Hi there I have recently bought a Morris minor and find your video’s really well explained and very helpful you are helping very much service my moggy keep up the great video’s I’ll be watching many thanks Sean 👍
Excellent. I was always taught to check the valve clearances first making a note of which ones were out of adjustment so you knew the improvement would be made. From memory valve adjustment was every 12,000 miles.
Is there any chance you could do a video on replacing the distributor? Your way of explaining and showing things makes it simple even for a novice to learn to do these things.
I've just bought a 1970 saloon and found this really helpful and easy to follow. Any chance you could do a vid on stripping down and cleaning up the Carburettor please?
Had an 69 MGB that I bought new .Uses the same procedure. Not sure if the clearance is the same. Surprised to see cork gaskets still being used. They work just as good, just need to handle them a little more tenderly.It was an easy engine, and, car to work on.
cheers, and in answer to your Question - No, you do not need to readjust the valve timing, given that your adjusting the rockers a tiny amount, back to where they should be set, bringing all the valve timing back to normal.
great video il be doing this on my moggy next week now I know how to how easy is it to put a brake fluid resivoiur into the engine bay and have you got a video to show how it's done.
its an easy job to do, sadly i havent a video on how to do that job, as i had already done it on the van a few years ago, when the next opperetunity comes up to do it i will of course do a video :)
whilst doing a coolant change on my minor, i was unable to drain any water from the engine drain tap. as it has been taken off. the hole is now closed by a bolt which is a half inch long. after poking about inside with a wire tool there was no coolant came out and i couldnt feel a blockage inside. it felt metalic inside. the wire went in about 2 inches. and came out covered in black gunge which looked like old engine oil. what has happened here please.
sounds very much like the coolant hasnt been changed for a good few years, its possibly sludge if water has been put into the coolant mix, in all honesty im not 100% sure without seeing it for myself, however it is a common feature for the engine coolant taps not to work.
My moggy recently starts coming out from first gear, I can hear a loud bang when it comes out ,but drives fine in all other gears, any guess why it's doing this.
Авто/Мото
Hi there I have recently bought a Morris minor and find your video’s really well explained and very helpful you are helping very much service my moggy keep up the great video’s I’ll be watching many thanks Sean 👍
I could watch these videos all day. I especially liked the phone call at the critical moment
Good video.I remember there was a rubber gasket option for the Austin A 40 -55- and 60 Probably the morris engine too. Viewing from westcoast Canada.
Excellent. I was always taught to check the valve clearances first making a note of which ones were out of adjustment so you knew the improvement would be made. From memory valve adjustment was every 12,000 miles.
Is there any chance you could do a video on replacing the distributor? Your way of explaining and showing things makes it simple even for a novice to learn to do these things.
will do when i next do one :)
It would have been nice to hear the engine running a before and after to show the difference that the adjustment makes to the running of the engine
I've just bought a 1970 saloon and found this really helpful and easy to follow.
Any chance you could do a vid on stripping down and cleaning up the Carburettor please?
when we next do one, we will :)
Had an 69 MGB that I bought new .Uses the same procedure. Not sure if the clearance is the same. Surprised to see cork gaskets still being used. They work just as good, just need to handle them a little more tenderly.It was an easy engine, and, car to work on.
actually good work broo Ihave morris minor traveller, next time can you explain how to service ventilation system
Done this a few times - great explanation. Points next?
Cheers Gordon, We'll see ;)
Great video. Nice and clear instruction.
Q. Once the rockers are set, is it necessary to adjust valve timing? Thanks in advance.
cheers, and in answer to your Question - No, you do not need to readjust the valve timing, given that your adjusting the rockers a tiny amount, back to where they should be set, bringing all the valve timing back to normal.
great video il be doing this on my moggy next week now I know how to how easy is it to put a brake fluid resivoiur into the engine bay and have you got a video to show how it's done.
its an easy job to do, sadly i havent a video on how to do that job, as i had already done it on the van a few years ago, when the next opperetunity comes up to do it i will of course do a video :)
Good to have a spare cover so one can put in gasket well in advance and the sealer has more time to take hold
if only i had a spare one, of course, i could have always cleaned and prepared the over as soon as i took it off :)
whilst doing a coolant change on my minor, i was unable to drain any water from the engine drain tap. as it has been taken off. the hole is now closed by a bolt which is a half inch long. after poking about inside with a wire tool there was no coolant came out and i couldnt feel a blockage inside. it felt metalic inside. the wire went in about 2 inches. and came out covered in black gunge which looked like old engine oil. what has happened here please.
sounds very much like the coolant hasnt been changed for a good few years, its possibly sludge if water has been put into the coolant mix, in all honesty im not 100% sure without seeing it for myself, however it is a common feature for the engine coolant taps not to work.
My moggy recently starts coming out from first gear, I can hear a loud bang when it comes out ,but drives fine in all other gears, any guess why it's doing this.
sounds like a worn selector or first gear