People have know idea how labour intensive this is and accurate it has to be. Years ago it was even more so. Great video on how things start from the ground up.
I've used your service a multitude of times for some (quite large through-hole DIP) boards. Always decent process stage updates, packing, and boards tested properly. You compete with OSH well(and cut the boards far better), and my next step is to try your assembly service (once I'm not such a noob at BOMs). Your proactive UK customer support is also appreciated(this may have been an amusing conversation for them! :)). You're my preferred board house. 73's, Ian H
I like your material coding but why you coding material and how your tracking this coding also if you do Multi layer press the coding cover what you will do for tracking if the coding not appear.
Coding is done on the inner layers and after pressing again on the stack. All machines can read the pinned code. Full traceability on production panel level is therefore in place. Thanks.
@@eurocircuits really Great your quality in work the machine can read by it self or by code reader also the traciblity which ERP system SAP really you are good company
@@estareehapp7874 Self made ERP and self made traceability system. On each machine there is a reader installed that reads the needle code on the panel. Either fixed installed reader or a hand held reader.
@@eurocircuits appreciated that your are tracking every single panel this increase the quality also i liked also that you again coding every panel after press
Eurocircuits has no ambition of creating magic. Making boards is already complex enough. Our ambition is to make good boards and to inform designers on how it is done. Everything is shown in the correct order and how it is done in real life. All customers, electronic designers and electronics students are always welcome to visit our factories in Hungary and Germany. We also have our own online TV channel with more detailed information on PCB technology: www.eurocircuits.tv And if we should be able to impress anyone with this, than that would be a nice reward for our work, but not our fist goal.
@@babydove More layers can have different reasons but are always linked to the design of the electronics and thus the resulting layout made by the designer. Complex circuits require more tracks and thus at some point more layers and yes also electro magnetic behaviour will require the use of planes in the PCB which results into more layers. But it's all an electronics designers decision.
@@eurocircuits will it's work well in class A amplifier, it generate high heat? Your PCB circuit board is looks so cool and advance but I like to know for heat dicipation what material you prefer to use in particular cases?
@@babydove For heat dissipation there are various option: Insulated Metal Substrate (ALU based single sided circuit - www.eurocircuits.com/ims-pool-orderpooling-for-insulated-metal-substrate-boards/ ) or FR-4 boards with a heat sink paste solution ( www.eurocircuits.com/pcb-design-guidelines/#heatsinkpaste ). Best to take contact with our customer service department in Mechelen to discuss your needs in detail. euro@eurocircuits.com or +32 15 28 16 30 or via live chat on www.eurocircuits.com
Designing boards is indeed a very important and complicated task. The quality of any board or end product carrying this board depends on the quality of the design. But making a good design is not possible without knowledge of how boards are made. Any digital design must be physically made at some point in time and therefore knowing the limits of what can be done is needed. It is our goal to help designers to acquire as much of this knowledge as possible by informing them of manufacturing techniques and constrains. www.eurocircuits.tv
@@ufukbarlin6963 This film is the updated version of www.eurocircuits.com/making-a-pcb-pcb-manufacture-step-by-step/ Each of these steps will be explained in detail on Eurocircuits.tv as the year progresses. Examples: www.eurocircuits.tv/category/electronic-manufacturing-technology/ and www.eurocircuits.com/pcb-design-flow-optimized-and-pcb-cam-in-the-eccloud/ etc... Company websites offer so much more info than one film on RUclips can. Hope you find what you need.
If you are that much hi-tech Hi-QA fair prices then why do I still see many of RUclipsrs makers are interesting to promote Chinese PCB factories all time to do their prototypes ???
Eurocircuits .... If the marketing business needs to do that payment to gain customers and be market dominant then why not paying them ??.... This is business..... By the way , most of those RUclips makers are not getting paid but they have credits or discounts for their promotions and no down payment.... To be more honest with you, your way of business flow and cost make such small businesses fly away to China which welcome every cent no matter what or how to gain it and this lead by time to make that Chinese name a big name and market leader.... I wish humbly that you could listen and change a bit to deal with such competition level and not always thinking of big fat customers and orders ,,,, but Europeans keep deaf for advises ...
@@ahmedalshalchi For 30 years already, Eurocircuits has searched for ways to drive the price down for PCBs and now Assembly of PBCs, prototypes and smalle series and thus have shaped the market in Europe. With 12.000 yearly active customers in Europe we can state that most of them are not "FAT" as you call some of them. We are indeed humble and welcome every customer even with one single order, as we have always done. And we invest tons of Euros in free tools to help the electronics designer to make his protos "Right First Time" which saves time and money. We doubt fair costs are the reason for the fears Asian competition. The absence of a level playing field is or do you really believe that 2$ for 10 PCBs is a realistic price? These days even 0$ can be achieved, you just pay the transport. In Europe, we do not fight with the same weapons and we are not subsidised neither. We have published about this on various occasions but we have the impression that only few people want to see the real reasons for the differences. Here are some articles: www.eurocircuits.com/blog/reaction-on-some-extreme-chinese-prices/ www.eurocircuits.com/blog/european-electronics-industrys-addiction-to-chinese-supply-is-dangerous/
Eurocircuits .... OK .... 2 questions please ; 1- Do you accept payments by Western Union and Money Gram methods ? 2- Does your sales and marketing dept. have the willing to discuss and chit-chat with customers all day time even without gaining many orders ?
