Rc F1 Boat with Real Outboard Motor Mercury Racing 360 full 3d print
HTML-код
- Опубликовано: 7 фев 2025
- STL file cults3d.com/:2...
####Mercury Racing 360 Outboard Engine###
-This outboard has a height of 20cm
-Suitable for hulls above 70cm, I will make many hulls that fit this outboard Engine! so you can make lots of rc boats with just one engine
-I used a 3670 motor, this outboard can use motors up to 4076 (not tested yet).
-this outboard can adjust trim position on mounting and and can be adjusted the height from hull
-gear lubricant hole for easier to fill the lubricant after playing
-easy to print without any support and pre orianted
-need 400grams of filament (pla) used abs for motor mounting
-have a great watercooling system
Print Setting:
-min print area = 200x140x50
-nozzle = 0.4
-layer hight = 0.15 lower is better for high quality
-perimater = 5 wall line
-top/bottom = 5
-infill = 30%
-support = no
BOM:
-bevel gear shaft 4mm 15t 0.8 2pcs ( a.aliexpress.c... )
-bearing 604zz 1 pcs ( a.aliexpress.c... )
bearing 684zz 5pcs ( a.aliexpress.c... )
shaft 4mm 30cm
rigid couple joint 4x5 (depending on the motor you use) ( a.aliexpress.c... )
-drive dog 4mm ( a.aliexpress.c... )
-propeller up to 50mm (i use 40mm diamter) (a.aliexpress.c... )
-brushless motor up to 4076 ( i used 3670 2150kv)
heat insert m2.5 (2.5IDx3Lx3.5OD) 18pcs ( a.aliexpress.c... )
m2.5x5 18 pcs ( a.aliexpress.c... )
-m3 x35/40 2pcs with nut (for adjustable trim position)
-m2x3 self taping screw (for gear lubricant hole)
-push rod connector 2pcs for servo rod ( a.aliexpress.c... )
####F1 Hull PowerBoat####
-70cm length
-Nice desain and performance
-easy to build and print withoutsupport
-have a pin joint for each body to make easier to put it together
-need 1.300gram of pla
Print Setting:
-Min print area = 235x235x230
-nozzle = 0.4
-layer hight = 0.2 lower is better for high quality
-perimater = 2/3 wall line
-top/bottom = 4
-infill = 15%
-support = only servo mount
BOM
-m3x8mm 16pcs for battrey tray, esc tray, servo mount, and servo
-m3x25mm 4pcs and nut 4pcs for outboard mount
-m3x40mm 3pcs and nut 3pcs for cover
-Push rod or stainless stell Leader Fishing wire for servo rod
Electronic that i used
-Battrey 2pcs lippo 2s 5000mah
-Esc Flycolor 150a
-Servo 25kg waterproof
-dumborg 6ch transmitter
3D PRINTING SETTINGS
3d printer fdm
-nozzle = 0.4
-layer hight = 0.2 lower is better for high quality
-perimater = 4 wall line
-top /bottom = 4
-infill = 30%
-support = no
#f1 #outboard #mercury #rcboat #diy #3dprinting #3dmodeling #f1h2o #rc #casting
You are awesome, really cool machine design, thank you very much.👍🙏🙏🙏
Thank you so much, I'm glad you like it!🔥🔥
Great build man! Always wanted a tunnel hull boat!
@@VetteWay2Fast thank you so muchh🔥🔥
Fantastic - loved it 👋👋
Thank you so much🔥🔥
nice!
thank you so much 🔥
Good afternoon friend, I bought your boat to print the STL. I would also like to print this engine that you show. Can you tell me where I can download the STL so I can print it? I await your response.
available in description🔥
Hi, i bought your files and currently printing...
Can you share the specs of the 5000mAh 2S lipo?
What kind of C rating are they?
From the pictures it show 10C, bit i have a hard time to believe that. Otherwise you could do with a lower C rates ESC...
Please advise, thx.
I'll follow up with progress of the build
@@marcovangent it 5200mah 2s 35C
@@3dshopmedan super, thx!!
Would you print your engine for customers?
@@douggordon3096 yess
What are the details
@@douggordon3096 you can send me text to wa +6285156462372
make something original with you skill building and editing you will move mountains
thank you so much🔥
Would polyurethane spay work to coat it or not.
@@jadentalks5068 I use resin only to strengthen the hull