Freak'n love these "2 year later" format reviews. The most significant reviews on youtube. Thanks Clint! We're about 2 months into using our M18 Table Saw, and love it so far. Sarah and I both became way more confident using it after we built it into a large workbench. I'm not keen on using a table saw on a flimsy stand.
Love the video! I’ve had mine about a year now and is working like it should. I have 2 12 amp batteries. I had to make a lot of adjustments to get it to cut right but once I did it cuts perfect like my sawstop after a lot a lot of adjustments. Good job Milwaukee!!
I bought mine online on a pre-order deal that included the stand for free. I love the saw. This is the 5th job site table saw I've owned and this cordless saw is the most powerful I've ever owned! It's also extremely well designed in every aspect. I love the blade brake. It allows one to quickly change the set up for the next cut. That's very convenient, and the safety that it provides is great. My only issues are minor. The measure scale for the fence started peeling of soon after I got mine. I glued it back down but it is not dead on accurate. It's shy of being perfect by about 1/16th of an inch. But that's fine I can live with that. The other issue is really inconsequential. The latch on the stand broke off. No bid deal. Now if I need to reposition the saw I do it by removing the saw then moving the stand. I'm very happy with the saw and I'd but it again in a heart beat.
Love these 1+ year reviews. Initial reviews are good, but seeing them hold up is what sells the tool. 👍 And my Dewalt table saw does the same thing with the gears. Hard to raise the blade.
I can't believe for a decade I used a corded yellow one.(shhh, don't tell anyone I ran yellow once) I'd like to agree on 2 years of use but you'd have to asked the guy who lifted mine at Home Depot out of my truck. 2nd one runs just as great as the first. A staple tool in my M18 collection. Great video.
Yep. My rubber foot is off also after the 1st 3 months. I use to run the Dewalt cordless saw. After replacing the fence twice. I donated it to my brother. Ive had the saw a year now. I do like it, though it seams the guide rail are getting harder to slide back and forth. You need to do a vid on any tools you regret buying or are not happy with after a bit of use. I have 1. That dam Milwaukee M12 jigsaw. If its not the shoe moving , that I continually tighten over and over, its the plastic insert falling out. I’ve tossed that bastard into the truck more than once. Grabbed the Bosch corded and got back into my happy place.
Since you mentioned battery capacity, I'd be curious to see a video showing what it can muster with a 5.0 battery on it. I could see a lot of people getting it cheaper as a bare tool for light/occasional use, if it can do a couple fives instead of the additional cost of 12's and high end charger.
This Milwaukee saw is on my wish list next l have a lot of Milwaukee tools + Milwaukee chop saw m18 fms 254 + packouts Outstanding they are tuft so thank you for your video it is great to see someone do a video sometime later well done sir they is only one thing us chaps in the uk 🇬🇧 get are packouts in black it is all good but I would like my set in red like you chaps in USA 🇺🇸 stay safe 👏👏👍
Got this saw a little bit ago on sale from the Guam homedepot sale. I love it. Portable and light. I need the stand though. I have a 12ah battery that came with the saw. It works great for my home projects. I do believe you have better dance moves than that pesky MDF gnome. Nice saw update 👍. Welcome to the new members 👏👏👏👏
If you decide to buy the stand. Buy a 6 pack cause you will need it. It took me a good 20 mins and a lot of cursing to figure out how to put it together. And it’s like 4 parts. Lol I almost put it back in the box and send it back. Trz make a video for these guys cause I couldn’t find one when I bought my stand.
I guess that's a good thing after 2 years still works perfectly fine just goes to show the quality that Milwaukee puts into their tools even the break for the saw blade still looks like it stops pretty quickly remember the old table saws after you got done cutting something sometimes you would grab a piece of wood to slow down the saw blade but tomorrow send you a picture on Instagram found it a brand new Homelite chainsaw 18in 44 CC gas someone must have used it once and they threw it away it started up after 2 pulls
Over all I love the table saw. It has done a lot of projects. I just wish the battery life could be better. I got about an hour of continuous use out of it and then it needs to be charge because it’s completely dead. You most definitely need to have an extra battery to use while the other one is charging. Other then that I’m pretty happy with the table saw.
