How to diagnose and replace a VW / Audi 2.0T, 1.8T PCV valve

Поделиться
HTML-код
  • Опубликовано: 12 сен 2024
  • #shorts
    You can find our upgraded PCV valve here: www.rkxtech.co...
    Albright we trying to participate in 2022 with our first short! We will be trying to make more as time goes on. Let us know what you would like to see for future videos.
    Testing for a ruptured PCV valve is simple! If you feel vacuum coming out of the top vent hole on the PCV valve cap your PCV valve has an issue. This vent hole is simply a breather to let the PCV valve move up and down freely. You will never feel / hear vacuum from it when it is working properly.
    #vw #vwgolf7 #volkswagen #audi

Комментарии • 48

  • @Retodd._.
    @Retodd._. 8 месяцев назад +17

    So basically what he’s checking for with his fingers is suction. You should see a hole at the end of that lifted line in that part and if you put your finger there you shouldn’t feel any suction, if you do there’s a leak. There may be other causes for it but I am just going to try to replace the cap as well you may have to replace the entire Pcv valve or it may be something else

    • @daniels.8490
      @daniels.8490 7 месяцев назад +1

      what if its blowing air and not sucking?

    • @Retodd._.
      @Retodd._. 7 месяцев назад +1

      No idea, sorry. Not a mechanic just trying to learn with these videos and it took me a lil to figure out what exactly he was showing in the vid so wanted to make easier for others

    • @abdul-kabiralegbe5660
      @abdul-kabiralegbe5660 29 дней назад

      ​@@Retodd._. Thanks for the explanation. 👏🏻👍

  • @mrw1160
    @mrw1160 Год назад +2

    Worked great

  • @mvicente.
    @mvicente. Год назад +1

    Vou dar uma dica aqui. É difícil pra desmontar, e pra montar é bom usar um martelo pra fazer o encaixe. No motor 1.8T 2014 da Audi, o respiro fica virado pra direita assim como no vídeo. Espero ter ajudado!!

  • @pablocelerinozavaletagarci3400
    @pablocelerinozavaletagarci3400 Год назад +1

    Great video, thanks for sharing your knowledge.! 👍👍👍👍👍

  • @allenstevenson5986
    @allenstevenson5986 Год назад +3

    Is it normal for oil to accommodate on the dump tube/house at the back? Is that a symptom of bad PCV?

    • @RKXTECHcom
      @RKXTECHcom  Год назад +2

      Totally normal. I would not be concerned unless you are consuming abnormal amounts of oil then it would be worth investigating further.

    • @pablocelerinozavaletagarci3400
      @pablocelerinozavaletagarci3400 Год назад

      Muy bueno el video, gracias por compartir tu conocimiento! 👍👍👍

    • @FayazShaikh
      @FayazShaikh 5 месяцев назад

      Same issue am facing....oil accomodation at hose which connects pcv and to the turbo....engine is consuming oil.........what solution did u find? Plz do reply

  • @dadofalltrades5225
    @dadofalltrades5225 2 месяца назад

    What if you replace the entire PCV valve, not just the diaphragm and there is still suction there?

  • @jvieira_cupra
    @jvieira_cupra 5 дней назад

    Can pcv damage my sparklugs? My sparklugs only last 5000km... Than start misfiring and system too rich error code...

  • @eoghanhennessy443
    @eoghanhennessy443 2 месяца назад +1

    I replace the piece you did .didnt fix it i needed complete valve

  • @riceinice
    @riceinice 28 дней назад

    My mk7 has rough idles and slight misfires on cold start, I noticed a blue puff of cloud coming out of my engine on cold starts now. Would this fix the issue of replacing the pcv valve?

    • @ZohirZohhiro
      @ZohirZohhiro 13 дней назад

      The same thing happens to me. Did I find a bug?

    • @riceinice
      @riceinice 13 дней назад +1

      @@ZohirZohhiro yeah i replaced the pcv valve and it worked all the symptoms stopped

    • @ZohirZohhiro
      @ZohirZohhiro 13 дней назад

      @@riceinice Thank you, my friend. I will replace it and see the result

  • @runexscapexBotz
    @runexscapexBotz 2 месяца назад

    REPLACE IT COMPLETELY
    There’s more than that 1 rubber seal in it!

