TURBO DIESEL Swapped 240Z is an ABSOLUTE MISSILE | Road Test!!
HTML-код
- Опубликовано: 22 июн 2021
- The Turbo Diesel 240z goes on a road test. It's so fast!!!
Support our builds by checking out our awesome driving shades!
Click this link: bit.ly/3zSPn8s
USE CODE: "teamboosted" FOR 20% OFF
Facebook.com/boostedshades
boostedshades - Авто/Мото
Please guys, put the steering wheel on straight, my ocd is killing me 🤣
None of the steering wheels on my vehicles are straight😂 the handle bars on my bikes aren’t even straight
@@austinmonk8809 🤣🤣🤣🤣🤣does it help you go straight 🤷🏻♂️
@@austinmonk8809 gay bars & wheels
@@machrider2333 yes daddy😩
Came to say the same thing 👍😂
that filter center cap is known to come unglued under boost,
As soon as I saw him pull it into frame I audibly said "oh no"
Yep, you want a solid piece. No nuts, screws or anything to accidentally bust free and hit the turbo fins.
@@1MBStudios same...
I always cringe when I see these filters on a turbo.
this series has made me want to build a turbo om606 and put it in a second gen El Camino. I would call it "Der Weg" which is german for el camino
this is the way
@@uliwehner this is the way
Not the om616?
this engine is not the only available option, you can do pretty much the same with newer BMW series engines M57 lots of modifications, easy to push them towards 400Hp region. A lot of parts available since the engine is newer. One of the most popular mods is to take the injectors and bigger turbo from 210Kw twin turbo engine, this will give you easy 400Hp alone. It might be even easier to work on then this om606. m57 is also good for around 500-600hp without changing inner parts.
@@JoshRiolu 616 is a gutless NA 4cyl with like 60hp.completely useless. A 617 is a turbo 5 cyl which is capable of a little power but high 250ish or approaching 300hp with head work and a big pump is about all it will do and it will be hot and cranky. It's all about airflow.
man, imagine putting leaf springs in the back and pulling a giant trailer through the mountains in a 240z
All the my truck is the hardest guys would dropping there jaw
Brado Potato Are You thinking Rocky Mountain Race Week? This build would do so well!!
It wouldn't be like you think. It's not a cummins. Not even a truck motor. It would do ok with a light load like on a race week, but it wouldn't tow heavy for shit. Lol
With a triple pass radiator big unit, NV4500 trans and a huge oil cooler I think the bags would handle the weight. Structurally it would be a challenge. The mass would break all the spot welds in the body would be my guess.
wait for the DYNO, the torque numbers will be shocking :))
I can't wait for this channel to blow up! these builds are dope
Furry?
I do like the long tailpipe. Keeps the stank out. These are S30 rules.
If this was parked next to rob dahms 3 rotor it would look like it was related 😆 I like the look of the longer tailpipe too it looks cleaner than a stubby one to me 🤷🏻♂️
450
😂😂😂
Maybe it can outrun the EPA?
Still can't get over how your wide angle lens makes the seats look like barcaloungers.
I spotted the Brit.
That black smoke, wait til it's tuned right, it'll put down more power.
Correct me if i'm wrong but isn't it a mechanical pump? I mean you can not tune those, like you can with modern electronic pumps..
@@skov9700 yes correct hence why it needs more boost
You can tune them at some extent, increasing/decreasing fuel amount. When they changed the boost, they should have changed the fuel amounts as well. The black smoke is because the air/fuel ratio is not correct. It might be because the engine does not get enough air, thats why further tuning it might require to supercharge it as well :)
@super hessu It isn't as simple as that. If it was strictly a drag vehicle what you said would be true, but a street vehicle has many more variables. Even common rails that are tuned to "perfection" will still smoke heavily on the street under numerous circumstances. With mechanical injection its even harder to make it have minimal smoke on the street, even under full boost.
@super hessu it is a sort of “rule of thumb” but just because it is smoking on boost doesn’t mean there’s too much fuel. Temperature, elevation, and others can contribute to smoke. He is also stomping on the throttle like an N/A vehicle, if he brake boosted it would more than likely smoke less on his highway pulls
Man I can’t get enough of this setup. Great job fellas!!!
The 240 has came a long way, great work on the car! reminds me of when me and my dad used to build up his 1999 BMW 540i. Kickass car and love the content!
Diesels are becoming more popular and I'm all for it. Nothing like quiet, high power and high torque. I had no idea how crazy those Duramax diesels are, too. Super cool to see how tame they seem but how rowdy they get.