I have a milwaukee m18 table saw. I was wondering if I can put it in 10 inch blade to replace my 8 1/4 blade? I'm sure lots of viewers would liked know if this can be done. Thanks for posting.
Hey! Nice video! I have the same saw my self. Is anyone having problem with “sawmarks” when you want to do some fine cutting? It’s like it wobbles a bit sideways. But just 0,5 mm or so. But then I half to sand it down to be smooth. Sorry for my English. I’m from Sweden. The country with all of the “fika”
Tool Review Zone I picked up the flexvolt tablesaw kit at Home Depot one day sale for $399 and it came with an extra 9ah A couple months ago and never took it out of its box. I have five tablesaws already.
@@ToolReviewZone There is a holder for the riving knife- no guard, but not one for the riving knife-with guard? I also see a mount for the anti-kickback pawls, but once they are installed on the RK-WG, I don't see a place to stash it when it is removed. Guessing (my conspiracy theory) that giving you a place to stash it would encourage people to remove it, leading to more injuries. I noticed in your video it is removed for most of the shots.
Tool Review Zone thanks for the reply man. Yeah I need 12.0 batteries and it’s cheaper for the kit so I might go that route. Just hurts to hit the buy button at full price lol
how fast does the supercharger charge the 12.0ah battery? your runtime is 45mins total of the blade cutting something or 45mins of your normal time working? i really wanna get this saw, i am not a pro, just a DIYer so I need to justify the runtime. lol
The hell? Ive been supporting you from the moment you got your membership unlocked. RUclips must be sending you some weird info. I even got 1 month support badge in lovely Makita teal.
I'm sure there is someone out there who has "life hacked" the battery...taken it apart setup a rectifier circuit and just soldered it to the battery outputs...and plugged it in...
ruclips.net/video/dR7OqGZYAQo/видео.html
Dan Da Man!!👊👊👊
Tool Review Zone trying to do my part bro 👊
Nice looking out Dan The Man
Freak'n love these "2 year later" format reviews. The most significant reviews on youtube. Thanks Clint! We're about 2 months into using our M18 Table Saw, and love it so far. Sarah and I both became way more confident using it after we built it into a large workbench. I'm not keen on using a table saw on a flimsy stand.
It's an amazing saw and love the workbench you featured on your channel! Tha ks for the awesome comment my friends 👊
Love the video!
I’ve had mine about a year now and is working like it should. I have 2 12 amp batteries.
I had to make a lot of adjustments to get it to cut right but once I did it cuts perfect like my sawstop after a lot a lot of adjustments.
Good job Milwaukee!!
I bought mine online on a pre-order deal that included the stand for free. I love the saw. This is the 5th job site table saw I've owned and this cordless saw is the most powerful I've ever owned! It's also extremely well designed in every aspect. I love the blade brake. It allows one to quickly change the set up for the next cut. That's very convenient, and the safety that it provides is great.
My only issues are minor. The measure scale for the fence started peeling of soon after I got mine. I glued it back down but it is not dead on accurate. It's shy of being perfect by about 1/16th of an inch. But that's fine I can live with that. The other issue is really inconsequential. The latch on the stand broke off. No bid deal. Now if I need to reposition the saw I do it by removing the saw then moving the stand.
I'm very happy with the saw and I'd but it again in a heart beat.
I agree. Wish they had the AC adapter and that they would have some better sales on these types of saws (Miter/Table saw)
Yeah, the batteries you can usually get some good deals on, but it looks as it they are.l now $449 at the Deeps. Everywhere else is over $500
Just got mine about 2 hours ago from the buy more save more event and wached both your vids. They helped a lot! Thanks!
Awesome Seas. I love this saw. So freaking smooth bro
Love these 1+ year reviews. Initial reviews are good, but seeing them hold up is what sells the tool. 👍
And my Dewalt table saw does the same thing with the gears. Hard to raise the blade.
Thanks for the awesome feedback and info E30. Truly appreciated brother 👊👊👊
Two years in my M18 table saw also, love your 2 year reviews your a BEAST just like MILWAUKEE'S M18 Fuel Table Saw ...
Haha thanks Fuel, your awesome 👊👊👊
I agree Clint wish they did sales on this table saw more @ToolReviewZone
I can't believe for a decade I used a corded yellow one.(shhh, don't tell anyone I ran yellow once) I'd like to agree on 2 years of use but you'd have to asked the guy who lifted mine at Home Depot out of my truck. 2nd one runs just as great as the first. A staple tool in my M18 collection. Great video.
