I was so hype about this video so I went and did it. (I was spending a lot of time working on them) My stepmom came home and told me it was stupid. Then they wonder why I don’t like leaving my room
Thats pretty trash of her keep doing it if you enjoy it ignore her its actually really fun making them but dont be like me and get addicted to making them im making to many 😝
Nobody should ever be allowed to tell someone else that something they are doing is stupid. Shame on her. Good vibes only. Do what you love. Dont listen to anybody.
Go to the closest thing you have to a store with a craft section when/if possible. :| I don’t know what they have where you live but that’s my best advice.
Sweet Cheesecake it’s not that easy. I have a target by me that has mod lodge and hot glue but I need to take a bus there and I don’t have the time or money for that.
using clear nail polish on hot glue makes it completely clear, so for the earrings encased in hot glue, just use clear nail polish (or glittery clear nail polish) on both sides and it creates a nice, almost clear resin like effect (but if there are bubbles it will show)
booperdooper2.0k I tried to make a waterfall for some reason, I used a whole pack for it and ended up throwing away the project because it looked horrible 😔
Here is a tip for anyone without safety pins, if you already have a back (the bit you put on a pin so it doesn’t stab you) you can use drawing pins. I did and it worked fine.
BEST TUTORIAL I'VE EVER WATCHED!! I made so many pins and they all look amazing!! (tip! if you want your pins to look shiny but you don't have modge podge or glue, just put on tape before you take it off the parchment paper, then cut it out ((i used the hot glue technique))
Now I can finally have lgbtq+ pins for my lanyard for school!!! (I’m pansexual btw uwu) update: i never ended up making them, and i’m assuming i commented this in 2019. actively a sophomore in highschool, 15, i’m non binary and use they/them pronouns, and i’m omnisexual
hey guys if you don’t have safety pins, you can try using old stud earrings, or random things around your house or junk drawers that you aren’t going to use! honestly you can recycle just about anything that has something similar to a safety pin/ and or stud earrings! plus it’s always fun to try and get creative with things you might have around the house anyway! :)
You can seal you stuff with Mod Podge Dimensional Magic or Glossy Accents to make a hard glossy 3D coat! So much better than hot glue. If done right, it looks like resin though not as tough! However, I only use this method if I’m doing crafts with friends since it is nontoxic and easier to work with. It’s a better alternative to resin especially if you’re a minor or are doing crafts with minors, are hesitant to work with harsher chemicals, or are in a confined space like a bedroom. Resin is actually cheaper in the long run, though you will need some gear and leveling prep as well as safety precautions as that stuff can ruin your eyes and skin badly. I was comfortable working with resin since I regularly work in a chem lab, I know my lab safety and had my gear at home. I used my dad’s workshop tools for assistance.
I tried this i drew them and they turned out great i found the glue gun bit over it for protection not so great but the mod podge was perfect this is the best idea ive found i also found you can use blank stud earrings instead of safety pins
Tysm edit: i tried it out and it turned out very amazing you can also use clear glue or white glue if you dont have mod podge it works the same i tried it with with glue since i dont have mod podge
I have seen some videos where they make it from plastic. I wanted to make it but i can't found #6 plastic😔..... but now i found your video and this is so much easier and safer. Thank you!🤩
Definitely using this for when i go public fursuiting! I saw consent badges (for hugs or boops etc) and i really wanna get one but i cant so i decided to make one just cause i love hugs from people and want people to know that its ok to do so, its also good for making basic cute pins!
Tysm!! I needed this so much because anytime I tried to find anime pins the prices would be 20-100. But but I get it, people spend a lot of time on these put I just won't be paying that much. But thanks :)
WARNING!! NOVEL ALERT!! I love this video the ways to make the pins really helped me!! I have a suggestion though, if you didnt have mod podge and only had hot glue heres something you can do!! First when you press down the hot glue on the back of the pin you can let that dry and then melted a sheet of plastic onto the remaining hot glue around the pin and cut off the excess. Anyways thanks for reading this hope it helped!!
