@@SuchetB SmallRig do this one amzn.to/3R7QdFu SmallRig and a universal holder which will fit smaller drives like the SanDisk E61 amzn.to/3xQje1P hope that helps. The universal one is a bit more useful if you have a few different types of drives. Hope that helps.
@@stevelitton The same mambo. I found it used at a great price (looking to recoup that $500 I lost by being an early buyer.) But of course, the spanner is missing.
@@lanceevans1689 Nice, it's a decent cage. Don't worry you can actually pick those up in these hex and plate sets if you did want one at some point, they are really handy - amzn.to/3iZXpZq I saw people on RUclips trying to tighten tripod screws with the wrong end of those screwdrivers and snapping them 🤦
Great review. I had the Zacuto for my GH5 and Found it really hard to use and not well thought out. I’ve had my eye on the black mamba and think now I will pull the trigger and purchase.
That cage is so small and minimalistic. I like cages so that I can mount the HDMI cable and handles. Although, I agree not on the right side as the natural grip is perfect. Maybe you'll need to purchase a specific HDMI cable lock separately. BTW, that camera strap on right side sits right on the crook of my thumb. I think I will remove it too. Thank you.
Yes, it is nice and barebones, its rare I ever left the cage on my GH5 but this one spends much more time on the camera because its just lighter and less intrusive. I usually just remove those clips and then replace one with a quick release wrist strap.
Like I say, it's still the best designed cage out there currently. It really makes you realise how bad the old design was when you go back to use the old version.
Just got mine today. My primary need was just to have a cold shoe mount for audio gear, though it's nice for low angle filming. Did I miss something in the video, is there a place to store that Allen wrench in the rig like the other tool?
Ah I didn't get that in my set, maybe that is part of the full set. I only got the flat head / small screw tool (M3 2.5) that fits in the bottom magnetically. The set was pretty minimal to be fair, no instructions etc.
Great content as usual Steve. May I ask you a question, I was planning to use a lav mic (Senheiser) and an omni too, both at the same time with the XLR adapter. Is there any bracket to do that, I mean, is it even possible with that smallrig or another? Thanks from Spain!
Thank you, I really appreciate it. I don't use the XLR-1 but when I run out two mics I tend to mount them on a dual cold shoe mount which I mount to the cage using this type of thing - amzn.to/39qffzJ There are all kinds of things you can mount to a cage, it really depends on the size of the mics and practicality of accessing and using them.
My GH5 small rig cage allows me to fit my XLR1 on as well as a 15mm rod which I mount a monitor and mic on ... I can't see one that allows me to do that ...
I don't own the XLR-1 adapter but I think the shape of the cage would stop it from sitting on the hotshoe. SmallRig do a different shaped cage for the GH6 but I am not sure if that would work. I think that would be one for their support team.
Hello, I thank you to share this interesting video. Out of curiosity: with thsi cage and its handle, is it possible to put the eye on the viewfinder? Or does the handle move the eye away or disturb the view? This is an important thing for me. Thank you
Hi, I use my left eye for the viewfinder and can use it with the cage no problem. The cage doesn't really protrude at the back the handle can be moved to either side or you could just use a side strap instead if it was getting in the way.
I don't have the S5IIX but the GH6 has internal pro res options, 4K 120 fps, HD 300fps and better stabilisation and lens adaptability. There are obviously advantages to full frame though and some nice new features in that camera.
Steve, I want to use my strap sometimes when I go out or when shooting with a tripod is not possible. Do you know if small rig makes something that attaches to the cage so I can use the strap in the same way as I would without the cage?
Hey, the cage does have mounting points for a top or right side strap. You could mount most ring type connections to it. I'm not sure if SmallRig make one but I use a third party wrist and neck strap and it works just fine. Just be aware that the cage does add some weight to your wrist or neck if you plan to work that way for long periods of time.
@@stevelitton Hey Steve Thank you for getting back to me. After I wrote you I did figure that out and put my strap there and it's pretty and works well. The only drag is I'd like it so I attach and re attach without all that work. I'm sure I'll get it down to a few minutes. Would you mind sharing with the name of your 3rd party strap.
