Lian Li Strimer V2 Plus 600 watt 12VHPWR RGB cables wiring guide and tips
HTML-код
- Опубликовано: 1 окт 2024
- In this video I'm showing off the Lian Li Strimer V2 Plus cables that are specifically designed for Nvidia's 40-series graphics cards and work with the 600watt PCIe connector. There are three different models available being shown here, so it's important to ensure you have the right one.
There are two cables which have that 600 watt 12VHPWR connector on both ends, this requires a PCIe gen 5 power supply unit with the right sort of connection OR a dedicated cable with that option. Alternatively you can get a cable that works with the three 8-pin PCIe connections you'd usually get from your power supply unit for graphics cards but then terminates into a 600watt connection style that connects to the GPU.
In this video I'm showing how these cables are installed, the logic for doing it, things to think about and how to avoid any issues.
Note that I've done a couple of videos on the previous Strimer cables and how those connect. To get the best out of these GPU cables you'll also need the control box that's included with the original 24-pin strimer cable:
Lian Li Strimer Plus V2 installation guide • Lian Li Strimer Plus V...
Lian Li Strimer Plus V2 review • Lian Li Strimer Plus V...
Please note links listed here include affiliate links which may earn me a commission. Find out more below.*
NewEgg - newegg.io/nc68...
Amazon US - amzn.to/3KA68wx
CaseKing - tidd.ly/4914uxW
Amazon UK - amzn.to/3GfjpI3
Overclockers - tidd.ly/3SsncZu
Amazon FR - amzn.to/3KcYBlU
Amazon IT - amzn.to/3Ke4PSt
Amazon DE - amzn.to/3nMCfjJ
Amazon CA - amzn.to/3m88Rno
Other stuff:
ASUS ROG MAXIMUS Z690 FORMULA motherboard - • ASUS ROG MAXIMUS Z690 ...
NZXT C1200 Gold ATX 3.0 PSU • NZXT C1200 Gold ATX 3....
Lian Li RGB not working? Here's the fix for L-Connect • Lian Li RGB not workin...
The new STRIMER PLUS V2 12VHPWR cables feature a custom design 12VHPWR male connector at the GPU end. The connector follows the ATX 3.0 standard of a 12+4pin with improvements to its original design to provide a stronger connection to the GPU, and uses materials to ensure the connector’s durability. Built with 16AWG wires to deliver up to 600W, the STRIMER PLUS V2 12VHPWR cables can sustain higher temperatures and sharper bends even when it is close to the connector. For extra bending tolerance, part of the connector housing can be removed to allow the extension cables to bend even closer to the connector and improve large GPU’s compatibility with narrow PC cases.
With ATX 3.0 power supplies, there are two STRIMER options which are built with a 12VHPWR female connection at the PSU cable end. The first one features a wider array of LEDS with 12 light guides and can be connected to an existing STRIMER L-Connect 3 controller into the 3x8pin slot for instant compatibility. The second option is slimmer with 8 light guides and is compatible with the 2x8pin slot of the existing STRIMER L-Connect 3 controller. For older PSUs without 12VHPWR, users can opt for the STRIMER PLUS V2 12VHPWR 12+4pin to 3x8pin. This gives the option to directly connect the STRIMER PLUS V2 to modern GPUs. Featuring 8 light guides, the STRIMER PLUS V2 12VHPWR 12+4pin to 3x8pin is compatible with the 2x8pin slot of the existing STRIMER L-Connect 3 controller.
See the official site here - lian-li.com/pr...
🏆Big thanks to my super awesome RUclips members:
SirSpawnsALot, Meatykeyboard, Beaster Bunny, JayShank007, Rawrr483, DStarastins, McFarty, Riggsy79, Chief Hao, Kraken Tortoise, Aaron Yarden, Paolo madamba, Space Cannons, Mike S, Kyle and Jason🏆
Want to send me things for videos or other reasons? Use this address:
The Provoked Prawn
PO Box 13277
MANNINGTREE
CO11 9BE
United Kingdom
🔫Sub to my gaming channel🔫 / @theprovokedprawnpews
Come check me out on Twitch - / provokedprawn
Join my Discord to keep up to date or ask questions / discord
Follow on Reddit / theprovokedprawn
Read this far? You're awesome. Smash those sub and like buttons!