Finally something to do with the hot glue that oozes out of my gun when I'm not using it. I always feel a little guilty when I put my glue gun down in the middle of a project and when I turn back to it a few mins later there's a pile of glue.
Probably wouldn't. The erasable marker she used disappeared because those use friction (I.e. heat) to disappear, and the hot glue was enough to basically do the same thing.
So to avoid all the intricate cuts you can use a brother scan 'n cut DX model 125 or better. They have a built-in 600DPI scanner, rotary auto adjust blades for cutting light fabrics and other materials up to 3mm thick, you can create right on the Scan 'N cut without using a computer with it or you can use a computer to design and edit, use it to scan your shapes and cut them automatically. You might also want to use the laminate cartridges for Xyron's cold press Creative Stations (9 inches/900 series) to seal the pieces.
Ngl that comment is hilarious to me- The person over here is doing the cheapest looking pins in existence and you're here like "brother scan n cut dx model 125 with built in 600dpi scanner-" I'm dying of laughter! Or maybe I'm just sleep deprived... perhaps both?
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
"if you don't have it just buy it"
2020: ...we can't
😞
I'm sorry but which seungmin as I'm stray kids seungmin
If yes then nice to meet you In a stay to
Thanks again 2020
Eggsactli why we are here 😂
XD lol
I was so hype about this video so I went and did it. (I was spending a lot of time working on them) My stepmom came home and told me it was stupid. Then they wonder why I don’t like leaving my room
Michelle Glenn
Aw man, it’s so rude from their side
No it's not >:( Continue doing what you love! (From a pin lover)
Thats pretty trash of her keep doing it if you enjoy it ignore her its actually really fun making them but dont be like me and get addicted to making them im making to many 😝
Nobody should ever be allowed to tell someone else that something they are doing is stupid. Shame on her. Good vibes only. Do what you love. Dont listen to anybody.
I don't wanna sound fake but I can relate I never come out of my room because every thing I do she has to say something about it
What if I don’t have safety pins.....
* *crys* *
Kawaii Stars BUY THEM
Buy them you can't make pins without them
Kawaii Stars it’s Cries not crys
Wow everyone’s so mean, I don’t have it either :(
I guess you have... danger pins - ok im sorry ill leave
Her : "don't use wax paper"
Me : *uses wax paper*
How’d it go? 😂
no one BUt wHy I onLy HaVE THat OnE
r/madlads
Adriel Guanzon I was gonna comment that lmao
Did it work XD
hey guys if you don’t have safety pins use an old earring or thumb tack and hot glue it to the back it works that’s what i did YOUR WELCOME!
viktoriah mutuale Thanks a lot!
Thx
Thanks
Oh thanks I have some flat earrings I don't want anymore
but wont the thumb tack just fall off or stab you???
i tried this with printing out pictures instead and it worked just as well
thanks so much for sharing this video with us
Thanks I was going to ask that 😂
Princess Peppa LMAO why do you care about what they searched
ɪɪɪᴊɪᴍɪɴᴇᴅ Hᴇᴀʀᴛᴜ because they probably wanna search it up too since it worked out well for them :)
Dayanna Sanchez okay I was just saying lol
The erasable marker disappeared because it contains chemicals that react with heat.
That's why it's erasable in the first place.
lol
Nuh uh
*I came here to make anime pins.*
Rainni_Artx LMFAOOOO I came here to make pride pins
Omg same tho
I’m making them for my anime obsessed friend, not just the anime obsessed me.😜
CAME HERE FOR THE SAME REASOON
MIRACULOUS
"Go to walmart"
Phillippines: whats that?
Me: ;-;
same but I live in Egypt ;-;
Same but i live in Greece;-;
:
I live in New York and there's no Walmart
Go to the closest thing you have to a store with a craft section when/if possible. :| I don’t know what they have where you live but that’s my best advice.
This deserves way more recognition. Definitely will be trying 😊
ok what if I say that I don’t have hot glue or mod podge...
