It's a great device! It's the Belkin Boost Charge pro, I filmed a video about it a few months ago! I still use it and is one of my favorite magsafe chargers. ruclips.net/video/qq6fsW8Qb5M/видео.html&ab_channel=ConstantineKnowsTech
I bought the Spigen Ultra Hybrid T but I have a problem with my wireless charger - when I have the case on it does not charge properly. The charger is a 3in1 Anker MagGo. I previously had an iPhone 13 pro with a Spigen MagSafe case and it worked flawlessly with the charger, but the combination of this case and 16 pro does not work. So it leads me to the conclusion it's the case fault, because if I take it off it charges just fine. Did you try it with different chargers?
First off, I'm sorry to hear about that - that's a frustrating experience. I only tried it with the Belkin MagBoost charger, which is a wireless magsafe charger and it worked just fine. I assume that it's a fault with the case, could you return it and try a new one? This shouldn't be happening with this case, especially if it's the magsafe variant.
Some reviews of the Apple silicone cases for the 16 series say they are more lint/dust resistant than previous models. A new coating perhaps? I've ordered one to check it out. Might give the Spigen a go too. Thanks 😊
@avfc1956 I’ve been using it for the last week or so and I’ll say that it is definitely more lint/dust resistant than before. I think it also doesn’t show fingerprints as much. That being said, it still is silicone so it eventually does pick up dust/animal fur. It looks quite slick though. I just got a new spigen case, stay tuned for a video shortly - Thanks for watching!
@wayne69wayne69 I’ll say that it is more durable/drop resistant than a minimalist case - the raised edges on the front and camera housing definitely protect it. It doesn’t have the same protection level as a more rugged case. It’s a good balance of minimalist yet protective, probably well suited for everyday use/office environment but not a construction site. I hope that helps!
Great question! When using the flashlight/flash, the top of the clear case does light up a little bit and show a little light. That being said, when I tried it out with photos/videos I didn’t notice any impact.
@CharismaSpencer they've gotten better year over year but I would say that all clear plastic cases yellow over time. Spigen also sells a frosted black version which should be more resistant to yellowing.
It stays on the phone very firmly, I have no issues whatsoever. It's much better than the apple case since it has full coverage, including the base where the charger is. Another benefit is that it has raised edges on the corners/camera housing so it even rocks less when laying flat.
@柚恩 honestly this is probably one of the lighter cases! Some cases I tried were closer to 50g. I think that the Spigen Ultra Hybrid (not the “T” version) that does not have the camera control cover would probably be a little bit lighter.
@@mehrabjubo878 I would go with Spigen. Although Apple's clear case is good, it's twice as expensive and it doesn't cover the bottom of the device, making it less protective. Spigen also offers this case in a black option so hopefully that one doesn't have the same tenancy to turn yellow. I hope this helps!
Very fair point! The color is quite beautiful. They also sell this clear case without any camera control cover, I copied it here in case you wanted to check it out - a.co/d/4dfKhTE
Great video! Love the homage to some other RUclips greats. Keep the content coming. 💪🏾
You know we have to shout out Floss with the the cases.
What’s the name of the charging dock that you use for your phone? I like it.
It's a great device! It's the Belkin Boost Charge pro, I filmed a video about it a few months ago! I still use it and is one of my favorite magsafe chargers.
ruclips.net/video/qq6fsW8Qb5M/видео.html&ab_channel=ConstantineKnowsTech
Black has also a Frost back. Hate those finger stains
I agree, I wanted to order the black but it wasn’t available until late October!
I bought the Spigen Ultra Hybrid T but I have a problem with my wireless charger - when I have the case on it does not charge properly. The charger is a 3in1 Anker MagGo. I previously had an iPhone 13 pro with a Spigen MagSafe case and it worked flawlessly with the charger, but the combination of this case and 16 pro does not work. So it leads me to the conclusion it's the case fault, because if I take it off it charges just fine. Did you try it with different chargers?