Had mine for about a year now and still love it. All the guys on the jobsite are impressed by the performance ripping 2x4's and 2x8's
Awesome feedback, thanks Matthew!!!
Yep. My rubber foot is off also after the 1st 3 months. I use to run the Dewalt cordless saw. After replacing the fence twice. I donated it to my brother. Ive had the saw a year now. I do like it, though it seams the guide rail are getting harder to slide back and forth. You need to do a vid on any tools you regret buying or are not happy with after a bit of use. I have 1. That dam Milwaukee M12 jigsaw. If its not the shoe moving , that I continually tighten over and over, its the plastic insert falling out. I’ve tossed that bastard into the truck more than once. Grabbed the Bosch corded and got back into my happy place.
Thanks for the comment and feedback BZ1340!
Since you mentioned battery capacity, I'd be curious to see a video showing what it can muster with a 5.0 battery on it. I could see a lot of people getting it cheaper as a bare tool for light/occasional use, if it can do a couple fives instead of the additional cost of 12's and high end charger.
I have a newer corded job site table saw and am happy with it. But I’m glad I watched for your humor...funny stuff!
Haha, thanks Scott!!!
I've been using mine today a year later runs like a boss
Awesome, thanks for the feedback Philip!!!
This Milwaukee saw is on my wish list next l have a lot of Milwaukee tools + Milwaukee chop saw m18 fms 254 + packouts Outstanding they are tuft so thank you for your video it is great to see someone do a video sometime later well done sir they is only one thing us chaps in the uk 🇬🇧 get are packouts in black it is all good but I would like my set in red like you chaps in USA 🇺🇸 stay safe 👏👏👍
I have used this saw a few times a buddy of mine has one I agree very smooth @ToolReviewZone
Kinda also wish they had an ac dc adapter for this saw as well @ToolReviewZone
Just bought this thing. Still have cracked it open. So exited!
Great video, Clint. I’m sure Vince at VCG (who’s usually is a fan of the big red) would be totally green with envy.
Got this saw a little bit ago on sale from the Guam homedepot sale. I love it. Portable and light. I need the stand though. I have a 12ah battery that came with the saw. It works great for my home projects. I do believe you have better dance moves than that pesky MDF gnome. Nice saw update 👍. Welcome to the new members 👏👏👏👏
Hahaha, thank Gnome has nothing on my moves bro lol. Thanks for the feedback John!!!!!!!!
If you decide to buy the stand. Buy a 6 pack cause you will need it. It took me a good 20 mins and a lot of cursing to figure out how to put it together. And it’s like 4 parts. Lol I almost put it back in the box and send it back. Trz make a video for these guys cause I couldn’t find one when I bought my stand.
@@mattjervis3411 lol, your right. It's a pain and has to go together a certain way lol👊
I guess that's a good thing after 2 years still works perfectly fine just goes to show the quality that Milwaukee puts into their tools even the break for the saw blade still looks like it stops pretty quickly remember the old table saws after you got done cutting something sometimes you would grab a piece of wood to slow down the saw blade but tomorrow send you a picture on Instagram found it a brand new Homelite chainsaw 18in 44 CC gas someone must have used it once and they threw it away it started up after 2 pulls
Hahaha, three hours later the damn blade would still be spinning after shutting it off. Ahhh, the good old days
Yo TRZ! It's been two years?! Time fly's!
I know right brother 👊
🍻🍺
How would your rate this "old" sawe next to the new Ryobi HP table saw?... worth the extra dough for the old Fuel?
hi, can this saw take a dado stack?
Great video Clint nice and informative 👍 👌@ToolReviewZone
Thanks brother 👊👊👊
Sure would like to see a video of adjustments being made
great review buddy I smashed thumbs up I do have flex volt table saw love it but wish it was both cord and cordless
Thanks Michael!!!!! Love the feedback bro👊
Over all I love the table saw. It has done a lot of projects. I just wish the battery life could be better. I got about an hour of continuous use out of it and then it needs to be charge because it’s completely dead. You most definitely need to have an extra battery to use while the other one is charging. Other then that I’m pretty happy with the table saw.