Then buy some
Sweet Cheesecake it’s not that easy. I have a target by me that has mod lodge and hot glue but I need to take a bus there and I don’t have the time or money for that.
Sweet Cheesecake What if you don’t got money
Any glue will work.. Where u live? They must b having local white glue type thing... If not try any glue available. U can try sticky tapes...
@@mariasanchez6040 then go to the nearest store that sells gift cards like for amazon and go to amazon and order hot glue or mod podge
using clear nail polish on hot glue makes it completely clear, so for the earrings encased in hot glue, just use clear nail polish (or glittery clear nail polish) on both sides and it creates a nice, almost clear resin like effect (but if there are bubbles it will show)
This was super helpful, i made the second hot glue one and i managed to make 8 pins and pin them onto my school bag.
aye yo hitmanbang introduces the second audition : )
@@minyoona1901 🤣🤣
I edited the comment so no one knows how I got this many likes?
Good joke. I really live in Poland. What should I do?
Dzień Dobry Słoneczko! Swim to America how else?
Excuse me we all in quarantine
I live in Philippines so :(
Ahh yes Satan's petting zoo
Am I the only one who found it satisfying when she cut off the excess got glue??😁
Thanks for the 💓
*uses hot glue on something stupid*
Dad: we'll buy some *later*
*sees video*
Me: ....nOoOoOoOo!!
Wait are you Stay?
Wait are you STAY?
yousra amokrane yessir
booperdooper2.0k I tried to make a waterfall for some reason, I used a whole pack for it and ended up throwing away the project because it looked horrible 😔
@@kaerenmi2143 I felt that sis😔
This was so helpful!!! I made 6 pins out of it and they all turned out great! Thanks for an excellent tutorial!
This is the best and easiest way to do pins I tried the second way and received dozens of compliments
“No plastic” uses hot glue 😂
This method actually works really well though!
Mishumydog Ikr!
Mishumydog I think she just means no hard plastic but yeah 😂
She meant like shrink plastic...
LunaticGirl666 yeah! That’s what I meant but I couldn’t think of the word! 😂 thanks
@@anniehowell211 Ahhaha all good
Here is a tip for anyone without safety pins, if you already have a back (the bit you put on a pin so it doesn’t stab you) you can use drawing pins. I did and it worked fine.
BEST TUTORIAL I'VE EVER WATCHED!! I made so many pins and they all look amazing!! (tip! if you want your pins to look shiny but you don't have modge podge or glue, just put on tape before you take it off the parchment paper, then cut it out ((i used the hot glue technique))
my friend and i are starting a pin company, we tried the plastic method and it didnt work, gonna try this method so thank you so much!
that’s it called?
I’m to poor so I’m here
Same lol.
This was so easy and cheap! It's a really cool DIY we can all do. Thanks so much for sharing this video with us!
Great tutorial
I have been looking for so many technics
And these worked best
“Stop trying time make Fetch happen Gretchen, it’s not going to happen!”
Andrew Cannon I’m going to put that on a pin 😂 😂
Only Equines! Lol I need to see that
"AND NONE FOR GRENCHEN WENNERS BYE~" omg yassssssssssssssssssssssssss
Alina Deng I like your name!
@@bonanaalina4513 Thanks!
fetch
AND NONE FOR GRETCHEN WEINERS BYE. oml i love ur channel evenmore noe XD
4 FOR GLEN COCO YOU GO GLEN COCO
GLEN COCO
GLEN COCO
GLEN COCO
Fetch
Martha the gleek stop trying to make *fetch* happen *it’s not going to happen*
@@marthathegleek3029
Gretchen, what’s fetch?
Oh, it’s like slang- from England.
Thank you so much ❤This really helped alot because where I live, it's not easy to find plastic that can shrink perfectly in an oven
Cheerful Blossoms have u tried shrinky dinks?