📌 Support the channel:
😍 See the benefits of being a member here - / @theprovokedprawn
Get some merch - theprovokedpra...
Check out my dedicated Amazon Storefront to see my current fave gear - www.amazon.com...
📸 Recorded with amzn.to/3kYrhGP
PLEASE NOTE
Affiliate links*:
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions. 
Игры
![Lian Li 12VHPWR Strimer Plus V2 (PCI-E 5.0) [L-Connect-3]](http://i.ytimg.com/vi/7hH9TggabPc/mqdefault.jpg)
Other things featured in this video:
ASUS ROG MAXIMUS Z690 FORMULA motherboard - ruclips.net/video/hphew_XJj2Y/видео.html
NZXT C1200 Gold ATX 3.0 PSU ruclips.net/video/vNUmD8GQxSQ/видео.html
Lian Li RGB not working? Here's the fix for L-Connect ruclips.net/video/xmLIU40UOVI/видео.html
See deals (note these are affiliate links that earn me a commission at no extra cost to you):
NewEgg - newegg.io/nc6828bea8
Amazon US - amzn.to/3KA68wx
Amazon UK - amzn.to/3GfjpI3
Amazon FR - amzn.to/3KcYBlU
Amazon IT - amzn.to/3Ke4PSt
Amazon DE - amzn.to/3nMCfjJ
Amazon CA - amzn.to/3m88Rno
I couldn’t find the 12 light version
Dude you are killing it with product coverage. Already subbed and followed but it's crazy how the closer I get to finishing my build and looking stuff up the more I run into your content. Great stuff, keep up the good work!
Thank you 👍
I’m so confused
I wish they spoke to me like I was 5 instead of a pc expert sometimes
So was i just plug the lian li strimmer 12vhp into your gpu cable and connect the black and white cable to +5v D its usually down left on the motherboard and has 3 pins
Ok
what do you mean. i can understand fully?
😂😂
THANK YOU. Been trying to find a video showing how the Lian Li cables are connected to the power supply. I was fairly confident they were just extenders but I wanted to see someone actually plug it in to verify. Watched dozens of videos and you're the first to actually show both ends getting connected.
I aim to please :)
With the 4070TI there is a 12+4 pin to 2 x 8 pin adapter. For this card would you buy the 3 8pin strimer and connect all 3 of them or just leave one empty? It's just slightly confusing since the adapter that comes with the 4070TI only has 2 8 pin connectors.
Was wondering the same but you could get double sided 12vwpr and then have the adapter that your currently using on the end of that
Yeah, no one has given a solid answer on this. A few people on reddit have said they used the 3x8 pin and left a slot empty. This is the route I'm probably going to go, but I hate leaving that 3rd slot. Pretty large oversight on the part of Lian Li...
Buy the one with 2 12vhpwr connectors then use the one that came with your card.
@@l10n79 I don’t get what your saying, the card comes with a 2x8 pin so there would still be a slot empty
@@sick2426 You can use the adapter, so buy the one with two 12vhpwr connects, one for gpu and the other side goes to the adapter, then to PSU, forgoing the dual 8pin problem. The car will only pull what it needs so if you have more connectors it won't really matter. I have an amp airo extreme 4070ti with 3 and I use my adapter with this strimmer cable.
I know this is a old video but you save me soo much time i was looking for this 8:55 and you very much explained everything now i can buy the right stuff for my 4070ti gpu Thankyou so much.
Glad to help. Hope you enjoyed enough to subscribe 🦐
I really like how these cables are reversible. Removes all the guesswork from it, unlike those Cablemod adapters that I wasn’t sure which one to get because I wasn’t sure which GPU I’ll get, and both were in short supply..
I want to buy a new Strimer 12vhpwr. I have a 4070ti with 12vhpwr-2x8, pin cable. How can I connect? Buy 3x8 pin and leave one 8 pin empty?
Having the same question
I’m new to pc gaming/building and after doing days of research I have most of my build ordered expect the strimmer.
Just to make sure I’m understanding this correctly, the v2 plus 24 pin is for the motherboard and the 12vhpwr is for the 40 series gpu ?
Yes
Do you know if the 12vhpwr to 3 x 8 pin cables will work with a 4070 ti super? And if so, do I have to plug all the cables in?
