Undervolt your M15 R4/M17 R4 with throttle stop to improve Temps and Performance!
HTML-код
- Опубликовано: 22 мар 2021
- In this Guide we explain how to use throttle stop to undervolt your CPU and create profiles to improve CPU performance and Temperatures on the new M15 R4. This will also be the same on the M17 R4 as it uses the same CPU's
Link to throttlestop:
www.techpowerup.com/download/...
Buy Alienware on Amazon:
M17 r4: geni.us/NFBEtFi
M15 R4: geni.us/kiS8Oin
* If you purchase something from our affiliate links we will get a small commission with no extra cost to you. This makes it possible for us to make more videos. Thank you! 
Наука
I can't believe it took me over a year to find this video. I've been using throttlestop for a while but could never find a decent guide to set it up right. This helped a lot! A thousand times, thank you
Great video. I’ve watched undercoating videos before but this was particularly helpful to see how you use the command center with throttle stop to view your fan settings, etc. can’t wait to try this tonight to see if I can improve mine. I was u able to adjust turbo ratio limits as the settings were greeted out. I will use your video as reference and try again tonight. Thank you!
Was able to undervolt my m17r4 with your wonderful video. Getting some great CPU temps now and better battery life. Thanks for making this video!
No problem, so pleased it has helped 👍
Just got my M17 R4 and this video has been IMMENSELY helpful. Thank you SO much! Temps are at low 80s and stable with a 100mV offset.
with temps under 80 are you gaming still maxed settings and are fans loud?
@@brysoncluff9887 I've since used my laptop in "clamshell" mode with an external monitor, and further dropped 10 degrees during gaming. Averaging 69-72 degrees now. Settings are maxed out for UQHD in order to hit 60 FPS. In Cyberpunk, that would be Ray Tracing - Medium. Fans are on performance or maximum. Not as loud as it is high pitched lol
@@adamzee4950 im in the 60's but my fans are loud but with my headset i cant hear the fan neither can my friends im gaming with, and i dont even use this setup the youtuber is using
@@shunsui5626 Meaning you aren't undervolted at all and running in the 60s during gaming?
@@adamzee4950 yes I’m on maiden warfare right now 62 •C
I love this channel. British accent and detailed tech stuff ❤️❤️❤️ this is proper nerd stuff mate. Keep it up
haha thank you, I sure will :)
This is a brilliant video, clear and concise explanation of throttle stops functions. You demonstrated all of the different performance modes as well which was really handy. Thank you for posting such an informative video!!
Thank you for the kind words :)
Great guide ... Can't wait to get my x17 and check this out again
x17 won't need this. it has better cooling.
Thank you so much for these performance / Undervolting videos. Really informative.
Glad they help :)
I just got my M15 r4 and will definitely will be following this guide. I put my r4 on full speed and I thought it was going to explode! It’s so loud! It also gets out air from the side vents like there’s no tomorrow. Still a Beautiful Machine though!
jajajaja I got mines recently and just setting up windows 11 it got hot and shutdown even when connected to the power adapter. Waiting on the new one but seen all this info I think I will buy a regular laptop. If your almost explodes gaming imagine mines just installing windows 11!!!
thanks im going to need this for a friend that is getting this computer, so he can be happy with the noise and get more battery time :3 , youre going to be a big tech youtuber soon, god bless you.
I just got my M17 in and working on it with your guidance.
Great! any question please ask
I love me those Alienware videos man keep them up👍🏻😍
Plenty more coming. You will get sick of seeing them pop up 😂
@@MashITTech I was wondering how long would an Alienware M15 r2 with 1660ti and 16gb of ram and core i7 intal 9th 9750H last
Do you mean battery life or system life?
@@MashITTech just overall with the specs and like gaming wise for how long will I be able to game like when new games come out will The hardware support it
6 cores is still the sweet spot for CPU IMHO and a 1660ti will be fine for a good couple of years at 1080p, you may just need to reduce some settings on AAA games to run well
Such a helpful video! Thank you so much!! 👍🏽
Very informative. Will be getting my M17 R4 in a few weeks. Can't wait to try this out. Thx
Let us know how you get on?
@@MashITTech Just received my M17R4 (18 days early). Already made some nice improvements with Throttlestop. Playing with Afterburner now. Loving it. Thanks for videos and reviews.