Now I can finally have lgbtq+ pins for my lanyard for school!!! (I’m pansexual btw uwu)
update: i never ended up making them, and i’m assuming i commented this in 2019. actively a sophomore in highschool, 15, i’m non binary and use they/them pronouns, and i’m omnisexual
I also cane here so I can make lqbtq+ pins, tho I'll be putting my pins on my bag
I saw some at hot topic
Marla I know they’re there. It’s just there isn’t one in my area
pansexual squad uwu
Hello fellow pansexual
hey guys if you don’t have safety pins, you can try using old stud earrings, or random things around your house or junk drawers that you aren’t going to use! honestly you can recycle just about anything that has something similar to a safety pin/ and or stud earrings! plus it’s always fun to try and get creative with things you might have around the house anyway! :)
You can use very fine sandpaper to smoothen the edges of the dried hot glue.
thank you random person from 6 years ago, you are my hero :salute:
You can seal you stuff with Mod Podge Dimensional Magic or Glossy Accents to make a hard glossy 3D coat! So much better than hot glue. If done right, it looks like resin though not as tough! However, I only use this method if I’m doing crafts with friends since it is nontoxic and easier to work with. It’s a better alternative to resin especially if you’re a minor or are doing crafts with minors, are hesitant to work with harsher chemicals, or are in a confined space like a bedroom.
Resin is actually cheaper in the long run, though you will need some gear and leveling prep as well as safety precautions as that stuff can ruin your eyes and skin badly. I was comfortable working with resin since I regularly work in a chem lab, I know my lab safety and had my gear at home. I used my dad’s workshop tools for assistance.
This definitely helped me! I was trying to find different ways to make pins for my friend.
I tried this i drew them and they turned out great i found the glue gun bit over it for protection not so great but the mod podge was perfect this is the best idea ive found i also found you can use blank stud earrings instead of safety pins
gonna try and make punk pins! thanks for this, man
Tysm
edit: i tried it out and it turned out very amazing
you can also use clear glue or white glue if you dont have mod podge it works the same
i tried it with with glue since i dont have mod podge
I have been looking for an easy way to make pins for a long time! Thank you
I have seen some videos where they make it from plastic. I wanted to make it but i can't found #6 plastic😔..... but now i found your video and this is so much easier and safer. Thank you!🤩
So freaking satisfying
Very cool to see the different ways you can make pins! 👍
U can always use old earrings 👐. I didn’t have parchment paper so I used wax then put vegetable oil on it, and it turned out fine 👍
Can I use clear tape and a glue stick instead of mod podge or tacky glue cause I don't have it?
You are really good at drawing!
Definitely using this for when i go public fursuiting! I saw consent badges (for hugs or boops etc) and i really wanna get one but i cant so i decided to make one just cause i love hugs from people and want people to know that its ok to do so, its also good for making basic cute pins!
Thanks for the ideas! I have a bunch of pin backings and I have no idea what to do with them
Thanks for the heart! I’ve made six and adore them thanks for the amazing ways to make them ❤️
For all my Criminal Minds fans out there who else thinks her voice sounds like Garcia’s ❤️❤️
Omg yess
It actually does wth
Shit. Your right.
True
Very interesting and simple way to make. Although there are many differences from our company's badges, badge crafts and equipment.
Thank you nowwww I can make anime (ahem mostly bnha) onessss UwU
Tysm!! I needed this so much because anytime I tried to find anime pins the prices would be 20-100. But but I get it, people spend a lot of time on these put I just won't be paying that much. But thanks :)
I did this and it was fantastic thank you ma'am 😀😀🙏🙏😍😍😘😘🇮🇳
Oml, I'm so happy rn, this is the most amazing thing ever tysm
you can also save your styrofoam takeout cups and boxes, and draw on them, then put them in the oven for 5 minutes! it works like shrinky dinks!
Is there a list of supplies that was used? Deaf here, couldn’t hear any of the instructions. TIA!
I love the ppl who just be there selves on RUclips
Great ideas, thanks for sharing.
thankyouu🥰💕 its not as pro's touch in it but we definitely can use our own designs without pulling a lot of budgets😊🙏🏻
me need!
The amount of Mean Girls references is amazing. . .
i planning to make an ita bag and oh my god this is gonna save me sooo much money. tysm!!
