@@thediverofother2 This motherboard only supports its own power supply as it does not have a standard atx power supply connector So you can use only its own power supply. If you switch to tower casing then you cannot use the powers supply of the tower case. So I won’t recommend changing the case
На самом деле у меня не было инструментов, необходимых для установки новых заклепок. Поэтому я снял только те детали, которые можно будет легко установить позже.
This man is an amazing master in his job. With his help, through online consultation, we repaired two APC 5KV UPS controller board. . Only after describing the problem, he immediately showed us the damaged part... Now both of UPS working like a new. Lots of thanks and recommendations from me. I want everyone who has had problems with UPS devices, to know about him. He has an expert knowledge. That's why I write this comment on all his videos. I spent 4 nights without sleep looking for the problem. 👍 👍👍
I don't think that this casing has enough space. You can only fit the psu that has the same size as in this one. For upgrading the psu, you might upgrade the casing as well
@@aliffaathir2095 rx 460 suits this pc, you just need to cut the gpu bracket and reverse the position of the heatsink on the proc and then plug in the gpu
@@SLUMD0GG Thanks for subscribing. I have another video on this pc in which I added a graphics card and ssd to this pc. You can see it for more details about upgrading. ruclips.net/video/nj2r6pfz1IY/видео.html ❤❤
Why are you tearing this system down? Does it work? I have one and it works perfect running Windows 7 Pro Offline for older programs. Has a 500 GB SSD. Mine is a core i3-3220 CPU @ 3.30 Ghz and 16 GB memory. I have a 3rd gen i7 I could put in it as soon as I find my thermal paste.
This is a pre-built pc and comes with its own motherboard. It is small form factor, which means standard ATX or Micro-ATX motherboards won't fit in the case. Note that the motherboard has its own power supply connector specifically built for its own psu. To find a compatible replacement motherboard, it's best to consult HP or authorized service providers for the specific model's motherboard.
Hi, I want to upgrade the motherboard of my hp compaq to the latest motherboard. Is it possible? If yes, what do you recommend?
am asking if i can remove the mother board and put it in other pc case and i get and new power supply will it fit
@@thediverofother2 This motherboard only supports its own power supply as it does not have a standard atx power supply connector
So you can use only its own power supply. If you switch to tower casing then you cannot use the powers supply of the tower case.
So I won’t recommend changing the case
Need to search for left side case..
Hmm.
awesome thanks. EXCELLENT tutorial - great little surfing / budget office pc
Glad you liked it!
Молодец. Вопрос до конца не раскрыт. Теперь высверливай заклепки на корпусе.
На самом деле у меня не было инструментов, необходимых для установки новых заклепок. Поэтому я снял только те детали, которые можно будет легко установить позже.
This man is an amazing master in his job. With his help, through online consultation, we repaired two APC 5KV UPS controller board. . Only after describing the problem, he immediately showed us the damaged part... Now both of UPS working like a new. Lots of thanks and recommendations from me. I want everyone who has had problems with UPS devices, to know about him. He has an expert knowledge. That's why I write this comment on all his videos. I spent 4 nights without sleep looking for the problem. 👍
👍👍
Thanks for the video. Where can you get those screws from that are in the 3.5" hard drive (that enable it to be mounted there)?
Pl approach to your local computer market.
if i want to upgrade the PSU, what suits best on this casing?
I don't think that this casing has enough space. You can only fit the psu that has the same size as in this one. For upgrading the psu, you might upgrade the casing as well
does GTX 750ti/RX 550 suits this PC ?
You can check online for the power supply requirements. If psu is enough, and the gpu is small form factor, then yes it can support
@@AKElectroTech can I change the case tho? because it's kinda hard to find any low profile VGA with my budget
@@aliffaathir2095 rx 460 suits this pc, you just need to cut the gpu bracket and reverse the position of the heatsink on the proc and then plug in the gpu
Nice vid, also do you know how much ram it comes with?
I bought a refurbished pc, and there was 8gb of ram installed. Also the amount of ram can vary according to the seller.
@@AKElectroTech ok thank you very much, I am planning to get this pc and add another 8 gb into it, otherwise than that, thanks. Also, I subscribed.
@@SLUMD0GG Thanks for subscribing. I have another video on this pc in which I added a graphics card and ssd to this pc. You can see it for more details about upgrading. ruclips.net/video/nj2r6pfz1IY/видео.html
❤❤
Why are you tearing this system down? Does it work? I have one and it works perfect running Windows 7 Pro Offline for older programs. Has a 500 GB SSD. Mine is a core i3-3220 CPU @ 3.30 Ghz and 16 GB memory. I have a 3rd gen i7 I could put in it as soon as I find my thermal paste.
I just tore it down to show what's inside and how to disassemble and assemble it. Although it works fine.
My motherboard is stuck how do i get i out i have all screws removed
Pull it a bit harder. Just don't break. There might be something left behind that is keeping motherboard in its place.
Which motherboard fit in this case plse provide me the name of motherboard
Reply please
This is a pre-built pc and comes with its own motherboard. It is small form factor, which means standard ATX or Micro-ATX motherboards won't fit in the case.
Note that the motherboard has its own power supply connector specifically built for its own psu.
To find a compatible replacement motherboard, it's best to consult HP or authorized service providers for the specific model's motherboard.
Nah it's a BTX case and board.
Bro model or what type of smps is used here
It's a 240 watt power supply. Don't know in detail about it.
Is he a low profile case or not
Yes it is low profile
C'est quoi ce liquide sur la carte mère
I cannot understand it. Can you please ask in English?
How much for this pc i have a one but i want to know the price
in pkr it's about Rs. 20,000
with core i3 3rd gen
8 GB ram
500 GB hdd
without gpu
hi sir, support nvme or just sata?
sata. for nvme, try using expansion card
Brother cai i use in this i5 3rd gen processor ❤
Yes, you can use
i3 2nd and 3rd gen
i5 2nd and 3rd gen
i7 2nd and 3rd gen
All of these can be used with this computer
I have cpu and ram some generation can you send me the case I live in pakistan karachi I am poor i need it for school
I have only one for the pc. you can get for very low price from old pc scrap shops
But you does not need the case for running the computer, it can run without that