The 366 was on par with the 044s in. That size wood....ported with a good tune and also with the bigbore option puts the 366 at 64cc which is ms400 territory...very impressive saw for the price.
You raise a good thought.. I have two fellas I trust like the 361BB... I haven't had the time to play with one yet... But that might be how I topple the 400....
@@bulletproofsaws.my ported BB 366 runs pretty sick... At least it seems that way as its literally still on its first tank.... Not even broken in amd leaned out fully..... The plus side to the big bore is lighter jug and Piston than the stock 59cc cylinder (so an even lighter saw even if slightly) and the Piston is lighter than the 400's magnesium slug... So needless to say.... It revs so quick.... As in comparable to the 400 throttle response...... I suspect it will topple the 400 easily. I really have to run mine more to break it in and do some timed cuts. Only issue I see may be premature wear on the bb Piston skirts as they are shorter than the 47mm Piston skirts so less support. But I run 32:1 in all my clones to have extra lubrication...... I really think these clones are great.... U just need to know what you are getting into.... Things like pistons may be a replacement part as the material is softer than oem so maybe every 2 years or a given period of runtime.... You change the Piston if wear or slap shows itself.... Anyhow I would love to see you keep going with the 366 comparisons and u should build a bigbore to run against the stock one and also port the bb and destroy some oem big names! Keep it coming! Enjoy the content
U should mod that 261 i think you will like it. Also u should run that ported 036 with the moded 366 or 361
The 366 was on par with the 044s in. That size wood....ported with a good tune and also with the bigbore option puts the 366 at 64cc which is ms400 territory...very impressive saw for the price.
You raise a good thought.. I have two fellas I trust like the 361BB... I haven't had the time to play with one yet... But that might be how I topple the 400....
@@bulletproofsaws.my ported BB 366 runs pretty sick... At least it seems that way as its literally still on its first tank.... Not even broken in amd leaned out fully..... The plus side to the big bore is lighter jug and Piston than the stock 59cc cylinder (so an even lighter saw even if slightly) and the Piston is lighter than the 400's magnesium slug... So needless to say.... It revs so quick.... As in comparable to the 400 throttle response...... I suspect it will topple the 400 easily. I really have to run mine more to break it in and do some timed cuts.
Only issue I see may be premature wear on the bb Piston skirts as they are shorter than the 47mm Piston skirts so less support. But I run 32:1 in all my clones to have extra lubrication...... I really think these clones are great.... U just need to know what you are getting into.... Things like pistons may be a replacement part as the material is softer than oem so maybe every 2 years or a given period of runtime.... You change the Piston if wear or slap shows itself.... Anyhow I would love to see you keep going with the 366 comparisons and u should build a bigbore to run against the stock one and also port the bb and destroy some oem big names! Keep it coming! Enjoy the content