When you change clock speeds on all four "settings" you also need to change the undervolts on all four too.
Superb video. By far the best one out there on utilizing Throttle Stop on an Alienware M-series. I would also suggest undervolting your GPU with MSI Afterburner. I just spent half the day setting up the undervolts and repeatedly benchmarking, until I got it tuned just right, with a custom thermal profile/fan curve. I'd been utilizing this Alienware M17 R3 for about two years, without doing any of this. Considering Dell has recently replaced all components, including the chassis, I'd best make make the adjustments and get as much life as possible from the unit.
Excellent video. Superbly explained!
Used this video several times and it still works. Thank you man!
Thank you so much, my m17 was running at 100c playing war zone and now it runs at 80c, should last me a lot longer now lol
You are the man! A very well made, concise, interesting and extremely useful video! I've had my M17 R4 for a few days now and loving it. Will definitely apply an undervolt as per your guide. Looking forward to seeing your video on the GPU. Cheers.
Thank you for the kind words. GPU coming out later and I am doing a conclusion video to tie it all together Thursday. Been really enjoying these machines :)
@@MashITTech A quick question mate, what difference will switching between the Quiet and Balanced profiles on the undervolted CPU?
Ok, I will cover this in my final video tweaking the m15r4 but essentially:
Quiet mode locks your cpu at 45w
Balanced mode let’s the cpu max out up to 105w (less if you undervolted)
Once you apply the undervolt the quiet performance will still stick at 45w but you will get more performance for that 45w than stock.
The balanced will run as in my video so hopefully cpu maxed at 4ghz with less watts than stock (mine was 84 I think)
@@MashITTech after you’ve created your throttlestop profiles, do you create a custom fan profile on AWCC and then leave AWCC alone and just alternate between the throttlestop profiles? Or do you still switch profiles in AWCC?
Personally I leave command center alone in balanced and do all my CPU tweaking in throttlestop. As per the video I use different profiles for different things (by reducing the multipliers the temps and watts come right down making this thing so quiet in comparison with stock)
Excellent video. This information on Alienware laptops is pure gold and not available anywhere. Could you please do these kind of videos on other laptops as well. ASUS ROG Scar 17, Scar 15 , Strix versions etc. Almost every gaming laptop suffers from these heat issues and your channel is a god-send to amateurs like us to fix the thermals through your amazing videos. Thanks a lot mate :)
I sure will mate as I gradually get them in for review :)
Fantastic content well done mate! +liked and subbed
Thanks a lot mate :)
Awesome, it was really informative.
thank you
Got what I needed thank you
Great! Got one more tweak video coming where I put all the tweaks together, and look at command centre 👍
Excellent content as always.
Thanks so much 😊
Awesome info thank you
thanks for this. great info!
No problem, hope it helps 👍
most comprehensive explanation on Undervolting.
Really thorough reviews.
Thank you 👍
Your video rocked! I’ve been putting off undervolting my M17 R4 i7 3070 and your video was exactly what I needed. Thanks you!
Glad it helped! :)
How did u get it to work mate? I thought dell blocked it in a bios update?
@@nextgengaming7803 Really I followed the video exactly as he talked about and had no problems. I’ve even kept the bios up to date with Dell and haven’t noticed any changes. I’ll double check my bios settings and let you know if anything changed in a few hours.
@@nextgengaming7803 after checking bios I still have a TCC offset of 15 and throttlestop is still running great. Do you have a Ryzen laptop? I read that throttlestop and tcc are disabled if it’s running with a Ryzen.
@@DeadSpaceMartyr90 mine is the m15 r6, intel i7, I downloaded throttle stop again today, but it's still greyed out is the option to utilise the instructions this gentleman in video is giving out. It's very frustrating as I too have mine offset 15, so it maxes really at 84. But I'd love to tinker a bit more to lower it yet further with no penalty.
This is so helpful dude.
I have an alienware x15 and the temp of 100 degree is super concerning.
I am going to try this tonight and see.
If I keep it on performance and being down the core turbo boosts and wattage. I hope it will work completely well.