First off, I'm sorry to hear about that - that's a frustrating experience. I only tried it with the Belkin MagBoost charger, which is a wireless magsafe charger and it worked just fine. I assume that it's a fault with the case, could you return it and try a new one? This shouldn't be happening with this case, especially if it's the magsafe variant.
I Love spigen products!!
They’re quite good!
I pick one up…thanks for your review
And thank you for watching!
Some reviews of the Apple silicone cases for the 16 series say they are more lint/dust resistant than previous models. A new coating perhaps? I've ordered one to check it out. Might give the Spigen a go too. Thanks 😊
@avfc1956 I’ve been using it for the last week or so and I’ll say that it is definitely more lint/dust resistant than before. I think it also doesn’t show fingerprints as much. That being said, it still is silicone so it eventually does pick up dust/animal fur. It looks quite slick though. I just got a new spigen case, stay tuned for a video shortly - Thanks for watching!
@@ConstantineKnowsTech is it durable and drop resistant???
@wayne69wayne69 I’ll say that it is more durable/drop resistant than a minimalist case - the raised edges on the front and camera housing definitely protect it. It doesn’t have the same protection level as a more rugged case. It’s a good balance of minimalist yet protective, probably well suited for everyday use/office environment but not a construction site.
I hope that helps!
Does it cause any light reflection on the camera when taking picture/video with flash light at night?
Great question! When using the flashlight/flash, the top of the clear case does light up a little bit and show a little light. That being said, when I tried it out with photos/videos I didn’t notice any impact.
Do these yellow?
@CharismaSpencer they've gotten better year over year but I would say that all clear plastic cases yellow over time. Spigen also sells a frosted black version which should be more resistant to yellowing.
Does it stay on the Phone firmly? The official Apple Clear Case rocks around the phone ever so slightliy, which I hate
It stays on the phone very firmly, I have no issues whatsoever. It's much better than the apple case since it has full coverage, including the base where the charger is. Another benefit is that it has raised edges on the corners/camera housing so it even rocks less when laying flat.
How heavy it is? Above 30g?
It’s about 36g
@@ConstantineKnowsTech thanks, way more heavier than I thought….
@柚恩 honestly this is probably one of the lighter cases! Some cases I tried were closer to 50g.
I think that the Spigen Ultra Hybrid (not the “T” version) that does not have the camera control cover would probably be a little bit lighter.
Is this a pinky destroyer?
It is not! It’s quite comfortable and made of a soft material.
Strange they don’t make it for 16 & plus.
It’s a bummer, Spigen is choosing to make certain cases only for the pro models. I think it’s a bad look and neglects a huge customer base.
Nice review. I'm a Flossy fan and I appreciate you giving him credit for his sayings 🙂. Subscribing for support. Best of luck Constantinos.
Thank you for watching! And Floss is one of the greats, I have to give credit to where it’s due.
I have the same case and unfortunately after two or three months it turned yellow on the edges
The unfortunate truth with clear cases - I expect this one to do the same unfortunately. Looks great when it’s new though!
Does it turns yellow?
I would say although an improvement to previous years, this one will still yellow over time.
@ConstantineKnowsTech which one should I buy? Apple one or Spigen?
@@mehrabjubo878 I would go with Spigen. Although Apple's clear case is good, it's twice as expensive and it doesn't cover the bottom of the device, making it less protective. Spigen also offers this case in a black option so hopefully that one doesn't have the same tenancy to turn yellow. I hope this helps!
Great Video!
Thank you!
Shame the camera control button is white, it put me off buying it.
I totally get that, it definitely “pops”. Fortunately Spigen does sell one in black, hopefully that one is a bit more subtle?
@@ConstantineKnowsTech I don't want to hide my Natural Titanium colour!
Very fair point! The color is quite beautiful. They also sell this clear case without any camera control cover, I copied it here in case you wanted to check it out - a.co/d/4dfKhTE