Toyota Corolla 4 Channel Amp Install
HTML-код
- Опубликовано: 9 сен 2024
- Full install video here: • 2020 - 2024 + Toyota C...
Parts used linked in the description below!
Watch a full tutorial as a 2022 Toyota Corolla will have a 4 channel amplifier and DSP installed. We will be installing our amplifier under the driver side front seat and integrated to the factory audio sound system.
NOTE: Our corolla was not equipped with the upgraded JBL amplified audio system. IF you have JBL, you will need to bypass the JBL amp with the harness linked in the description below for your audio signal.
This video applies to Toyota Corolla models for years 2020, 2021, 2022, 2023, 2024 and newer. This video also includes kick panel removal, complete installation for the 4 channel amplifier, wiring, and testing!
Click here to see the amp and sub install. on this generation corolla:
• 2020 - 2023 + Toyota C...
Click here to see how to set your gains on an amplifier: • How To Set The Gains O...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used (Amazon Associate / eBay Partner Paid Links):
*Kicker Key 4 Channel DSP 47KEY200.4: amzn.to/45iC7Ka
-Recommended non-DSP 4 channel amplifier: amzn.to/4cgRCos
-Recommended 5 channel amplifier: amzn.to/3tjoj3a
*8 Gauge amplifier wiring kit: amzn.to/3iWX7jK
-Recommended 4 gauge wiring kit: amzn.to/31f0r2U
*9 Conductor Speaker Wire 20': amzn.to/3xK4PSk
*Redwolf Basic Audio T Harness (non-JBL): amzn.to/33reILj
-Optional Pac LPH-TY02 Full T Harness (non-JBL): amzn.to/4aVUZjC
**If your amplifier requires a line out converter, here is a recommended 4 channel LOC: amzn.to/3PWSje1
**If you want a fully assembled T harness with line out converter, click here:
www.provobeast...
*12"x16" ABS Plastic Sheet 1/8": amzn.to/34W9TtW
**IF you have JBL and are looking to bypass the OEM amp to add your own 4/5+ channel amplifier, here is what is needed:
*Pac AP4-TY13 JBL LOC Integration Kit
*(currently no JBL harness to bypass the OEM amplifier yet available)
Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases
Where are you located?
What Max volyme on headunit did u set? Did it distorsion? 45,46,47? Or Max
I have a 2022 Toyota Corolla SE and I used a SMD DD-1 and playing 1000hz at -10db it starting distorting at about 52. I don’t even listen to my speakers that loud either.
@@jjgonz98 ok. Did you have any bass rolloff? What volym did it start if?
@@fw1367 honestly I’m not too sure or how to tell with the SMD if there is a way. I did install a LC5i Pro into my system. I currently do not have a subwoofer (will be coming in the near future) only a 4-channel amp
@@jjgonz98 ok. My rear Chanel is so low volyme and allmost no bas frequense. So i Will clone front Chanel to a 4-ch amp.