Thanks again for this dude
Glad to be able to help but Dell locked the undervaluing out on the x15 with one of their BIOS' so if throttlestop is greyed out you may need to roll back the BIOS
Thanks for the video. I have the alienware m15 R4 3080 with the Intel(R) Core(TM) i7-10870H CPU @ 2.20GHz on a 34inch 3440x1440 160hz ultrawide monitore. TCC SET AT 10. My stable undervolt on performance with all clocks stock is - 135.7 (both cache and core). Ran throttlestop on 960m size and received a score 67. Ran this for about 3 times. No errors. Ran it again at 7680m size. No errors. Ran time spy, with overclock on 3080 at 150 core clock, and 250 memory clock. received score of 11854 Ran cinebench (sorry i forgot the score)- no errors. I set my fan speed profile in AWCC customized to ramp up the fans 10 percent each 10th of 100c (80 percent speed at 80c). My max temps when not on high load is 85c. This is the best i can do on performance mode , playing on a 1440p monitor 160hz
hello mate, sounds like you have done a good job! Your scores seem solid considering the m15r4 has a slightly weaker cooling solution than the m17r4.
just got an m17 r4. This video ROCKS. THANK YOU. Also the out of the box temp differences between the m15 and m17 are surprisingly big!
Glad it helped! And yes the m17 runs so much cooler 👍
@@MashITTech so I think my undervolting isn’t actually taking.. have they locked it in more recent BIOSes?
What BIOS are you on? As far as I am aware they haven’t locked it yet!
@@MashITTech What's the easiest way to check on an AW?
I noticed that no matter what my voltage offset is, the Package power is somewhere around 61-70W. The multiplier lock works though.
Thank you for this.
No problem, hope it helps 👍
You’re the hero we deserve
Thank you, first time I have ever been called a hero 😂
Great content, subscribed
thank you 😊
I HAVE THE M17 R4, THIS IS USEFUL FOR ME THANKS
Glad it helps 😀👍
Wow! Massive improvement on my old M17 R3 after learning about bottlenecks with an amplifier enclosed 2080ti pushing the old i7 to 100% constantly. CPU dropped to 73C with your guide.
Thank you doesn’t express how utterly impressed I am but thank you anyway.
That's ok, I am just happy knowing it helps people :)
@@MashITTech So I repeated on wife’s M15 R4 and offset 160mV to drop 9C down to 71C max and 45W down to 30W
Clearly this is witchcraft!!! Nice one 👍
How did u get this to work? I thought dell blocked throttstop in a bios update?
@@nextgengaming7803 well my M17 R3 bios allowed both undervolt and overclocking which was because of the i7 6820 but my wife’s M15 R3 only allowed undervolting but o/c was locked out.
“My understanding” is that undervolting is permitted on all intel cpu Alienware notebooks, so I certainly recommend following this video to the letter. Ultimately can’t hurt to try?
@@nextgengaming7803 Confused .... 100% thought I answered this yesterday??
Anyway it's allowed overclock and undervolt on my M17R3 on a i7 6820 but only undervolt on my wife's M15R3
"My understanding" is that undervolting is allowed on all intel processors with throttlestop and overclock is entirely CPU dependant. Recommend you try it regardless because no harm can come from it if you follow this video to the letter.
Quick question how does the balance vs high performance on power effect the under volting? Or what does it do in general I’m not to sure just got my first alienware laptop and want it to last awhile
Great guide but I have a few questions. First in regards to your Cinebench score. I have this laptop with the same specs expect for a 3080. My single core score is 1126 while yours is over 3K. I'm wondering why mine is so much lower? As a reference I'm using Cinebench R23 downloaded from the windows store. Second question is in regards to the undervolt when you downclocked the cpu cores on the gaming profile. You didn't undervolt there as you did in the performance tab. Does the performance tab undervolt apply to all profiles or do I undervolt in the gaming tab as well?
Damn, you are the only one who makes full review of R4 series, which is quite useful.
I don’t know what other RUclipsrs are thinking, who cares what you like or dislike.
Btw, is it necessary to do this with m17r4? Since it’s much cooler than m15. (10870,of course. )
It is not necessary at all but you use less watts and run cooler for a few minutes of your time! Well worth it
Awesome video 🔥🔥🔥🔥
No one explains so good ❤️
Thank you so much 😀
THANK YOU
Thanks!
Thanks you so much for this! Would love to see how to undervolt my GPU and change my fan profiles. I am running a MSI GE66 Raider with a RTX 3070. I have found the MSI dragon center to be very buggy, so I'd like to avoid using it.