I use these quick release adapters amzn.to/3HKzaYC they are a poor mans Peak Design alternative. For my main strap I would use the HoldFast Money Maker if I am holding 2 cameras and for one I usually use a leather single strap or a cheap BlackRapid type strap like this amzn.to/419gKr9 It does the job and the pocket on it is handy. The leather straps are much more expensive but the quality is good and they look much smarter for paid work. Hope that helps.
@@stevelitton Ahhhhhhhhh very cool. Yes I can use these. I'll just strap them to my small rig cage strap slits. I get it. Thanks. I am so happy about these.
I ordered originally from AliExpress as they had them in stock really early or so I thought. It still wasn't dispatched after 2 weeks and then I saw 2 pop up on Amazon and grabbed one cancelling the other order. But the stock is so inconsistent at the moment.
I kind of see those two tools as having different use cases. The handle is more for run and gun work where you need low angles. The XLR-1 is better suited to controlled environments like interviews where you can mount the mic to a stand off the camera, place it correctly and have more time to monitor and adjust the audio levels. If you did want the cage and the XLR-1, you could use a side handle/s. Hope that helps.
@@stevelitton The image quality on the Sony A7S III is really cinematic but the lens are more expensive specially the GM lens by Sony. Panasonic GH6 has more frequent software updates and add new features.
I have this cage and I liked the GH5 one better. Mine came with no instructions and I had a hell of time (took a long time to figure it out and was fearful I was scratching my new camera with all the attempts. NO mention that one has to take off the strap button off and no mention of using the little screw anywhere. Now that the insulation nightmare is over I like the cage but not nearly as much as my Smallrig Gh5 cage. I'll learn to use it and love it I suppose. In the box was nothing. No diagram, no warrantee card, no instructions. Nothing. I bought it straight from them. Boo
Really, I much prefer this version. I did find it a bit odd that there were no instructions with mine. I had seen people complaining the camera spins in the cage because they didn't realise it had a secondary locking point. I do agree they could do with packing some instructions.
@@stevelitton Hey Steve, I found out something mind blowing. I wonder if you already know about it. In custom mode setting # 4. Do you know you can have up to 10 as opposed to the 3 that is in there? I was so happy to learn this and I never heard anybody talk about it and I've watched every video out there. Let me know.
@@sutv6754 Ah yes, you can set them in the custom mode settings to have more on the C4 dial. I have put something together on that feature but I haven't gotten around to uploading it yet. I split out C4 as a separate video because it works slightly differently from the first 3 in that it houses multiple modes within one dial setting. I don't think I will ever need 13 custom modes but it is nice to have them available!
Great review but please, you need to stop with the "ehms"! You say "ehm" almost every sentence, sometimes multiple times in a sentence. It's quite distracting and annoying!
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
Its one of my favourite cages on any camera and it makes you love the amazing GH6 even more!!!!
Yeah, it's a great additional to the camera, my camera has spent the majority of its time in the cage.
@@stevelitton mine too - do you know of any good ssd card holders that can be attached to the smallrig cage?
@@SuchetB SmallRig do this one amzn.to/3R7QdFu SmallRig and a universal holder which will fit smaller drives like the SanDisk E61 amzn.to/3xQje1P hope that helps. The universal one is a bit more useful if you have a few different types of drives. Hope that helps.
I got mine yesterday. I'm glad you showed how to take off the strap handle. The cage will stop me from hitting the front record button.
Hopefully you managed to get it off the camera easier than I did :)
Thank you Steven. I just got one and needed your great video to confirm some of its setup.
Glad you found it useful, which cage did you go with?
@@stevelitton The same mambo. I found it used at a great price (looking to recoup that $500 I lost by being an early buyer.) But of course, the spanner is missing.
@@lanceevans1689 Nice, it's a decent cage. Don't worry you can actually pick those up in these hex and plate sets if you did want one at some point, they are really handy - amzn.to/3iZXpZq I saw people on RUclips trying to tighten tripod screws with the wrong end of those screwdrivers and snapping them 🤦
Great review. I had the Zacuto for my GH5 and Found it really hard to use and not well thought out. I’ve had my eye on the black mamba and think now I will pull the trigger and purchase.
