Thanks for the video! I was able to install the hitch on my own. I would not have been able to without this video. I installed my hitch on a 2018 Ford Escape. I would recommend having a friend to help, or you have to use adjustable jack stands to allow the use of hands to begin the bolt threading process.
This video is much better than the printed instructions that come with the hitch. However, more time and detail need to be added when showing the placement of the hitch on the rear of the vehicle. It was extremely difficult and the video barely shows the placement at all.
A couple of installation tips based on my experience: - If you don't have a strong grinder or grinding attachment, the minimum width of material you need to remove to make the bolts pass through the slot is maybe 1-2 mm, or roughly the width of the ridge - !!!SUPER IMPORTANT!!! NEVER let any of the fish-wired bolts go rearward into the black crush can (rear-most structure bolted to the frame). The bolt and rectangular plate will get stuck because of the important difference in sizes between the opening at the end of the frame and the opening at the start of the crush can. If this happens, you either: a) need to spend an eternity repeatedly rapidly pulling the fish wire in the hopes the bolt and plate will line up correctly and pass through the frame opening (there's also a tiny access hole on the bottom face of the crush can where you can put a screwdriver to prop up the plate and bolt), or b) need to unbolt both crush cans, and pull the entire bumper beam rearward to gain access to the bolt and plate again and push them back through the frame tip opening. This simple mistake turned an otherwise simple job into a multi-hour ordeal.
Thank you for Taking the time to show what is entailed in installing this Hitch. The instructions help but this video is more helpful. ***This video, nor your instructions, though explain how to actually install/place the hitch onto the vehicle. I found it very vague and extremely difficult to do based off of your instructions and this video. This is not a 1 person job and I found the etrailer video to better explain how to get the hitch over the muffler.*** Looks great though!
The hitch over the muffler on the driver side is a pain in the ***, you should ask a friend to help although possible alone, this part only would take 30min Except for this part, everything is simple and self-explanatory
Thanks for the video! I was able to install the hitch on my own. I would not have been able to without this video. I installed my hitch on a 2018 Ford Escape. I would recommend having a friend to help, or you have to use adjustable jack stands to allow the use of hands to begin the bolt threading process.
This video is much better than the printed instructions that come with the hitch. However, more time and detail need to be added when showing the placement of the hitch on the rear of the vehicle. It was extremely difficult and the video barely shows the placement at all.
Please call us at 800.798.0813 to speak with one of our technical service members for any installation questions or help.
A couple of installation tips based on my experience:
- If you don't have a strong grinder or grinding attachment, the minimum width of material you need to remove to make the bolts pass through the slot is maybe 1-2 mm, or roughly the width of the ridge
- !!!SUPER IMPORTANT!!! NEVER let any of the fish-wired bolts go rearward into the black crush can (rear-most structure bolted to the frame). The bolt and rectangular plate will get stuck because of the important difference in sizes between the opening at the end of the frame and the opening at the start of the crush can. If this happens, you either:
a) need to spend an eternity repeatedly rapidly pulling the fish wire in the hopes the bolt and plate will line up correctly and pass through the frame opening (there's also a tiny access hole on the bottom face of the crush can where you can put a screwdriver to prop up the plate and bolt), or
b) need to unbolt both crush cans, and pull the entire bumper beam rearward to gain access to the bolt and plate again and push them back through the frame tip opening.
This simple mistake turned an otherwise simple job into a multi-hour ordeal.
Thank you for Taking the time to show what is entailed in installing this Hitch. The instructions help but this video is more helpful.
***This video, nor your instructions, though explain how to actually install/place the hitch onto the vehicle. I found it very vague and extremely difficult to do based off of your instructions and this video. This is not a 1 person job and I found the etrailer video to better explain how to get the hitch over the muffler.***
Looks great though!
now that is slicker than snot on a glass door knob!
The hitch over the muffler on the driver side is a pain in the ***, you should ask a friend to help although possible alone, this part only would take 30min
Except for this part, everything is simple and self-explanatory
it only took me 4 hours to do. that was hard af
Well we are so proud of you! It'll be completely worth it. Safe towing!
I have a 2013 Escape and I’m thinking about purchasing this hitch. Does it include the “fish wires” along with all hardware needed to install? Thanks
The fish wires are included in the hardware pack.