Its a mercedes engine not duramax. Om606
@@r.fumador1146 well, to be fair, a lot Duramax swaps are becoming more common in older cars and that may be what he was referring to.
I love this car! The fact that it sounds like an old dodge at idle makes it perfect.
You need about 1 square inch of filter area for every 10hp. Just to give you an idea how big a filter you need. 👍
Does that include depth and paper thickness or porosity?
One of the best builds out there, sounds and looks friggin amazing, awsome channel 👌👌👌
This is absolutely one of the coolest builds I've ever seen. I don't even usually like bags, but this is a good application. Can't wait to see more guys! Please take this to the strip after dyno.
You guys are always doing cool stuff at the edge of practicability; keep at it!
Dam dude, that’s the best build I’ve seen in a while.👍🏻
Super clean and cool build video popped up on my recommendation list and I wasn't disappointed you guy delivered can't wait to see more
Ps sick shades 😎
This is first time I've seen any of ur content but its great subscribed and hit that bell looking forward to what's next
Love the build. Can't wait for more content :)
This is hands down my favorite build in all of RUclips. I love a good Z, and damn you guys did this one right. Horsepower guess is 517 wheel.
i run 41 psi atm and mate im telling you when u gonna get there this car will flyyyyyyy, keep up the good work
That start up puff rolling on the Prius after your lunch was awesome lol great job guys!! Cheers
Love it! I really appreciate the Benz diesel attention!
I’ve had some boosted shade for awhile now but one pair broke when I tried to clean roof cement off them
Awesome Datsun, greetings from Costa Rica 😎
That car is awesome!! I will catch up on the videos and continue watching.
Ordered some shades a couple days ago, really like this build guys!!
Founds this on my suggested, this thing is SICK! I need to go looking around and watching the rest of the videos for this. I am just guessing on a whim, this thing will make 467 rwhp. Good luck! Look forward to seeing the dyno vids!
fantastic build, that’s an instant sub 👏
Kinda curious how awesome thing would sound coming to a stop if it had an engine/exhaust/jake brake lol
Awesome comment
One of the best things recommendations has popped up on my feed
The way this thing sits on the ground reminds me of Rob dahms 4 rotor
Love the sound of this thing!
Awesome build! Love the Z car and the motor
That is a bad ass ride!! Good job guys!!
New subscriber here and I love this, so much!
Greets from the UK!
480hp
Best build on RUclips!!!
That smoke coming out the back is making me hungry for some barbecue. It’s fire as always!!! Boosted shades everyone, we need more builds from this crew!!!!
you guys might convince me to turbo diesel swap my Mr2
i miss my MR2, if i still had it i would do the same, Mercedes Benz Inline 4 Diesel. If you do end up doing a diesel swap please document!
I'd probably choose a 2.4L 5cyl JTDM diesel if it would fit in an SW20, that would be a pretty unique swap
because a 3ltr rwd config diesel would be a suitable swap for a mr2 🙄
too heavy... It might ruin car stability completely
@super hessu No go the 611 route like i am, its the best option for the MR2
Sounds so good! All Turbo and I6 sounds vs diesel sounds when actually hitting the Gas pedal
I think that you can hear the mechanics working in any (older) diesel engine and i6 engines are known for there quite engine run than is just a great combination for engine sounds
Just what I needed in my life. Team Boosted and a boosted Datsun
Looking forward to seeing what it does with more boost!
I ordered some shades from boostedshades I cannot wait for them to get here. Love the content as always and can’t wait to have some badass shades from some badass dudes
Just completely bada$$!! Nice work!
What a great job you did to make this such a masterpiece, it is difficult to find or modify such a thing and attach a diesel engine to it, great work guys 😱🔥🔥
damn guys I love this build, you need TDIB to try it!
love it, keep up the good work!
That's a beautiful machine!!! I need one of those in my life!!
I had a truck driving coworker who I convinced to order some shades from you. I have glasses so no shades for me but had to help a brother out!
444HP!
That turbo noise... I need that in my life!
Bro, this is my favorite yt build so far, I think you guys really need to show at hoonigan, or Larry chan
I love It! For some reason, im starting to like the idea of a turbo diesel miata
I’m from ramona it’s nice to see you guys filming out here 👍
That’s super sweet vid. Can’t wait til next vid
Damn haha if only car channels hadn't started showing how awesome this car is, maybe I could buy one haha, super sick 240!