I’m confused so
You can’t do it like he does it in the video with one cable connected to the strimmer
Do they have any that work with xfx 7900 xtx merc?
yes, just buy the regular Strimer plus V2 triple 8pin adapter that they have (model number: PW12-PV2).
hi i have colorful igame 4070 super ultra and it has 12pin. i have a dual 8pin strimer v2. can i connect them through the 12vhpwr?
Do the cables work with Rx 6700 XT gpu
Can I also use the Lian-Li Strimer Plus V2 12VHPWR 3x 8 with only two 8 pin connectors ?
i got a ASUS ROG Strix GeForce RTX 4090 BFT OC Edition with 1x 16 pins but if i count the pins its 6 next to each other and 2 rows of them so with one do i need to buy the 12vhpwr to 12vhpwr with 12 light guide ?
when I saw Lian Li's video presenting these about an hour ago, I was like "hmm I wonder when the Provoked Prawn will give us a video about these new cables..." and here it is !!! Thank you for making amazing videos like that it's very precise and SUPER usefull ! you basically made my gaming setup and it's perfect
Amazing. That's a nice thought process. I hope others have it too. Glad I helped! Thanks for watching.
Please refrain from using spaces just before an exclamation or punctuation mark.
@@correctthatfilthygrammarYeah, he should correct that filthy grammar.
Hello please can someone help me I’m getting a 4080 super with this same strimmer but how do I connect it into my psu if it doesn’t have the 12vhpr in the psu
11:43 I watched your video and finished assembling it. Thank you for making a helpful video. I have a question. I heard that there is a problem that the 12vhpwr cable can melt in a narrow case. Is it okay to use only the rgb cable by disassembling the 12vhpwr cable and the rgb cable? I'm trying to use the pure one included in the power package for the 12vhpwr cable.
I WAS thinking of installing these but after seeing this, he'll no. Don't have time for such complications. Plus it's purely cosmetic. I thought they WERE the power cables, it's just a mask.
i have the strimer v1 in my current build, but i wont put them into my new clean white phanteks nv7 build. they would be just too much rgb
I’m planning to get one of these for my ROG 4080 Super OC White but I don’t know which one I need. I have a Lian-Li Edge 1000W PSU
Very thanks for such descriptive overview
Hi i have the corsair shift series 1000w psu with a maxinus dark hero mothetboard what pin would i need? Thanks
Do i have to connect those to 5V RGB or just the usb header? Cuz I don’t wanna use motherboard’s software
If I don't use the Lian li hub controller and connect directly to the motherboard will that works ? And where I can controll it ?
2:18 - Why is there written "20 + 4", when there are all together 28 pins? Can anyone explain me that?
What pin should i use for my Gigabyte Rtx 4060 aero oc ? Anyone?? Thanks!
Christ its sickening how large some of these GPUs get. BTW, vertical GPU mounting shaves a few degrees of temps vs horizontal. Just did a Furmark stress test. I have the same case as you.
Its just the cooler that is big
How would I use one of the triple 8 pin versions of this 12vhpwr to connect to the 4070ti? Since the 4070ti only needs 2 8 pins to power the gpu do I need to plug in 8 pin power connectors into all 3 of the 8 pin connections on the Strimer?
Having the same question
I have a gigabyte mobo, if I plug them in my mobo will I use rgb fusion?
My strimer does noy click in my GPU and if I pull it cable out it just comes off. I an worried that this is not safe. I am using 4070 Ti TUF and strimer plus v2 8 light guide
now if they would just make their cases wide enough that i can use the side panel without pinching the cable coming out the side of my 4090
The 40 series has made things tricky for cases. Should push nice future changes though.
@@TheProvokedPrawn It would not of been as bad if Nvidia had the cables coming out the rear or bottom. There is some nice right angle plugs adapters but far as i know none have come to market yet.
Great video! Very informative, easy to follow and cleanly presented.
I'd like to point out that it's definitely best practice to use 3 separate cables over split cables from PSU to GPU, as shown at 10:08.
The 6950 XT would not run without issues while using a split cable, and I would estimate the same results with a 40 series card, even though their required wattage is lower.
You saved my PC!! I’ve seen so many of your videos and each one, step by step, helped me complete my build for my first pc. So much to learn about different components and builds from one channel. Keep up the amazing work 👌
Quick question , I have a RM1000x PSU and am thinking about getting a 4080 Super . Which of these Strimer cables would I get?
