Amazing. I've just bought a 2nd hand 1000 SE '22 and I'm excited and confident to perform this undressing! I've watched several videos about it but this is the best one by far! Thank you so much Andy.
Today I've put in practice all these procedures from Andy as I had to get access behind the dashboard to connect a mobile/charger holder and replace the usb socket for a better one. I was a little nervous at the beggining but I was able to undress and dress my bike back again without any problems. Thanks a lot Andy! I'd couldn't do it without your useful video!
Just awesome. I have just fitted a sat-nav to the spare connectors under the fairing. Refitting I had 2 spare fasteners..... this absolutely could not have come at a better time. Thank you so much
Thank you very much for this video. Starting next week I want to install a navigation device on my new Versys 1100 SE. I also need to adjust the headlights (lamps). At the moment they are still shining too high. I will definitely have to remember where I unscrewed the screws so that I don't have any problems when putting it back together. I have already seen some of your Versys videos. They all really help me. Thank you very much. Greetings from Hanover, Germany.
just subscribed.. great vids. i just bought a 2019 1000 SE LT and plan on doing the maintenance myself. now i find myself waiting for your complete engine rebuild video... :)
Hello 😉 I just became the owner of this beautiful motorcycle. I immediately subscribed to your channel. It's obvious that you work very professionally, there are fewer and fewer people like that 💪💪💪 greetings from Poland 😉
@@MotoAndy ooooooooooo, skąd tak dobrze znasz język polski? Musimy koniecznie się poznać 😁 Może będzie ku temu okazja,bo wybieramy się z żoną do Holandii w czerwcu 😉 może jakieś spotkanie i rady co ciekawego można tam zobaczyć 😉
@@Marcinciecierski629 no cóż rodzimego języka się nie zapomina 😉 w czerwcu będę się szwędał versysem po Anglii także może być trudno, no chyba że będziesz pod koniec czerwca.
@@MotoAndy zobaczymy co czas pokaże 😁. Gdzie znajdę jakiś namiar do Ciebie? Mam kilka pytań odnośnie Kawy,a z takim fachowcem napewno będzie o czym pogadać 😉
@@Marcinciecierski629 w opisie do kanału jest link do profilu na facebooku i tam możesz napisać przez messengera, na natychmiastową odpowiedź raczej nie licz bo na chwilę obecną mam więcej zajęć niż godzin w dobie.🫣 Pzdr
Hoi Andy blij dat ik je kanaal heb gevonden ben sinds 21/4/22 ook een trotse bezitter van een (nieuwe) versys 1000s. En doe net als jij alle onderhoud zelf. En jouw filmpjes maken het voor mij stukken makkelijker. Bedankt en ga zo door.
@@MotoAndy Thats nice. Two times a year would be enough working. Maybe I need Versys to do the same. I just game back from the work with little tour on icy country roads near Kuopio with CRF300 RALLY. Highways are not in snow anymore but we can still have winter rally fun here in Finland. Waiting for summer and summer holidays. Would like to fly with my RÄKSÄ chopper but it is still too slippery for it.
Great. I would like to instal the KAPPA crash bars and I dont know how is possible disconnect the press studs? It is needed some special instrument for it? Thanks for advice....
Hi Andy... Thank you for an amazing video. Qestion for you please. Other than exterior differences, are there any other differences between 2018 model and current model ?
Yes of course, SE model have ride by wire+cruise control, electronic SHOWA suspension, full LED lights and many more small things. Versys 2018 was smooth to ride, but SE model is even beter, so yep, Im happy with it.
Hi Andy, Thank you for the great video going to use this when I got my GIVI bars next month. I have a question, if you don’t mind? Your front forks, have you ever raised or lowered them through the yolks? I have a 2020 SE, and I am not sure if they are set at the stock height, I got it with 850 miles on the ODO. How much of the fork tube is showing past the top of the yolk on your bike?
Man man man nu weet ik waarom het arbeidsloon zo duur is, al dat plastic verwijderen kost je al een hoop tijd. Waarom heb je niet direct bv. je mistlampen er op geplaatst ?
Salut tout le monde J'ai fait un accident et j'ai besoin d'un nouveau body kit pour mon versus 650 2021. Quelqu'un peut me dire ou je peux le trouver en ligne. Merci
I thought you had a reason to undress it, maybe to add/change some stuff. But then you said "now time to put it back together" lmao. Did you undress it just for a youtube video? For us? Good stuff!