@@ahmedalshalchi 1. Sorry these methods are not known to us here in Europe. We accept Visa and Mastercard. We do apologise, but our explicit focus is on the European market which does not mean we won't help others as well with our PCB service. www.eurocircuits.com/payment-methods/ 2. We have a live chat on our website, eurocircuits.com and are always happy to help via any communication method (although this one via RUclips is not our usual method and is not monitored by our customer service neither). Apart from that, eurocircuits.com is probably one of the best lexicons on PCB technology and free to use as are our online tools which are available as soon as you have a customer account which of course is also free to make one.
Wow... this is what do I call quality at a 100%. A pretty good example of all the "5s" applied as well.
More on PCB and PCBA manufacturing techniques can be found here: www.eurocircuits.tv
People have know idea how labour intensive this is and accurate it has to be. Years ago it was even more so. Great video on how things start from the ground up.
More on PCB and PCBA manufacturing techniques can be found here: www.eurocircuits.tv
I've used your service a multitude of times for some (quite large through-hole DIP) boards. Always decent process stage updates, packing, and boards tested properly. You compete with OSH well(and cut the boards far better), and my next step is to try your assembly service (once I'm not such a noob at BOMs). Your proactive UK customer support is also appreciated(this may have been an amusing conversation for them! :)). You're my preferred board house. 73's, Ian H
Wow, thanks. Very much appreciated comment which we will share with our UK team.
Would love to see an update with some voice over of the manufacturing process.
On our list of too many things to do 🙂Thanks for viewing.
Very good quality pcb
Perfect!👍
Wow,Good job
Very Impressive!
Fascinating.
Gus Smith मिल्क एनालाइजर पीसीबी बोर्ड प्राइस
More on PCB and PCBA manufacturing techniques can be found here: www.eurocircuits.tv
buen video!!
wonderful job...
More on PCB and PCBA manufacturing techniques can be found here: www.eurocircuits.tv
Very cool thanks
More on PCB and PCBA manufacturing techniques can be found here: www.eurocircuits.tv
love to work there
More on PCB and PCBA manufacturing techniques can be found here: www.eurocircuits.tv
Excellent
Thank you! Cheers!
Awesome
As of now what is the maximum layer you can produce?
16-layers
wow super.
More on PCB and PCBA manufacturing techniques can be found here: www.eurocircuits.tv
good
More on PCB and PCBA manufacturing techniques can be found here: www.eurocircuits.tv
👍
would love to work there!
More on PCB and PCBA manufacturing techniques can be found here: www.eurocircuits.tv
Eurocir on pcb's?
We are Eurocircuits, European specialist in the manufacturing and assembly of PCB prototypes and Small Series. www.eurocircuits.com
Price of factory ??
I like your material coding but why you coding material and how your tracking this coding also if you do Multi layer press the coding cover what you will do for tracking if the coding not appear.
Coding is done on the inner layers and after pressing again on the stack. All machines can read the pinned code. Full traceability on production panel level is therefore in place. Thanks.
@@eurocircuits really Great your quality in work the machine can read by it self or by code reader also the traciblity which ERP system SAP really you are good company
@@estareehapp7874 Self made ERP and self made traceability system. On each machine there is a reader installed that reads the needle code on the panel. Either fixed installed reader or a hand held reader.
@@eurocircuits appreciated that your are tracking every single panel this increase the quality also i liked also that you again coding every panel after press
so, not a DIY at home process?
More on PCB and PCBA manufacturing techniques can be found here: www.eurocircuits.tv
DIY? How can you DIY a 4 layer PCB?
Ho to yous temperature of prepackaged
Processes have not shown in order. Thus it seems more complicated but in real does not. They try to make magic in order to impressive us.
Eurocircuits has no ambition of creating magic. Making boards is already complex enough. Our ambition is to make good boards and to inform designers on how it is done. Everything is shown in the correct order and how it is done in real life. All customers, electronic designers and electronics students are always welcome to visit our factories in Hungary and Germany. We also have our own online TV channel with more detailed information on PCB technology: www.eurocircuits.tv And if we should be able to impress anyone with this, than that would be a nice reward for our work, but not our fist goal.
Is it that PCB anti EMI ?
Please clarify. Never heard of EMI in our market. Thought EMI was a music record label, no?
@@eurocircuits It's mean to reduce electro megnentic interference in PCB circuit board.
@@babydove More layers can have different reasons but are always linked to the design of the electronics and thus the resulting layout made by the designer. Complex circuits require more tracks and thus at some point more layers and yes also electro magnetic behaviour will require the use of planes in the PCB which results into more layers. But it's all an electronics designers decision.