Do you have the 12vhpwr connector with that PSU with a single connector on either end? If so, there's a strimer cable with the same logic.
Hi, I have a question:
My power supply doesn't have a 12VHPWR connector, I'm using 3 PCIe power cables with an adapter (3x8pin to 12VHPWR adapter, came with my 4080).
Is it possible/recommended to use the top strimer shown in 1:07 (the "12VHPWR to 12VHPWR") together with the adapter I'm already using? So in the end the wirings go like this:
PSU 3x8 pin -> 3x8pin to 12VHPWR adapter -> Lian Li 12VHPWR to 12VHPWR Strimer -> GPU
Or should I stick to the strimer at the middle in 1:07 (the "12VHPWR to 3x8-pin")? In such case, the wirings would be:
PSU 3x8 pin -> Lian Li 3x8-pin to 12VHPWR Strimer -> GPU
The second one
@@TheProvokedPrawn thanks
Dude, you are a hero! I was desperate because my Strimer Plus wasn't turning on the LEDS. After watching your video I discovered that it was just a matter of moving the switch that comes on the controller. I did this and the LED turned on!!! Thank you very much.
I aim to please
@@TheProvokedPrawn Keep up the great work! Thx =)
What if you plug both into the hub? Where do you put the switch? Thanks
You kinda sound like Henry Cavill. You both have a very similar voice
I only have two usb on the bottom which I’m using one for the aio pump and the other one for the inf fans dock. I plug this one into the PSU but I can’t control it .
ruclips.net/video/d8vELbWWaCQ/видео.html
I know that a long time ago of this video but I want to buy for my GPU 3090 ti I have 12 on one side and 3x8 connectors of the psu I can use that one that shows in the video because I'm searched for a day and everyone talks about the series 40, that has 12v and 3x8
Hey, will this cable work with RTX 4090 Gigabyte Aorus Xtreme Waterforce.? Bcz this card comes with and "16-pin to four 8-pin power adaptor". So I'm planning to buy that card and also this strimer cable. My psu will be MSI MPG A1000G.
Love your channel and informative videos - especially the the intricate wiring for Lian Li Fans etc. I am struggling at the moment to establish which Strimer cable I need for the Gigabyte 4070ti Super Aero 16Gb card I have just bought. There are different versions of the power connectors and the technical spec for the card talks about 1 x 16pin connector but the Strimer has versions Strimer plus V2 16-8 pins and Strimer plus V2 16-12 pins. - can you help me determine the one I need please? Keep up the good work :-)
Is it supposed to make a click sound when you connect it? I plugged the new power connector on my 4090 and there is no click.
@theprovokedprawn would you recommend using a strimmer right now with all the melting cables on a 4090 gen 5 psu? And will the li work with th new Corsair software? Link I believe . I’m building a new 4090 i9 and want to use these but is it safe right now?
I've been using one with my 4090 since I made this video and have no melting.
@@TheProvokedPrawn ok I’ll give it a shot , thanks much!!
PLEASE can you help me to get the right cables for my setup
- PNY GeForce RTX 4090 24GB XLR8
- Coolmaster MWE 1250 gold
- GIGABYTE Z790 AORUS Master DDR5
thank you
Hopefully someone can help me out, I have a 4070ti would the 3x8 pin plugin version work for my card? Since the card only requires 2x8 pcie plug-ins to the 16 pin adapter ? Would I use all 3 pcie cables from my PSU to the lian li cable or just 2 ? (My psu also doesn’t have the 16 pin 600w cable plug-in option so I’m trying to figure out how to upgrade to this cable and which one to get) any advice or knowledge is super appreciated
Does anyone know if i can use the Corsair 600W PCIe 5.0 12VHPWR Type-4 PSU Power Cable with my rm850x with the Strimer 12VHPWR 12+4-Pin Cable V2 connected to a 4070ti.
I’ve got a 4070 Aero. One 16 pin from the card into 2x8 pins into my RM750X psu.
Can I just take the 16 pin out of the GPU currently and connect into the strimer, then plug the other end of the strimer into my GPU? Haven’t bought yet and not fully clued up.