I think new gen is better design, better plugs, all screws and latches are in accessible places, kawasaki did their homework, I haven't broken anything and that's a good sign😉
Amazing. I've just bought a 2nd hand 1000 SE '22 and I'm excited and confident to perform this undressing! I've watched several videos about it but this is the best one by far! Thank you so much Andy.
Today I've put in practice all these procedures from Andy as I had to get access behind the dashboard to connect a mobile/charger holder and replace the usb socket for a better one. I was a little nervous at the beggining but I was able to undress and dress my bike back again without any problems. Thanks a lot Andy! I'd couldn't do it without your useful video!
your welcome my friend
Just awesome. I have just fitted a sat-nav to the spare connectors under the fairing. Refitting I had 2 spare fasteners..... this absolutely could not have come at a better time. Thank you so much
Thank you!
This is the mist important video about the Versys 1000 for the user that want access to work in it.
Все гениальное просто.Спасибо за урок.Являюсь владельцем Версис 1000-2022 года.
Thanks once again. This video helped me undress the left side to route my Garmin cable. No leftover hardware or broken panels.
Just finished installing a zumo xt on my Versys. This vid was very helpful with how the plastic is removed. Appreciate it!
Just fitted some crash bars to my Versys. That was really helpful Andy. Thank you for your efforts 👍
Your very welcome, enjoy your crash bars, just don`t try them right away ;-) Ride safe
@@MotoAndy 😁👍
Thank you very much for this video. Starting next week I want to install a navigation device on my new Versys 1100 SE. I also need to adjust the headlights (lamps). At the moment they are still shining too high. I will definitely have to remember where I unscrewed the screws so that I don't have any problems when putting it back together. I have already seen some of your Versys videos. They all really help me. Thank you very much. Greetings from Hanover, Germany.
@@schwarzfahrer763 your very welcome and good luck with all the jobs 👍
You're video was so helpful, just having a minor panic attack and I've managed to sort it out! THANK YOU!
Thank you very much for this great video Andy. Just what I need. You had a lot of work to do this video. Regards from Betanzos (Spain)
Your welcome
Thanks Andy! This was extremely helpful. Keep up the good work 😄
brilliant video Andy, never had a bike so complicated to remove a couple of bits of plastic
You must have never owned a BMW bike then 🥴
just subscribed.. great vids. i just bought a 2019 1000 SE LT and plan on doing the maintenance myself. now i find myself waiting for your complete engine rebuild video... :)
Hello 😉 I just became the owner of this beautiful motorcycle. I immediately subscribed to your channel. It's obvious that you work very professionally, there are fewer and fewer people like that 💪💪💪 greetings from Poland 😉
Cześć Marcin. Dzięki za dobre słowo🙂 gratulacje nowego nabytku i niech się dobrze sprawuje, witaj w Versysowej rodzince.👊💪 LWG.
@@MotoAndy ooooooooooo, skąd tak dobrze znasz język polski?
Musimy koniecznie się poznać 😁
Może będzie ku temu okazja,bo wybieramy się z żoną do Holandii w czerwcu 😉 może jakieś spotkanie i rady co ciekawego można tam zobaczyć 😉
@@Marcinciecierski629 no cóż rodzimego języka się nie zapomina 😉 w czerwcu będę się szwędał versysem po Anglii także może być trudno, no chyba że będziesz pod koniec czerwca.
@@MotoAndy zobaczymy co czas pokaże 😁. Gdzie znajdę jakiś namiar do Ciebie? Mam kilka pytań odnośnie Kawy,a z takim fachowcem napewno będzie o czym pogadać 😉
@@Marcinciecierski629 w opisie do kanału jest link do profilu na facebooku i tam możesz napisać przez messengera, na natychmiastową odpowiedź raczej nie licz bo na chwilę obecną mam więcej zajęć niż godzin w dobie.🫣 Pzdr
Love your videos! You saved my projects many times.
Hoi Andy blij dat ik je kanaal heb gevonden ben sinds 21/4/22 ook een trotse bezitter van een (nieuwe) versys 1000s. En doe net als jij alle onderhoud zelf. En jouw filmpjes maken het voor mij stukken makkelijker. Bedankt en ga zo door.
Graag gedaan. 🙂
Again another great video Andy, Kawasaki should be paying you.
Gran vídeo, explicado perfectamente con todo detalle, el mejor de los que he visto, felicidades Andy
Simply brilliant. Exactly what I needed
Hi there, tanks for the great and informative video. You are the best..👍👍👍
Nice video.