Thank you, I was hesitant as it's quite pricey but it will last the lifetime of the camera and it's not something you buy and then upgrade.
That left strap holder ring was annoying to take off but i got it off. Thank you for making this video.
Yeah, it's a bit of a pain. No worries, glad you found it useful!
That cage is so small and minimalistic. I like cages so that I can mount the HDMI cable and handles. Although, I agree not on the right side as the natural grip is perfect. Maybe you'll need to purchase a specific HDMI cable lock separately. BTW, that camera strap on right side sits right on the crook of my thumb. I think I will remove it too. Thank you.
Yes, it is nice and barebones, its rare I ever left the cage on my GH5 but this one spends much more time on the camera because its just lighter and less intrusive. I usually just remove those clips and then replace one with a quick release wrist strap.
I think your video convinced me to not get the small rig cage. Thanks for taking the time to made the video.
Like I say, it's still the best designed cage out there currently. It really makes you realise how bad the old design was when you go back to use the old version.
Just got mine today. My primary need was just to have a cold shoe mount for audio gear, though it's nice for low angle filming.
Did I miss something in the video, is there a place to store that Allen wrench in the rig like the other tool?
That allen key wrench is part of the UURig handle. That is a separate bit.
@@stevelitton but they include it with this 🤣was hoping the top handle had a storage spot, but if not, at least I don't feel stupid for not finding it
Ah I didn't get that in my set, maybe that is part of the full set. I only got the flat head / small screw tool (M3 2.5) that fits in the bottom magnetically. The set was pretty minimal to be fair, no instructions etc.
Great content as usual Steve. May I ask you a question, I was planning to use a lav mic (Senheiser) and an omni too, both at the same time with the XLR adapter. Is there any bracket to do that, I mean, is it even possible with that smallrig or another? Thanks from Spain!
Thank you, I really appreciate it. I don't use the XLR-1 but when I run out two mics I tend to mount them on a dual cold shoe mount which I mount to the cage using this type of thing - amzn.to/39qffzJ There are all kinds of things you can mount to a cage, it really depends on the size of the mics and practicality of accessing and using them.
@@stevelitton You´re very kind Steve, thanks again!
My GH5 small rig cage allows me to fit my XLR1 on as well as a 15mm rod which I mount a monitor and mic on ... I can't see one that allows me to do that ...
I don't own the XLR-1 adapter but I think the shape of the cage would stop it from sitting on the hotshoe. SmallRig do a different shaped cage for the GH6 but I am not sure if that would work. I think that would be one for their support team.
Hello, I thank you to share this interesting video. Out of curiosity: with thsi cage and its handle, is it possible to put the eye on the viewfinder? Or does the handle move the eye away or disturb the view? This is an important thing for me. Thank you
Hi, I use my left eye for the viewfinder and can use it with the cage no problem. The cage doesn't really protrude at the back the handle can be moved to either side or you could just use a side strap instead if it was getting in the way.
Out of interest what are the advantages of shooting on GH6 compared to full frame Panasonic S5IIX?
I don't have the S5IIX but the GH6 has internal pro res options, 4K 120 fps, HD 300fps and better stabilisation and lens adaptability. There are obviously advantages to full frame though and some nice new features in that camera.
@@stevelitton GH6 has more lens too
Yeah definitely a fair amount of mft lenses on the market.
Steve, I want to use my strap sometimes when I go out or when shooting with a tripod is not possible. Do you know if small rig makes something that attaches to the cage so I can use the strap in the same way as I would without the cage?
Hey, the cage does have mounting points for a top or right side strap. You could mount most ring type connections to it. I'm not sure if SmallRig make one but I use a third party wrist and neck strap and it works just fine. Just be aware that the cage does add some weight to your wrist or neck if you plan to work that way for long periods of time.
@@stevelitton Hey Steve Thank you for getting back to me. After I wrote you I did figure that out and put my strap there and it's pretty and works well. The only drag is I'd like it so I attach and re attach without all that work. I'm sure I'll get it down to a few minutes. Would you mind sharing with the name of your 3rd party strap.