@@eurocircuits will it's work well in class A amplifier, it generate high heat? Your PCB circuit board is looks so cool and advance but I like to know for heat dicipation what material you prefer to use in particular cases?
@@babydove For heat dissipation there are various option: Insulated Metal Substrate (ALU based single sided circuit - www.eurocircuits.com/ims-pool-orderpooling-for-insulated-metal-substrate-boards/ ) or FR-4 boards with a heat sink paste solution ( www.eurocircuits.com/pcb-design-guidelines/#heatsinkpaste ). Best to take contact with our customer service department in Mechelen to discuss your needs in detail. euro@eurocircuits.com or +32 15 28 16 30 or via live chat on www.eurocircuits.com
Там на 11:45 мой заказ показали. Шутка 😀.
Actually it is automated serigraphy is not another but designing is different thing.
Designing boards is indeed a very important and complicated task. The quality of any board or end product carrying this board depends on the quality of the design. But making a good design is not possible without knowledge of how boards are made. Any digital design must be physically made at some point in time and therefore knowing the limits of what can be done is needed. It is our goal to help designers to acquire as much of this knowledge as possible by informing them of manufacturing techniques and constrains. www.eurocircuits.tv
@@eurocircuits but the process means step by step and in order way how to do what it is. Knowledge will be inadequate without step by step
@@ufukbarlin6963 This film is the updated version of www.eurocircuits.com/making-a-pcb-pcb-manufacture-step-by-step/ Each of these steps will be explained in detail on Eurocircuits.tv as the year progresses. Examples: www.eurocircuits.tv/category/electronic-manufacturing-technology/ and www.eurocircuits.com/pcb-design-flow-optimized-and-pcb-cam-in-the-eccloud/ etc... Company websites offer so much more info than one film on RUclips can. Hope you find what you need.
Thank you.....
I used to do some of those stuffs for Johnson Matthey from the U.K!! Then all moved to china, singapore, indonesia, and malaysia for slave labors...
Eurocircuits is still very much in Europe with our manufacturing - www.eurocircuits.com/why-choose-eurocircuits/
If you are that much hi-tech Hi-QA fair prices then why do I still see many of RUclipsrs makers are interesting to promote Chinese PCB factories all time to do their prototypes ???
We cannot answer this for the RUclips content makers but the fact that we do not pay them will play an important role :-)
Eurocircuits .... If the marketing business needs to do that payment to gain customers and be market dominant then why not paying them ??.... This is business..... By the way , most of those RUclips makers are not getting paid but they have credits or discounts for their promotions and no down payment.... To be more honest with you, your way of business flow and cost make such small businesses fly away to China which welcome every cent no matter what or how to gain it and this lead by time to make that Chinese name a big name and market leader.... I wish humbly that you could listen and change a bit to deal with such competition level and not always thinking of big fat customers and orders ,,,, but Europeans keep deaf for advises ...
@@ahmedalshalchi For 30 years already, Eurocircuits has searched for ways to drive the price down for PCBs and now Assembly of PBCs, prototypes and smalle series and thus have shaped the market in Europe. With 12.000 yearly active customers in Europe we can state that most of them are not "FAT" as you call some of them. We are indeed humble and welcome every customer even with one single order, as we have always done. And we invest tons of Euros in free tools to help the electronics designer to make his protos "Right First Time" which saves time and money.
We doubt fair costs are the reason for the fears Asian competition. The absence of a level playing field is or do you really believe that 2$ for 10 PCBs is a realistic price? These days even 0$ can be achieved, you just pay the transport. In Europe, we do not fight with the same weapons and we are not subsidised neither. We have published about this on various occasions but we have the impression that only few people want to see the real reasons for the differences. Here are some articles:
www.eurocircuits.com/blog/reaction-on-some-extreme-chinese-prices/
www.eurocircuits.com/blog/european-electronics-industrys-addiction-to-chinese-supply-is-dangerous/
Eurocircuits .... OK .... 2 questions please ;
1- Do you accept payments by Western Union and Money Gram methods ?
2- Does your sales and marketing dept. have the willing to discuss and chit-chat with customers all day time even without gaining many orders ?
@@ahmedalshalchi 1. Sorry these methods are not known to us here in Europe. We accept Visa and Mastercard. We do apologise, but our explicit focus is on the European market which does not mean we won't help others as well with our PCB service. www.eurocircuits.com/payment-methods/
2. We have a live chat on our website, eurocircuits.com and are always happy to help via any communication method (although this one via RUclips is not our usual method and is not monitored by our customer service neither).
Apart from that, eurocircuits.com is probably one of the best lexicons on PCB technology and free to use as are our online tools which are available as soon as you have a customer account which of course is also free to make one.
Why do people always use the same kind of dumb elevator music? how about some narration explaining what's going on?
I'm right there with you on that!
I wouldn't like to be in an elevator with that music :D
A pitty spending so much effort into a good video and then not adding a voiceover with explanations. Only half job done.
Music out narration in.
,, I hi mam class 5th