Just printed your model in PETG-CF and PLA (for the cover) at 125% for a 1/8 scale. Really good option as a test motor. Works a treat, so far nothing exploded or melted. Might upgrade the bevel gears to brass tho. Cheers
Great build !! 🤗 A spot of vaseline petroleum jelly on the gears might make them last longer... it makes a great lubricant & unlike normal greases, it doesn't cake and go hard... 😎👍☘️🍺
I'm a new subscriber. I built this out board motor but I threw in some brass gears. I have a video out with it on a small boat runs amazing thanks for sharing this.
Было интересно. Вот только мало в этом смысла. Попробуй сделать корпус лодки, установить, сделать измерения тяги, нужно будет увеличить длину дейдвуда, сделать антикавитационную плиту. А так конечно полще сделать просто мотораму и установить на дно лодки. Сделай водомëт!! Будет круто и можно использовать.
Good afternoon, how can I buy this outboard motor from you, it’s just my birthday and I really want such a motor, but I looked at ebeu but it’s very expensive there
May you have a good day! www.aliexpress.com/item/1005003725119536.html?spm=a2g0o.detail.0.0.2479ELPgELPgMx&gps-id=pcDetailTopMoreOtherSeller&scm=1007.33416.274820.0&scm_id=1007.33416.274820.0&scm-url=1007.33416.274820.0&pvid=a6de3887-6822-46fb-8df1-26d49e690fcd&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.33416.274820.0,pvid:a6de3887-6822-46fb-8df1-26d49e690fcd,tpp_buckets:668%232846%238115%232000&pdp_ext_f=%7B%22sku_id%22%3A%2212000026945066270%22%2C%22sceneId%22%3A%2223416%22%7D&pdp_npi=3%40dis%21THB%21512.63%21512.63%21%21%21%21%21%402101d1b316805242378001213e0038%2112000026945066270%21rec%21TH%21173671390 www.aliexpress.com/item/4000121770043.html?spm=a2g0o.productlist.main.35.474662d1hSCecx&algo_pvid=4150dbe8-764d-4e34-aeb7-36bdcc351c29&algo_exp_id=4150dbe8-764d-4e34-aeb7-36bdcc351c29-17&pdp_ext_f=%7B%22sku_id%22%3A%2210000000334965691%22%7D&pdp_npi=3%40dis%21THB%21273.06%21259.39%21%21%21%21%21%4021227f0f16805234863718291d087a%2110000000334965691%21sea%21TH%21173671390&curPageLogUid=f1K4eRUNb6Km
Hello Sir I am a student From india i am see your this video (Wiper Moter as a servo.)and i have some small Queshion in that can you please please help me to give the answers...??
Vous pouvez utiliser le moteur et le contrôle de vitesse dont vous disposez. hobbyking.com/en_us/turnigy-aerodrive-sk3-2118-3100kv-brushless-outrunner-motor-1.html
Very nice build. It's hard to find an outboard motor prebuilt so this is a great option.
@Bill Jones Nation Thanks.!!😁
Awesome print. Can you put metal gears in. Wonder how long the plastic ones will last. I'm sure this took a good while to do.
ฺฺI think this could, but need to find metal gear a similar size.
Just printed your model in PETG-CF and PLA (for the cover) at 125% for a 1/8 scale. Really good option as a test motor. Works a treat, so far nothing exploded or melted. Might upgrade the bevel gears to brass tho. Cheers
Sorry for the late reply. I'm glad you like it.
Great build !! 🤗
A spot of vaseline petroleum jelly on the gears might make them last longer... it makes a great lubricant & unlike normal greases, it doesn't cake and go hard...
😎👍☘️🍺
I am so very grateful for your guidance,
I'm a new subscriber. I built this out board motor but I threw in some brass gears. I have a video out with it on a small boat runs amazing thanks for sharing this.
Yeah; It's great thank you for subscribing.
Desde florencia caqueta Colombia un gran saludo
Cool. But why have the phase wires come out of the back? Out the front would be more realistic.
Thanks so much I was just testing.🙂
Nice looking egg beater you have there!
Thanks.😁
That's Flipping cool!
Thank you so much🙂
Why not aim the wires the other way? Like...into the boat instead of out the back of it?
Thanks, I was just testing
Your 3D prints are totally under extruded dude. :D
Thanks.😀
Need to build a volvo penta twin propeller outboard and inboard outboard system, 70% more efficient than a single blade propeller
I am so very grateful for your guidance,☺
Wires need to exit the shroud on the boat side, not rear of the cowling, otherwise spot on!