This is one of the sickest 240 builds ever
I love the way this car looks!! It’s so awesome. And my guess for the wheel hp is 450bhp. Add the extra psi it’ll go up to 580 bhp. I have Datsun envy
Great video. Inspired to do a build myself. Love the diesel. 490hsp 711Trq
In Thailand we run DRAG DIESEL cars at 120PSI BOOST with a ISUZU 3.0L 4Cylinder 4JJ1-TCX Engine. Running low 7 sec quarter mile. DIESEL POWER for LIFE.
Just sick.... Love your work.
Whoooo man this things just Damn gorgeous!! Such a unique build too!! Wonder how much yall have into it now.
this car is mind blowing. beautiful dream build
This turned out really nice. Would be cool to see it as a Devil Z replica with the torque monster diesel surprise.
475Hp ! I've made may prediction. Man that is a sweet and exciting ride with crazy fast pick up.
me quito el sombrero, que buen trabajo, increible, habeis ganado un sub
New here, seen a few videos on this build and you definitely got a solid follower 🤘 I'm gonna guess she'll hit 747HP!!
Id love one of these white chrome and gold rims with a full black interior. This thing is so cool
Seriously buys some boosted shades I have a pair that has lasted me like 4 or 5 years and I love them need to buy more soon
Love the use of an OM606!
That is a crazzzzy setup man
You should try printing the center console plate in Nylon wit Carbon Fibers in it, makes a really cool looking texture and even though it's little fiber strands it has a little bit of that glow that carbon fiber has when the light hits it.
Digging this build, and didn’t realize you guys were in San Diego
Lovin this build 👏👏👏👏
Boost to the moon! 🌙
The turbo spooling sound is amazing
Love the build guys, I'm going 527 at the wheels. Good luck....👍
Wooo boost and turbo noises makes me happy.
I want to see y’all perfect the one rotor roadster
Comment on your own comments so they’re promoted better. They should have more of everything
Hell yeah good job
FIRST
Love this build 😍
Love this build
It’s the sound for me💪🏻. Nothing beats that old fashioned i6 grunty diesel sound and shove. This series is taunting me to build another car😬
Good video,very informative 😎😎😎👍👍👍
If I wanted to drive a Subaru through mountain twisties and then take it on an ohv trail in the same trip, would this suspension set up be a viable option?
Dang that thing rips
Good shit guys!
Next to the single rotor build this is my favorite build you have done. HP estimate on the Z I think it will hit 538 HP.
You guys have created a beast!
417whp 589ftlbs current.
This earned a subscription
I'm more curious as to what the wheel torque figure is going to look like🤔 love the build, and hope to see much more of it!
I guess around ~800Nm
@@S3l3ct1ve hopefully more, also curious as to what kind of mileage it will be getting after it's tuned
@@stevendavis1267 Its gonna be a very pleasing numbers, no more than ~10l/100km average excluding track. On highway it will be 7-8l/100km doing ~80mph thats like ~30 USA mpg`s..
The power/economy ratio of diesel cars is just nuts... I wish I had a petrol car, but I just cant find any replacement for my 330D if I would compare power/economy... From power standpoint I would be looking at 540i or similar cars, and that s like double the price of fuel not to mention that the petrol is more expensive..
@@S3l3ct1ve i have a 2005 vw tdi and love that thing to death. 40+ on the highway with the AC running at 75mph
I’m gonna say 485hp but crazy torque. Love this build.
The exhaust back pressure will push open the wastegate even with no help from intake manifold pressure on the diaphragm. Stiff spring will keep the gate closed longer.
That thing rips!
You guys are definitely building my dream car.
A smart move would be to add a intake closing throttle valve so when you get diesel runaway from boosting so much you can shut it down and save it, this is a must if you care about your motor. Message me if you need more info.
Don’t some diesels have a switch that pulls open the exhaust valve to kill compression?
@@fungdark8270 no jacobs engine brake on that engine haha
Please
I'm thinking 475 at the wheel. Love this car! I need a 606 in my life!!!
A 606 will make 680hp to the wheels at 30psi with the right fueling lol
Sick ride all the way around...and I'm guessing 537hp after spring and 40ish psi of boost...
What size pump elements and fuel cc’s are you guys pushing? Also what rear gear is in the car? Killer setup I cant wait to get my project going thanks for the inspiration!!!
Sounds so insane
Everything about this car kicks ass
Sh=t. I'm less than a minute in and I love it. Like how you're all in it 'til death. All in or nothing...
All the best my dudes!😁🍻🤘