Can I put the strimer plus v2 PCIE 5.0 to (adapter) PCIE 5.0 Power Cable 16Pin (12+4) to 2x8Pin that comes with the GPU and then after that to the PSU?
can the strimer be plugged into another lian li controller? such as one that came with the three fan kit?
No
So with the 3 pcie of the cable can you use one 8 pin to pcie and the other 2 daisy chained 8 pins to a 12vhpwr ?
Do they take 600wats so if I have a 850 psu and my pc takes up 500w ima need a 1200+ way psu???
I just got the asus dual 4070. What Strimer should I get if I also have the 850w lian li psu?
Quick question: Power Unit Corsair RM850 doesn't have a 12VHPWR. But my GPU came with a splitter (?) from 12VH male to 2x 8pin female. Can I connect it to 2 PCIe/CPU slots on the power unit ?
Then you'd want the strimmer that has the two PCIe 8 pin connectors at one end and 12vhpwr at the other. Don't try to connect that adapter directly to your PSU
Can I connect to the PCIe (x2) port-to-port adapter that comes with the GPU and connect it to the Power Supply RM1000X?
What if you plug both strimers into the hub? Which way does the switch go?
Did you ever find the answer to this? Wondering the same thing.
Do you connect all those usb cables in or just one?
Do I need to use all 3 8pin PCIE on the strimer cables or will 2 be ok?
Is it able to use 2 of the L3 connectors for a third cable and does the lian software recognise the 2nd connector? I want to get of the rgb stripes of the third cable, tie them up somehow with the Cpu cable of the PSU and get the same light effects like on the other ones.
will this work without ARGB header? my mobo''s RGB header is 12v 4 pin.
Yes if you use the controller
@@TheProvokedPrawn Thank you! Wishing continued success to your channel . Just to update you, I connected the USB and SATA cables; it seems the ARGB header isn't required. From my understanding, the ARGB header is mainly for synchronization and is optional.
Additionally, I've observed that my boot-up time is prolonged; I'm uncertain if you're experiencing the same issue.@@TheProvokedPrawn
Can I use these with a 7800 xt? Which strimer cables would I buy? Any help would be appreciated 🙃
What if the 5Volt 3 pin is already being used? (Motherboard only haves one)
I have a 4090 with 4conectors going out of the psu and from corsair 4 to 1 that goes into my gpu so i just have to unplug it and put the lianli strimer in between?
I have the same situation. I think the only thing we need to do is unplug the conector that goes directly to the GPU and only conect the strimer to it, and then plug the strimer to the GPU.
Is it safe to use the Asus plug from the 4090 to plug into the Strimer? So 3 connectors into asus plug into strimer or is that too much daisy chaining?
Prawn thank you for your amazing content. Truly love the information you give out and the help. Wanted to ask you what you recommend I have a GEN5 motherboard and everything else but I have a EVGA 3080 CX3 black 3080 and I wanted to connect strimer which ones would you recommend for me to install? Thank you in advance.
So if i already have a Lian Li Galahad II LCD, I cant just use just the controller that came with it by plugging the strimer cable in to it??
With the sync port adapter potentially
Nice guide, very helpful! My main complaint is that Lian Li hasn't made a universal hub for all their products. The software imo is good and works well with the three varieties of products I'm using. It just stinks to have to shove 3 hubs into the back of a smaller case in order to use strimmer, tl lcd fans and sl infinity fans.
Yeah that's a fair criticism
Wait 600 w is that for each like both cables 600w so you’ll need a 1200w for a gaming pc cuz the cables are 600w
no that’s not how it works (I think)
I ended up creating a pretty cool way to use a 2x8 on top of a 12VHPWR Adapter from Cable MODS using translucent rubber bands that you can only see up close with the PC off.
It worked magically
this looks to be the deformed chimera of argb adaptors, or fat guy in a little coat likem tommy boy said
Thanks for this tutorial!! Love how clear it is and how we can ACTUALLY see very clearly what goes into what. This presentation is solid!!
@@whitelotus3096 thank you. I aim to please
Noob question, i have a cable mod psu cable that connects to the gpu will it work with the 1st lian cable that you showed?
thankyou so much for making this video, now im confident that they are all basicly an "extender"
Hi should the usb header and sata connected for it to work? I got the strimmer 16 pin and the 12vpwr, my problem is my board only has 2 usb 2.0 header, i thought plugging the sata would work
Try this ruclips.net/video/d8vELbWWaCQ/видео.html (yes you'll need sata power as well)
@@TheProvokedPrawn thank you
Provoked Prawn just one word about your video contents... AMAZING! Thank You!
