Cheers just what i needed i pressed my bearings on bothsides and left no way for strengthening tube to fit in the middle of the axle thats on heavy duty ebikes cheers👍
Depends on the hub. If the race is shaped to handle the round bearings. You would also need a cone nut to hold the bearings in place and make adjustments. 👍👊
It can but since the axel is standard in these vintage bicycles I would imagine they're pretty much the same. Always measure the inside diameter of the middle hole and the outside diameter as well. Also measure the thickness. 👊👍
I had thought remove axel , use a drift to knock out old bearing. The bearings must press in and trap the axil. So what's the trick?? I'm old and not as smart as I used to be. Woppes
Here's another short you may like: ruclips.net/user/shortsmGNeYUmVFF8?feature=share
What size of the bearing this please.many thanks for your response
Bro I felt that hammer hitting the finger
Not that bad! Thanks for the comment. 👍👊
Thanks so helpful 👍👍
Glad it helped thanks for the comment! 👍👊
Cheers just what i needed i pressed my bearings on bothsides and left no way for strengthening tube to fit in the middle of the axle thats on heavy duty ebikes cheers👍
Excellent! Glad it helped 👍👊
I would use a large nut and bolt to press the bearings back on.
Good suggestion, thanks for the comment. 👍👊
Hello good day to you, just want to know what size of the bearing?
Very smart man. Thanks
You're welcome! Glad it helped. 👊👍
Thank you friend, it's the best video from me
I'm glad you like it and thanks for the comment! 👍👊
Pregunta: cualquier masa de rin se le pueden poner ese tipo de balero sellado? O tiene que cambiarse la masa ?
Depends on the hub
.Hey, you saw when he hammered his fingers.😅😅😅😂😂😂
Luckily, I missed my fingers! 😆👍👊
Спасибо! Вы просто гений!!! Спасибо!
Thanks for the comment, your welcome 👍👊
Is this bearing hub or converted from normal hub ?
This was not converted. It was always a sealed bearing hub. 👍👊
i have that same hub the question is how to remove the bearing cups?because i want to convert it to sealed bearings
Replied to your earlier request. Thank you. 👊👍
Can i convert it normal hub to berring hub?
Depends on the hub. If the race is shaped to handle the round bearings. You would also need a cone nut to hold the bearings in place and make adjustments. 👍👊
How to insert the bearing to the right depth, only with a washer, you will not go deep enough ?
It actually places it even with outer edge of the hub.
Is the size of bearing same or varies from bicycle to bicycle
It can but since the axel is standard in these vintage bicycles I would imagine they're pretty much the same. Always measure the inside diameter of the middle hole and the outside diameter as well. Also measure the thickness. 👊👍
@@BicycleRestorationMan Thank you
@@venkateshshanbhag8310 anytime 👍👊
nie ma to jak na kanapie w salonie naprawy ;-)
Tak, to jedyny sposób! 👍
Good method for Novatec HB series hubs .
Thanks for the comment Robert! 👊👍
bearing size?
Sorry, don’t remember the size. The bike is in storage now.
Mulțumesc !
Your welcome. Thanks for the comment! 👊👍
Bearing size
Sorry, made this a while ago and not sure of the bearing size.
Bonkers!
Thanks for the comment Robert! 👍👊
My sealed bearings on my bob trailer are not turning well. The problem is that the axel is not removable.
Can you at least change the bearings?
I had thought remove axel , use a drift to knock out old bearing. The bearings must press in and trap the axil. So what's the trick??
I'm old and not as smart as I used to be. Woppes
Put the bearings in the freezer and use a torch or even a heat gun to warm up the axle where the bearing goes and it will fit right in
What is the number of bearing
These are sealed bearings so there are 2, one on each side. Thanks for inquiry Michael. 👊👍
Use a socket better than a washer, or u hammer damage the bearings not the race
Thanks for the comment! 👍👊
❤❤❤❤❤❤
Thanks for the like! 👍👊
Bearing no?
Not sure what your asking.
@@BicycleRestorationMan means bearing's size?
@@gnjrastogi3085not sure of the bearing size.
The song ahhh 😻
Thanks for the like! 👍👊
You're welcome
Bearing number
The bike is in storage and I do not have any of those bearings around. Sorry.
Good way to flat spot the bearings.
There being replaced! 👍👊
If the bearings are made of tinfoil 😆
А если ещё и подшипник с одной стороны разобрать и в него побольше смазки добавить, то это будет вечность.
That it would! 👍👊