Extremely helpful for Versys owners.
Ps. That is how you do it every day and clean your bike before you ride to work😂
Fortunately I don't have to ride everyday to work with my bike, so I undress Versys only 2 times in a year 😉 cheers
@@MotoAndy Thats nice. Two times a year would be enough working. Maybe I need Versys to do the same.
I just game back from the work with little tour on icy country roads near Kuopio with CRF300 RALLY.
Highways are not in snow anymore but we can still have winter rally fun here in Finland.
Waiting for summer and summer holidays. Would like to fly with my RÄKSÄ chopper but it is still too slippery for it.
Andy, fantastic video!!!
Desde Argentina. Fantástico. Versys 2022
Felicidades 🎉! Me ha resultado de gran ayuda. Muchas gracias!
Great video, very useful. Thank you 👍
Wow, gracias por compartir, me había falta un tutorial como éste
Thank you for an excellent video, very helpful
Vídeo perfecto, me ha ayudado mucho, Gracias
Andy you are the best on Versys 1043 !
Love this, easy to follow, hopefully no broken bits when i try this lol
Great. I would like to instal the KAPPA crash bars and I dont know how is possible disconnect the press studs? It is needed some special instrument for it? Thanks for advice....
Watch this video at 4.40
ruclips.net/video/J0wjb10l4OI/видео.html
@@MotoAndy thank you !!!
Super Schrauber - Anleitung !!👍👍👍
Hi,
Do you know where the accessory socket is on the Versys? Thank very much
watch this video ruclips.net/video/6XoMZAmup78/видео.htmlsi=w-NXaOER26yVEcD4
Buenas tardes.
Me podrías informar de como desconectar el conector eléctrico de la toma de mechero?
Gracias!
mira este video tal vez veas algo mas
ruclips.net/video/sZE8yxlP7Xg/видео.html
@@MotoAndy Gracias! ✌
Güzel Video🤩👏👏👏
Good work 👏👏👏
Hi Andy...
Thank you for an amazing video.
Qestion for you please.
Other than exterior differences, are there any other differences between 2018 model and current model ?
Yes of course, SE model have ride by wire+cruise control, electronic SHOWA suspension, full LED lights and many more small things. Versys 2018 was smooth to ride, but SE model is even beter, so yep, Im happy with it.
Hi Andy,
Thank you for the great video going to use this when I got my GIVI bars next month.
I have a question, if you don’t mind?
Your front forks, have you ever raised or lowered them through the yolks? I have a 2020 SE, and I am not sure if they are set at the stock height, I got it with 850 miles on the ODO. How much of the fork tube is showing past the top of the yolk on your bike?
Amazing 😍
Hi from Australia. Just wondering how long it takes you to undress, and re dress the bike please.
It took me all day because I had to make a video for you 😂but seriously, you should be able to undress and dress in 3 hours, with a coffee break.
@@MotoAndy Thank you, and thanks for taking the time to make the video for us. Coffee break/s are an essential part of motorcycle maintenance. :)
Andy 👍👍👍
Thank you Andy a thousand times over!
Your welcome 🙂
Thank you !!!!!
Thanks you
Muitos obrigados.
Super
Man man man nu weet ik waarom het arbeidsloon zo duur is, al dat plastic verwijderen kost je al een hoop tijd. Waarom heb je niet direct bv. je mistlampen er op geplaatst ?
Heb Ik wel gedaan 😉
@@MotoAndy Haha, er klopt wel meer niet, ik zag aan het einde van deze video dat opeens ook weer de top koffer plaat er niet meer opzat.😉
Salut tout le monde
J'ai fait un accident et j'ai besoin d'un nouveau body kit pour mon versus 650 2021. Quelqu'un peut me dire ou je peux le trouver en ligne.
Merci
I thought you had a reason to undress it, maybe to add/change some stuff. But then you said "now time to put it back together" lmao. Did you undress it just for a youtube video? For us? Good stuff!
I had a reason, actually I had many reasons.😉
@@MotoAndy ooooh, go on then, do tell 😬
videos on the way, be patient my friend.
Wow. So soon. 😀 which one was easy to undress old gen or new gen?
When i look at this i think the old one but Andy loves tinkering on his Bikes.😁
I think new gen is better design, better plugs, all screws and latches are in accessible places, kawasaki did their homework, I haven't broken anything and that's a good sign😉
Thanks man this is great,I am anout to change out my crappy indecandescent blinkers for some LED’s..