Well you can use my msi afterburner guide on your 3070. Also download throttlestop and see if msi allow undervolting (assuming the ge66 uses intel 10870h?) If they do you can also use my guide on that too
I tried undervolting, but the TS Bench took a lot more time, and after I adjusted the FIVR, it got an even bigger number
After making adjustments do you run the bench mark test on all i.e. Performance Game Internet and Battery. I have gone down to 70 and when running the second test on cinabench it keeps crashing. And system gets really hot. Should I wait till system cool before starting every test? I have seen some state they don’t equally change the gpu/cpu. What order could they be changed in. I need help sorry new to this
wow,i just made that setting,my cpu from 90 to 70 C now!!thanks you
Wow nice difference! It’s well worth the few minutes tweaking it 👍
what setting you used?
Definitely be interesting to see what you can do with a results comparison between TS vrs Awcc+TCC. And or full rundown of Awcc custom settings. Atm. iam struggling with custom profiles saving per game/launcher. Crawling off a roof & heading straight for a cold beer Might be hampering my computer skills just a bit :)
Haha I love it, think I might join you. But in seriousness the next tweaking video will be focusing on the end results and command centre profiles/custom profiles 👍
Thankdls for the video I don't suppose you can help? I have the M17 R1 with 4k and RTX 3080 but my touch pad no longer has RGB on it, I had to reset the entire laptop and install new version of windows on it but since the my rgb touch pad hasn't worked
I can't enable "Unlock adjustable voltage" in mine. Maybe they blocked this in BIOS. Anything else I can do? I would like to simply decrease the multiplier if I can't undervolt... Because those temps are too high and the clock is unstable...
Got a M15 R4 not too long ago, first gaming laptop ever so I am a newb and completely clueless as to gaming on PC's. So I am still learning as I go. This is definitely something I will be attempting as I found that gaming laptops tend to run very hot.
Also, would you have a video on how to upgrade SSD?
I sure can, it is incredibly easy with these so will be a short video 😁👍
Thank you for the video! However, I am noticing worse base scores on TS Bench than yours. (I'm assuming lower scores are better) Stock, I get a score of 91 and on -75 mV I get 107. What can I do to achieve scores similar to your "Dell Shipped" scores? I have an m15 r4 with an i7-10870H and RTX 3070.
I have the same issue did you solve it
What’s it mean when throttle stop hits power
I have a x17 and got a stable under volt and reliable temp from 80-85 c while long game sessions
Only error I keep hitting in throttle stop is power
Awesome video! I don’t know much about computers but I just bought a laptop cooling pad that has fans to blow colder air into the intake from underneath. Would you consider this useful at all?
I haven't tested any on the m15/m17 but I always prop my laptops up to give better airflow as they are always too close to the desk by default (companies trying to get the thinnest laptop!) therefore I am sure this will be better than putting it flat on a table 👍
Is it possible to know if your computer has been undervolted previously by XTU or Throttlestop, for example. In other words imagine you undervolt and later on you must format your hard drive. When you install your OS again after installing or recovery, will that undervolt remain and could I detect or see it in some software? Thanks for the video
Do you know how to undervolt x17 r2? Because when i use throttlestop its grayedout so undervokt not possible, i tried to downgrade my bios but not possible either to downgrade bios.
Hey, do the voltages not reset back to default on a restart, unless you run throttlestop at startup every time? You mentioned it may be hard to boot back into windows if your voltages are unstable (too low) but would they not be at default during a restart? (Until you run throttlestop again)
For me the top right corner panel when changing the offset showed 0 offset when i hit apply. Any idea to why that is?
Still learning. Love that your doing the Alienware laptops because I have one. I subscribed. Got 2 questions.
If I offset the voltage on throttlestop, then not save it immediately, and run cinebench and 3dmark. Is the results off cinebench and 3dmark based off the stock pc settings or the throttle stop offset?
What am I paying attention to when I undervolt it under throttlestop to know if it’s unstable? Do I just slowly increase till it crashes or so on throttlestop. Of course not saved. Just finding that sweet spot
Thanks mate. Once you have adjusted the voltages make sure the "ok - do not save voltages" is checked and apply, you will now see your offsets at the top right so you can see they are active. Now run throttlestop. If you are not sure if it is working just look at the watts it is using during cinenbench. Stock mine uses 105w after undervolt it uses 85w!