I use these quick release adapters amzn.to/3HKzaYC they are a poor mans Peak Design alternative. For my main strap I would use the HoldFast Money Maker if I am holding 2 cameras and for one I usually use a leather single strap or a cheap BlackRapid type strap like this amzn.to/419gKr9 It does the job and the pocket on it is handy. The leather straps are much more expensive but the quality is good and they look much smarter for paid work. Hope that helps.
@@stevelitton Ahhhhhhhhh very cool. Yes I can use these. I'll just strap them to my small rig cage strap slits. I get it. Thanks. I am so happy about these.
@@sutv6754 They are really handy. Just give the reviews a read for each type. I haven't had any issues with mine though.
Wonderful cage!!!, I'm waiting for my unit to arrive!! i have uurig hand placed on my zcam.
I had a bit of a wait for that cage to arrive, it seems that are in very short supply over here. I am guessing due to international shipping issues.
@@stevelitton Here in Spain the same thing happens, I wait for it on April 26th!!
I ordered originally from AliExpress as they had them in stock really early or so I thought. It still wasn't dispatched after 2 weeks and then I saw 2 pop up on Amazon and grabbed one cancelling the other order. But the stock is so inconsistent at the moment.
@@stevelitton I have ordered it on amazon, last Friday they put some stock, it is time to wait until the 26th.
@@Kawaiivisualcreative hopefully they get some stock in and it comes before 🤞
I just purchased the XLR-1 adapter for my GH6 so none of these cages are going to work for me if I want to attach a handle on top.
I kind of see those two tools as having different use cases. The handle is more for run and gun work where you need low angles. The XLR-1 is better suited to controlled environments like interviews where you can mount the mic to a stand off the camera, place it correctly and have more time to monitor and adjust the audio levels. If you did want the cage and the XLR-1, you could use a side handle/s. Hope that helps.
So the XLR1 WILL fit on here with the cage on...just not with the top handle mounted, correct? Thanks for the great demo video!
i have . very nice
You should use a screen protector for the display 😅
I probably should, I never use screen protectors though, not even on phones or tablets. I just don't really get on with them.
@@stevelitton yes I know what you mean I just have OCD to keep my gear like new 😝
@@stevelitton The image quality on the Sony A7S III is really cinematic but the lens are more expensive specially the GM lens by Sony. Panasonic GH6 has more frequent software updates and add new features.
I have this cage and I liked the GH5 one better. Mine came with no instructions and I had a hell of time (took a long time to figure it out and was fearful I was scratching my new camera with all the attempts. NO mention that one has to take off the strap button off and no mention of using the little screw anywhere. Now that the insulation nightmare is over I like the cage but not nearly as much as my Smallrig Gh5 cage. I'll learn to use it and love it I suppose. In the box was nothing. No diagram, no warrantee card, no instructions. Nothing. I bought it straight from them. Boo
Really, I much prefer this version. I did find it a bit odd that there were no instructions with mine. I had seen people complaining the camera spins in the cage because they didn't realise it had a secondary locking point. I do agree they could do with packing some instructions.
@@stevelitton Hey Steve, I found out something mind blowing. I wonder if you already know about it. In custom mode setting # 4. Do you know you can have up to 10 as opposed to the 3 that is in there? I was so happy to learn this and I never heard anybody talk about it and I've watched every video out there. Let me know.
@@sutv6754 Ah yes, you can set them in the custom mode settings to have more on the C4 dial. I have put something together on that feature but I haven't gotten around to uploading it yet. I split out C4 as a separate video because it works slightly differently from the first 3 in that it houses multiple modes within one dial setting. I don't think I will ever need 13 custom modes but it is nice to have them available!
@@stevelitton Looking forward to that video. I won't them all but many more for sure.
This video bro. Top long, but yh. Derailed
😕 well I'll keep working at it
Great review but please, you need to stop with the "ehms"! You say "ehm" almost every sentence, sometimes multiple times in a sentence. It's quite distracting and annoying!
Cheers, noted, I have been trying to improve on that 🙂