@Richard Billhartz Thanks😁
@@Mr.RC-Creator It's the best outboard on the internet, I'll print one when you post the files, thanks!
@@richardbillhartz4537 www.thingiverse.com/thing:3534935 thanks!🙂
Verry cool
Thanks.😊
Было интересно. Вот только мало в этом смысла. Попробуй сделать корпус лодки, установить, сделать измерения тяги, нужно будет увеличить длину дейдвуда, сделать антикавитационную плиту. А так конечно полще сделать просто мотораму и установить на дно лодки. Сделай водомëт!! Будет круто и можно использовать.
Я очень благодарна вам за ваше руководство,🙂
Ещё рекомендую использовать подшипники от RC моделей.
Great design and build
Only wondering why de wires stick out at the back in stead of the front
Thanks so much I was just testing.🙂
@@Mr.RC-Creator
Hola buenos día
No thrust bearing????
Won't be long before the thrust is pressing the bevel gears together...
No bearing, I'm looking for a replacement metal gear.🙂
Все хорошо,, но через валы воду будет поднимать наверх
большое спасибо😁
It's amazing. Great dude
Thanks😁
Is there a different engine u could use I can’t find this one
Sorry i reply late Link 🙂www.thingiverse.com/thing:3534935
That seems to have a lot of thrust would love to see it on a boat
Thanks you see this on a boat
@@Mr.RC-Creator Have you done it yet?
@@paulb9769 I'm done.
@@paulb9769 I have done it!😁
Yeah.
Love it! Great work!
Thanks🙂
Yo lo quiero 😮😮😮
No vendo Lo siento, gracias por tu interés.🙂
😢😢😢😢😢😢nooooooo
it seems like you resized the files in order to fit the gear to the 3mm shaft, or did you not? the diameter is 5mm in the printed gear.
You can adjust it by 55 percent, if I remember correctly it is 3 mm in diameter.
@@Mr.RC-Creator 55% percent resize? the shaft Outer diameter should be 5mm and inner is 3mm
How come you poked the wires out the back rather than the front of the motor housing?
I was just testing it working😁
What’s the purpose of the brass tube? Can I use bearings instead?
Support the axle or you can provide bearings instead.🙂
@@Mr.RC-Creator thank you, where do you buy all the rods? Online?
@@queenofpain6483 Yeah! 🙂
Very nice clean job!
Thanks😁
Good afternoon, how can I buy this outboard motor from you, it’s just my birthday and I really want such a motor, but I looked at ebeu but it’s very expensive there
May you have a good day!
www.aliexpress.com/item/1005003725119536.html?spm=a2g0o.detail.0.0.2479ELPgELPgMx&gps-id=pcDetailTopMoreOtherSeller&scm=1007.33416.274820.0&scm_id=1007.33416.274820.0&scm-url=1007.33416.274820.0&pvid=a6de3887-6822-46fb-8df1-26d49e690fcd&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.33416.274820.0,pvid:a6de3887-6822-46fb-8df1-26d49e690fcd,tpp_buckets:668%232846%238115%232000&pdp_ext_f=%7B%22sku_id%22%3A%2212000026945066270%22%2C%22sceneId%22%3A%2223416%22%7D&pdp_npi=3%40dis%21THB%21512.63%21512.63%21%21%21%21%21%402101d1b316805242378001213e0038%2112000026945066270%21rec%21TH%21173671390
www.aliexpress.com/item/4000121770043.html?spm=a2g0o.productlist.main.35.474662d1hSCecx&algo_pvid=4150dbe8-764d-4e34-aeb7-36bdcc351c29&algo_exp_id=4150dbe8-764d-4e34-aeb7-36bdcc351c29-17&pdp_ext_f=%7B%22sku_id%22%3A%2210000000334965691%22%7D&pdp_npi=3%40dis%21THB%21273.06%21259.39%21%21%21%21%21%4021227f0f16805234863718291d087a%2110000000334965691%21sea%21TH%21173671390&curPageLogUid=f1K4eRUNb6Km
Hello Sir I am a student From india i am see your this video (Wiper Moter as a servo.)and i have some small Queshion in that can you please please help me to give the answers...??
I will definitely recommend it to you.
Хороший мотор! Как такой сделать? Где найти программу для 3D принтера?
Какой тип 3D-принтера вы используете?🙂
Could you use PETG for the gears for better wear resistance?
I think that would be good
I did. PETG-CF They didn't melt yet.
Nice job would love to use this on my 3d printed boat, i wonder what it would be like printed in resin?
Thanks! resin will printable, the surface is much smoother.
That cavitation plate looks a little small tbh
Yep.. Thanks.😁
I've got an old die cast engine like that, but I don't run it.