That 's a amazing way thanks for this amazing idea 😘😘😘
This is such a good idea!! I wish I thought about this sooner, now I can make more pins for my bag! 😄
WARNING!! NOVEL ALERT!! I love this video the ways to make the pins really helped me!! I have a suggestion though, if you didnt have mod podge and only had hot glue heres something you can do!! First when you press down the hot glue on the back of the pin you can let that dry and then melted a sheet of plastic onto the remaining hot glue around the pin and cut off the excess. Anyways thanks for reading this hope it helped!!
Finally something to do with the hot glue that oozes out of my gun when I'm not using it. I always feel a little guilty when I put my glue gun down in the middle of a project and when I turn back to it a few mins later there's a pile of glue.
When I saw the captain jack sparrow ones I immediately subbed and because I just saw this video so I subbed
You are amazing thanks for the diys
veryyyyyyyyyyyyy goooood. tanks.
This video is very helpful it was so easy to make my pins and they came out great!!
Thankyou sooooo much?!!!!
Love this video!!😍🥰🥰🥰
When you make the drawings, does copic markers work or will it come off as well?
I don't think they will, I haven't tried it but they *are* alcohol based so it probably won't.
Probably wouldn't. The erasable marker she used disappeared because those use friction (I.e. heat) to disappear, and the hot glue was enough to basically do the same thing.
I don't know I can try
Love it! Been lookong for an easy way to help make pins!
This video is really helpful I really want to make pins similarly. I like the ways you made them very cute. ❤
This is such a great video!! Hopefully I'll have time in the near future to make some of these. Thank you ♥️♥️♥️ just subscribed.
Is modge podge is same as any white adhesive like fevicol??
I put this video in my quarantined playlist for things to do... I’m doing a this cus it’s cool :D
These are so pretty and cute😍I love them
I used to do this now they have dimensional magic so that's really nice
Do they melt in hot weather? Have you tried making a mold or buying a circle one and putting uv resin on them
“The problem is not the problem the prob”em is your attitude about the problem”
Hm, I’ve never thought about it that way.
this is the only easier way I can make my own pins, thanks for this!
New here can use anything else other than parchment paper can u use foil??
It was very helpful !!
THANKS...
btw you can use clear nail polish to make it glossy instead of glue it works!
I think that's the easiest diy for pins that i found so far thank you maybe i will try it out :D
For outlining can you use a pen?
Very beautiful drawing
Thank you for an idea!! Gotta do pride pins💫💕
hey what parchment paper are u using?? i cant easily take it off when im puting the hot glue inside
Is there anything we can use or substitute to that parchment thingy?
thank you that so easy I going try it.
So to avoid all the intricate cuts you can use a brother scan 'n cut DX model 125 or better. They have a built-in 600DPI scanner, rotary auto adjust blades for cutting light fabrics and other materials up to 3mm thick, you can create right on the Scan 'N cut without using a computer with it or you can use a computer to design and edit, use it to scan your shapes and cut them automatically. You might also want to use the laminate cartridges for Xyron's cold press Creative Stations (9 inches/900 series) to seal the pieces.
Ngl that comment is hilarious to me-
The person over here is doing the cheapest looking pins in existence and you're here like "brother scan n cut dx model 125 with built in 600dpi scanner-"
I'm dying of laughter! Or maybe I'm just sleep deprived... perhaps both?
What if you just like taped the paper to a bottle cap or beer cap and hot glued a safety pin, would that work?
This is my new hobby :0
cool water bottle maby in the next vedio u should show us the stickers that u are using
Awesome! My best friend is obsessed with Stranger Things, so I wanna make her some Stranger Things pins. (I might make some for myself, too...)
This is the best video I've seen so far!
i live in the uk so can i use any type of crafts glue?
u can always try but i'm not 100%
Is it ok to use uv resin for coating? After attaching the image on hotglue?
This a really great video, thanks for the awesome ideas!
If your having trouble with the parchment paper sticking use cooking spray it works a lot better
Thanks for this 100% will be trying👍👍👍