  • @Ponskippa
    @Ponskippa 3 месяца назад

    Do you lose about a qt of oil a month of this part is bad?

  • @louisbarkley5326
    @louisbarkley5326 3 месяца назад

    So I have a 2.0L non turbo and I have an oil leak from throttle body dealer said it was because pcv failure is this the same procedure for N/A

  • @jeffreyswarts1524
    @jeffreyswarts1524 11 месяцев назад

    My Golf 6 Gti. Throw out rich code P0172. Did feel air escaping from my PCV. Can this be the culprit? I understand that a good PCV should not have any air escaping

  • @onurgns
    @onurgns Год назад +1

    I wonder what’s in under yellow lids

  • @thomasr7429
    @thomasr7429 Год назад

    Thanks!

  • @melodymilicent9308
    @melodymilicent9308 2 месяца назад

    Are u using old or new spring changed my occ cleared codes and still reading pcv and map not changed...

    • @RKXTECHcom
      @RKXTECHcom  Месяц назад

      We always recommend to reuse your original spring. There are several version of this PCV assembly and many have different spring rates. The spring regulates the PCV flow so its always recommend to reuse your old one as the one included may or may not be correct depending on what assembly its going in.

  • @brandypresley1869
    @brandypresley1869 11 месяцев назад

    So were u getting air or no air when u touched the hole on top

    • @tornadotayte
      @tornadotayte 5 месяцев назад +1

      It was sucking air in (before fixed)

  • @azamcoolem5729
    @azamcoolem5729 5 месяцев назад

    is it feel suction or how

  • @yung6moke870
    @yung6moke870 Год назад +4

    it sounds the same tho. i have a 2010 passat and i got a new turbo, new pcv, put new injectors in, new sparks and coils and it still runs rough as shit. prob just need too rebuild the head and clean the lifters.

    • @ajt5662
      @ajt5662 Год назад

      Check the gapping on the spark plugs and consider the throttle body battery or alternator. Also possibly o2 sensors.

    • @theodorosgeorgalis8027
      @theodorosgeorgalis8027 Год назад +1

      Did you clean the intake manifold?

    • @GavinHudman48
      @GavinHudman48 Год назад

      100% probably carbon build up on his intake valves.@@theodorosgeorgalis8027

    • @brandypresley1869
      @brandypresley1869 11 месяцев назад

      I lmao on ur comment😂😂😂😂 im having a hell of a time with my 2012 2.0 turbo smoke up the whole damn neighborhood 😂

    • @AyySway
      @AyySway 11 месяцев назад

      im having smoking issues too any fix?
      @@brandypresley1869

  • @felixtovar4609
    @felixtovar4609 11 месяцев назад +4

    So how do you diagnose it?

    • @peterdavis8471
      @peterdavis8471 10 месяцев назад +3

      I guess they're not having air leaks after the repair

  • @Gboogie22
    @Gboogie22 10 месяцев назад

    Mines does that but the diaphragm isn’t torn.

  • @yoyolife4522
    @yoyolife4522 Месяц назад

    How i search for dat kit on internet?! Please🙏🏻

    • @RKXTECHcom
      @RKXTECHcom  Месяц назад

      www.rkxtech.com/collections/pcv-valves

  • @theGinthebuilding
    @theGinthebuilding Год назад +3

    This is misleading.. they fail in other ways even worse than this causing possible rear main seal failure

    • @fl5099
      @fl5099 9 месяцев назад

      Can you elaborate how ? 2021 MQB owner here wanting to learn more

  • @dylanhubbard4599
    @dylanhubbard4599 Год назад +2

    how much was that part? vw tryna charge me 200ish

    • @HeyaHoyah
      @HeyaHoyah Год назад

      I found an aftermarket on Amazon for about 30 bucks

  • @muhammadnizam848
    @muhammadnizam848 Год назад

    Where can i buy sir?

    • @RKXTECHcom
      @RKXTECHcom  Год назад +1

      www.rkxtech.com/collections/pcv-valves

  • @20vTurbae
    @20vTurbae 8 месяцев назад

    This isnae a 1.8T😂