@A3Kr0n Great, you should probably use it.😁
That cavitation plate is doing nothing, the prop should be under the plate not behind it
Thanks. 😅
@@Mr.RC-Creator No Problem, it's a minor thing that not too many people are aware of
+гибкую соединительную муфту и железные шестеренки
Да, вместо этого я ищу металлические шестерни.
@@Mr.RC-Creator присмотритесь к шестерням от дифференциалов автомоделей масштаба 1:10 или 1:12
@@ruslankerget Я очень благодарна вам за ваше руководство,
Hallo..gibt es die Stl Dateien irgendwo... danke Gruß
www.thingiverse.com/thing:353...
🙂
Danke super vielen Danke Gruß
Danke viele Grüsse aus Deutschland... Germany...3 d Drucker läuft schon
Very nice what are the measurements will you print some more for customers
Thanks! I measure the length of the Tube and drive shaft to be cut.🙂
Berapa harga kompetensi, mesin tempel.
your prop is taller than your aeration plate, gonna suck air on plane.
I am so very grateful for your guidance,🙂
Cek harga bg
BONJOUR JE N ARRIVE PAS A TROUVER LE MOTEUR ET CONTROLEUR POUVEZ VOUS ME M ETRE UN LIEN MERCI
Vous pouvez utiliser le moteur et le contrôle de vitesse dont vous disposez.
hobbyking.com/en_us/turnigy-aerodrive-sk3-2118-3100kv-brushless-outrunner-motor-1.html
Donde los puedo comprar
Macam mana kalau mau order..
Sorry for the late reply. Thank you for your interest, but I'm not for sale. Sorry.😁
BONJOUR AVEZ VOUS DES LIENS POUR L ARBRE DU Moteur hors-bord SVP MERCI
www.aliexpress.com/item/32998148718.html?spm=a2g0o.productlist.0.0.2bcd7213bv3k18&algo_pvid=c5815ea9-8fe8-4163-89ab-f51b516fa2a5&algo_exp_id=c5815ea9-8fe8-4163-89ab-f51b516fa2a5-18&pdp_ext_f=%7B%22sku_id%22%3A%2266917595769%22%7D&pdp_npi=2%40dis%21THB%21222.01%21222.01%21%21%21%21%21%402103255b16706672334093275e7526%2166917595769%21sea&curPageLogUid=nnd9v0eB1HnY
www.aliexpress.com/item/4000337533587.html?spm=a2g0o.productlist.0.0.69fb3010fDv9Ph&algo_pvid=26e29f39-62dc-4e02-98aa-8a10743191ce&algo_exp_id=26e29f39-62dc-4e02-98aa-8a10743191ce-35&pdp_ext_f=%7B%22sku_id%22%3A%2210000013712811036%22%7D&pdp_npi=2%40dis%21THB%21147.66%21118.13%21%21%21%21%21%402101e9d316706672842193584e653f%2110000013712811036%21sea&curPageLogUid=lnuEH8Qcn1Jr
@@Mr.RC-Creator AVEZ VOUS LE LIEN POUR LE MOTEUR AUSSI MERCI
LE TOUT EST POUR UNE REDUCTION A 65 % ?
PS ET LE RACORD DU MOTEUR A L ARBRE MERCI BEACOUP
@@leplaisiraletatbrut1513 www.thingiverse.com/thing:3534935 🙂
Ling pemesanan nya di mana bang
Not for sale, but you can do it yourself!
Me regalas un pliss
www.thingiverse.com/thing:3534935
can i order?
Thanks. but I don't sell it.
Bisa pesa
😁
8isa d beli d mna
มีขายไม่ครับ
ไม่มีครับ แค่ลำการทำงาน ...ครับ
Can you share the file
@Joe Gomez www.thingiverse.com/thing:3534935
Bisa order kak
Thanks.😊
Это очень быстро сломается.
Я ищу металлические шестерни для замены.
@@Mr.RC-Creator надо делать гибкий вал.
@@NevskiyVladislav Это хорошая идея. Большое спасибо.
Dijual gak bag
Yes. 🙂
also can i get the print files?
Link www.thingiverse.com/thing:3534935
It's great!
What boat will be?
@@ARCparamodels I have no idea.😅
@@Mr.RC-Creator ahaha
@@ARCparamodels But there has to be.😁
all measurements are wrong where is 58mm 37mm 3mm all wrong
Thanks.🤣
มีขายไม่ครับ
ไม่มีครับ แค่ทำทดสอบการทำงาน😁
มีขายไม่ครับ
ไม่ม่ครับแค่ลองเทสครับ