It’s a fantastic saw 💯
Thanks for the comment Carpenter!!!!!
Great video, you’ve just convinced me to go get one thanks..
I have a milwaukee m18 table saw. I was wondering if I can put it in 10 inch blade to replace my 8 1/4 blade? I'm sure lots of viewers would liked know if this can be done. Thanks for posting.
Yo TRZ! Smooth vid playa!!!
Haha, SO SMOOOOTH!
I kid you not, I watched your original video last week and I wondered how it had fared.
Haha, that's awesome Christopher 👊 Hope this helped
@@ToolReviewZone It did. I'll get one soon.
Why not able to hook up AC power cord also?
Probably need to talk to Milwaukee about thatb🤷
Perhaps do a 2 year review on the 12ah battery. Considering the $ investment in this battery.
You got it Blake👊
They’re great batteries. Use them every day
You the best bro!
Right back at ya brother 👊
Hey! Nice video! I have the same saw my self. Is anyone having problem with “sawmarks” when you want to do some fine cutting? It’s like it wobbles a bit sideways. But just 0,5 mm or so. But then I half to sand it down to be smooth. Sorry for my English. I’m from Sweden. The country with all of the “fika”
Do you have the sexy flexvolt tablesaw? And what do you think?
I don't Renato... but I want it😫 Dewalt makes great saws, so I can't see it being bad
Tool Review Zone I picked up the flexvolt tablesaw kit at Home Depot one day sale for $399 and it came with an extra 9ah A couple months ago and never took it out of its box. I have five tablesaws already.
Where do you stash the riving knife/blade guard when not being used
there is a holder underneath
@@ToolReviewZone There is a holder for the riving knife- no guard, but not one for the riving knife-with guard? I also see a mount for the anti-kickback pawls, but once they are installed on the RK-WG, I don't see a place to stash it when it is removed. Guessing (my conspiracy theory) that giving you a place to stash it would encourage people to remove it, leading to more injuries. I noticed in your video it is removed for most of the shots.
No plug needed, if I wanted a plug I'd buy an electric saw . It's the beauty of it!! Plus the plug added option adds to much weight!!!!
What blade do you like on yours?
Diablo for sure
They should really add wheels to the saw stand! I like being able to roll the table saw as opposed to carrying it.
Does Milwaukee do any sales on the Miters or Table saws? I’m wondering if I should wait or not
Not to often, but Tge Home Depot has them for around $449 right now
Tool Review Zone thanks for the reply man. Yeah I need 12.0 batteries and it’s cheaper for the kit so I might go that route. Just hurts to hit the buy button at full price lol
Yeah I hear you. I always check to see what I can find deal wise, but never have much luck
how fast does the supercharger charge the 12.0ah battery? your runtime is 45mins total of the blade cutting something or 45mins of your normal time working? i really wanna get this saw, i am not a pro, just a DIYer so I need to justify the runtime. lol
That super charger is fast as hell. I have a dedicated video for it and will completely charge a 12.0 in 45 minutes
Micheal and matt welcome to the # TRZTRIBE!!!
The hell? Ive been supporting you from the moment you got your membership unlocked. RUclips must be sending you some weird info. I even got 1 month support badge in lovely Makita teal.
Lol, I was thinking the same damn thing, but it put you back on the top for some reason. I figured I'd give ya the shout out though my brother 👊👊👊👊
Is that the original blade? How long does a 12.0 last?
I've changed the blades 3 times, but they are actually pretty good blades broski
Can it dado?
What about the decibels
Smeeeeshed the like button!🤣
I wish the table was a bit wider
Ok i guess i'll take one
Smeesh that like button! 👀👉🏽 👍🏽
Thanks Jason!!!!!
Not being able to plug it in is a deal breaker. It's not like I've got a pile of 12 ah batteries laying around. Or, any of them. Theyre not cheap!
I'm sure there is someone out there who has "life hacked" the battery...taken it apart setup a rectifier circuit and just soldered it to the battery outputs...and plugged it in...
I am your new sub If you dont mind may i borrow this lovely stuff 😘
Haha👊
🍻🍺🍔
Yeah Milcrusty , how about some sales on some of the more $$$ tools. Help out us true blue red users.....but noooooo , bunch of greedy bastards.