afraid I can't diagnose or solve machine problems from afar, but it really sounds like you need to find a local repair shop to take a look. There are some good Facebook pages that are great for problems like this. You can post photos and get help :)
👌