Thanks Daniele. Appreciate it 🦐
Hey, sooo I have a 2x8 pin Stimmer cable, am I able to use that to connect it to the adapter that comes with the card? Thanks
Currently putting together a build and I switched from a SFF idea to a full blown RGB puke build. I've watched several videos surrounding Lian Li fans and these on your channel.
Your explanations and visual representations on everything have been astronomical in regards to putting me in the right direction.
I cannot thank you enough. Also, soothing voice.
Thanks Zac. Glad you like the videos. Assume you are subscribed 👍🏼
can we combine 2 usb 2.0 headers into one for motherboards that just have 2 usb 2.0 headers?i have strimer plus controller and uni fan controller and ryuijin ii but my mb has 2 usb headers.
ruclips.net/video/d8vELbWWaCQ/видео.html
I am not sure what to go with I dont really know what PCie gen my Rm1000x is but I am running it w a 4090 which strimer plus v2 cables would I get? Also you mentioned needing to buy the old 24pin strimer to get ur control box correct?
How does 3x8 worke? Thats only 450W, not 600W.
can they be used on a amd gpu if its also dual 8 pin/ triple 8 pin
Can I use the 3x8 vhpwr cable for my 4070?
Nice vids. Will this work if i will connect it to corsair internal 4 port usb2.0 hub? Will the L connect app work also?
Question: I see the old school one has 3 8pin connectors, but my SUPRIM has 4. Will this still work ? I don’t see they made ken with 4 pcie connectors
Hey thanks! I've just done my first rgb build and your videos helped me a lot! A far cry from my previous build where i just plopped the 3 fans that came with my case right into the mobo lol!
Thanks Hannah. Glad to help. Hope that means you're subscribed too. Enjoy the PC 👍🏼
Correct me if I'm wrong, but this *doesn't* need to be plugged in to an ARBG header assuming you use the USB header instead?
Correct
@@TheProvokedPrawn sweet, thanks for the reply!
So, the cable you order depends on the type of Power Supply that you have? So should I just buy a Power Supply with the 12VHPWR output to make my like easier since I'm currently building a PC?
that is the easiest option yes
which do i need to buy i want one for my motherboard and for my rtx 4080?
can you sync those strips to the icue software?
No
So this will work on a 4090 and a Corsair gold standard 1000e psu?
Super pass for me. Just because the cable is white and not black
I'll be honest.. It doesn't look as nice as I thought it would. Maybe because it's curved? Probably looks better in some chassis.
Yeah I'm going to bosh together another view with it coming from below in a different build soon.
Eh. I prefer it be the same size as the connector in width.
how wide is it? I would like to put it in an itx build, 12vhpwr 8 led strip
Does anyone know if the strimer plus v2 24-pin works on an AM5 motherboard?
There's no logical reason it wouldn't
Hi will there be any interference with glass panel? I am using h9 elite and fe 4090 horizontally mounted
Also i have uni hub fan controller will it work with it?
could i use the nvidia adapter to connect it to the strimmer?
The Strimer would replace that adapter, just get 3x 8pin to 12VHPWR Strimer.
Thing is here in my country that x3 8 to 12 strimer isn’t available yet. Only the 12v to 12v. You reckon its safe to daisy chain the nvidia adapter to strimer?
Hey! Great video! I currently ordered the strimer with the 3x6 to the 12 for my 4070 ti. I was wondering if you knew whether or not I would connect all three of the 3x6 or just two because the 4070 only uses 2 of those!
@spencersundeenvolleyball7977 have you figured it out? I have a 4070ti that uses the 2 8 pins and am deciding which one to get
do u hace any answers guys? i have a lian li strimer 3x8 pin to +12vhpower to my rtx 4070 super. But my psu have only 2 cables 6+2 to PCIE. it is safe to connect the lian li cable to 2 ports of 8 pin plus the pig tail of one of those? o it have must be with 3 x 8 pin independently? pls answer
@@matycodoceovalenzuela6079 you can pig tail one 8 pin and the use the other 8 pin for 3rd
Salut est ce que je peut utiliser 2*8 a la place de 3*8 car jai une 4070 merci