Nice work there, interesting to see inside of it. I got one of those a month ago, dont know how to use it cant get nice finish with it, its the only parkside tool I dont like. And the noise of it, even with good hearing protection its way too loud. But its cheap, good enough for people that know how to use it.
Thank you very much sir, for me i like it too much for a long time i want buy some thing like it but the good brand is too expensive so i buy it in old market the tools and the used armature costed about 7$
I would like to know if the lates C3 version is as well made as A1. Parkside are usually well build in earlier versions and then they make it worse to save money.
Fascinating. For what the tool costs, it would undoubtedly be more commercially sound to buy a new one, and then toss the old one, or keep/sell it for spare parts. But where would be the fun in that :D
Good work Dahen Zana But how can you find Parkside tools in your country ? It's mostly (only) sold in LIDL in Europe You could have saved the armature but maybe not worth the time
thank you sir there is an old market in my country and almost are broken parkside yes but they are broken so it came from europe i try to learn fix armature
@@zana3587 Thanks for your reply. I have a Panasonic 18v saw that is not running properly..blade moves slowly and motor gets hot after running for 1 minute, brushes are fine and ive done the 3 checks on the armature and all seems ok. What do u think is the problem? I also connected battery direct and it runs the same
How are you, good man.are you ok? Yes we have it too, but it was used armature i buy it in old market. I am trying to learn to repair the armature but you know i cant go now to market to by wire
@@zana3587 the queue is to separate and have fewer people more space between people, and as all other food places, restaurant, McDonald's are closed, supermarket is all there is
Ordering replacement parts from the manufacturer is so expensive that most just toss out the tool. That's why its great to see people restore and repair with used parts from scrappers.
Hi! I bought the same product and I saw that there would be problems with the belt (overheating). I don't want to use it for industrial use, but that doesn't mean I won't use it at all. What do you think? Is it a good investment?
very good vork, all tho if I were to see such dirty machine from someone, I would advise them to just throw it away and go buy new one for the cheap money they sell for ;)
Хорошо сделал!! По этому Парксайду создаётся впечатление, что инструмент покупают на один раз-сделал работу и выбросил! Не наш метод...Инструмент должен работать!
Цена в Европе такая что не на один раз, а два инструмента на один раз. Это на пост советском пространстве, если купил инструмент то приходится пол года отрабатывать. К сожалению такова риалия жизни. Такой рубанок в Польше 15-20 долларов, в Украине уже 45-50. 🤔☝️
Genius, the commitment to its repair is outstanding ! Great video work, must have taken ages.congrats
thank you sir
Dobra robota! Super
Hvala vam gospodine
Very well done. This was a great restoration.
Thank you sir
أستاذي العزيز عمل رائع فنان
اشكرك استاذ
Как всегда на высоте!👍
Спасибо, сэр
Nice work there, interesting to see inside of it.
I got one of those a month ago, dont know how to use it cant get nice finish with it, its the only parkside tool I dont like. And the noise of it, even with good hearing protection its way too loud. But its cheap, good enough for people that know how to use it.
Thank you very much sir, for me i like it too much for a long time i want buy some thing like it but the good brand is too expensive so i buy it in old market the tools and the used armature costed about 7$
@@zana3587 The armature is 7 dollar. And how much is the broken planer? How much do you pay for the broken tools usually?
both of them are 7$
معلم 👍💯
اشكرك اخى العزيز
🇺🇦👍☝️файна праця👏👏👏👏👏
Дякую вам сер
very nice hob done my friend good work keep going
Thank you my friend
Seems surprisingly well-built considering the ridiculously low price.
yes sir
I would like to know if the lates C3 version is as well made as A1. Parkside are usually well build in earlier versions and then they make it worse to save money.
Very good job
Thank you sir
مشاء الله ربي يحفظك
Fascinating.
For what the tool costs, it would undoubtedly be more commercially sound to buy a new one, and then toss the old one, or keep/sell it for spare parts.
But where would be the fun in that :D
good job
thank you sir
Espetacular
obrigado senhor
nice vidéo plz can u explain more how to repair rotor
you mean armature ?
@@zana3587 yes armature Just so you know I would still watch the full video even if you didn’t speed it up I love watching you restore.
Good work Dahen Zana
But how can you find Parkside tools in your country ?
It's mostly (only) sold in LIDL in Europe
You could have saved the armature but maybe not worth the time
thank you sir
there is an old market in my country and almost are broken parkside
yes but they are broken so it came from europe
i try to learn fix armature
So did u repair the armature or fit a replacement to make this work?
i bought another armature in old market
@@zana3587 Thanks for your reply. I have a Panasonic 18v saw that is not running properly..blade moves slowly and motor gets hot after running for 1 minute, brushes are fine and ive done the 3 checks on the armature and all seems ok. What do u think is the problem? I also connected battery direct and it runs the same
good simple fix, armatures are never worth replacing here as they are usually 1/2 the price of a new tool
How are you, good man.are you ok? Yes we have it too, but it was used armature i buy it in old market. I am trying to learn to repair the armature but you know i cant go now to market to by wire
@@zana3587 yes i am ok, virus free and able to go to grocery store, which is a long queue to get in, but good supplies now.
I hope you ok all time, why long queue to get in! here there is no queue
@@zana3587 the queue is to separate and have fewer people more space between people, and as all other food places, restaurant, McDonald's are closed, supermarket is all there is
Ordering replacement parts from the manufacturer is so expensive that most just toss out the tool. That's why its great to see people restore and repair with used parts from scrappers.
Кстати, как по надёжности инструмент parkside? Какой жизненный период для дома например?
для дома хорошо
Спасибо большое!
Привет окк👍👍👍
Спасибо, сэр
Здравствуйте можно познакомиться
👍👍
thank you
@@zana3587 You're welcome. Take care.
Hi! I bought the same product and I saw that there would be problems with the belt (overheating). I don't want to use it for industrial use, but that doesn't mean I won't use it at all. What do you think? Is it a good investment?
Hi sir, it's just good for your home, light work
@@zana3587 thank you! 😃👍🏻👍🏻
👍👍👍👍👍👌👌👌👌👌
thank you sir
very good vork, all tho if I were to see such dirty machine from someone, I would advise them to just throw it away and go buy new one for the cheap money they sell for ;)
👍
thank you sir
Хорошо сделал!! По этому Парксайду создаётся впечатление, что инструмент покупают на один раз-сделал работу и выбросил! Не наш метод...Инструмент должен работать!
Спасибо, сэр
Цена в Европе такая что не на один раз, а два инструмента на один раз. Это на пост советском пространстве, если купил инструмент то приходится пол года отрабатывать. К сожалению такова риалия жизни. Такой рубанок в Польше 15-20 долларов, в Украине уже 45-50.
🤔☝️
فيديو رائع ممكن اخي كيفية تصليح محور الدوران بطريقة دقيقة
شكرا اخى انا اعمل عليه
Ok
Thank you
ما رقم الحزام المطاطي للجهاز
لا اعرف، اسف
Thanks for sharing ..
i am looking to buy a planer belt for parkside PEH 30 C3. can help me anyone where can order this belt
for me no idea
@@zana3587 thank
👍👍👍👍👍👍👍👍👏👏👏👏👏👏👏👏🌺🌺🌺🌺🌺🌺🌺🌺
Thank you
how much do you pay for a broken tool?
1$ to 5$
@@zana3587 wow, very cheap, thank you for answering me, where is this place? Germany, city? How can I find that place.
Kurdistan
Good work but this junk is not worth repairing
thank you sir
Хуйня не робота
ok