When you run the benchmark included in throttlestop, if it crashes or you get errors then the undervolt is too much. Also make sure you run time spy or similar GPU benchmark and also put the machine to sleep and wake it, if any of this causes a crash you have gone too far and need to back off.
Hope this helps but ask away if there is anything unclear 👍
I have the M17R4 with the i9 and have been playing around with throttlestop after watching your video. With all of the same settings you used in the video, I am now up to -160.2 on the Core and -140.6 on the CPU Cache. I have not been able to get this to crash. Is there possibly something I am doing wrong to not get accurate results? When running TS bench and it crashes what does it do? Every test so far has run to completion and given me a score so I keep edging up the undervolt.
Niceee, I need this video
Great, any questions please just ask :)
Super long shot since this video is two years old but: When I am running my throttlestop Bench my FID and C0% are never stable. Is this normal? if not how could I fix it?
Do you need to undervolt each profile or just one for it to carry over to the others? I notice sometimes after restart it doesn’t apply to the others if I undervolt only one profile so is it safe to undervolt the others too?
How come your FID are running at 39.99 all cores while mine is 35.99 after pressing start in TS BENCH? :( no tcc no running apps(except awcc) freshly reseted my m15 r4.. any tips?
This may be dumb, but the max wattage ive ever gotten my cpu to running throttlestop is 75w with a time of 86.5 on the TS Bench. Is there something I am doing wrong to not get the max wattage out of the cpu?
Thanks a lot for this great explanation! I had 2 questions:
1) I take it that the undervolt applies to all profiles as all these do is to change the multipliers?
2) Is there any merit to still use the BIOS to offset the max temps to let's say 90C? I am mostly thinking about longevity of the machine here.
Thanks!
Ok,
1. Correct, it will apply to all your profiles.
2. Yes, as an example if you just undervolt and don’t drop multipliers in balanced mode it will still creep up to 100c as that’s the way dell designed it (it doesn’t ramp the fans up until late 90s). By using tcc at 90c you know your machine will drop the watts if it hits 90c but with the undervolting you get more performance per watt so you will get the best of both worlds
@@MashITTech Perfect thank you!
Alright man. Since you know better, I decided to let you play around with all these settings and figure out what works best for gaming performance rather than getting my hands dirty. And then when that video comes out, I'll be the first one to drop a like. Also, two thumbs up for the extensive coverage you do on a model.
Haha well gpu overclock if next then lastly I will do a conclusion video to put all the tweaks together 👍
@@MashITTech sure sure. Take your time. It's gonna be a while till I can get my laptop imported anyway. Its stuck in USA. Wouldn't overclocking mess with the overall life of the cpu? I usually refrain from doing so. But if you can convince me otherwise I'll be happy to try
Please tell me what do i do if i find under voltage adjustment bar blocked?
Could you look into undervolting the M15 R5 for temp and performance benefits? I saw a video a while back on the "1usmus" which supposedly saved a bit of power and even improved its performance. I'd be on the edge of my seat to see the results of that with the R5.
I sure will for the deep dive video
Great video, I hit the lottery with an old i7 7700HQ. Manages - .170 offset is stable. One thing you did not mention, in a laptop with a colder cpu, the gpu usually also runs colder. Oh, and you can even undervolt the GPU :D
That is amazing! And yes you can undervolt the GPU, but also overclocking it is as good as an undervolt as you still use the 140w budget but with a better voltage frequency curve. dropping an afterburner video shortly to help people that have no clue how to overclock :)
@@MashITTech Awsome! There is just so much hidden potential in laptops with undervolting!
I must have received a decent paste job. With a -.075 undervolt and no reduction of multipliers, the max temperatures I got was 88C using TSBench. With Cinebench R23 I got a multi core score of 10631 with my max temp of 96C in the 10 min run. Stock out of the box the throttling bumped me down to 10216. Thanks for the great tutorial!
Hi Robert, wow that is decent. You have a good one there! Hope you enjoy it 👍
@@MashITTech It’s a beautiful laptop. The 15” is a great portable solution for such a powerful device. I opted for the 144Hz screen since I only spec’ed the 3060. But I received a decent chip there too. I was able to overclock it rock solid at +160 Hz on the GPU core. I’m peaking at 9000 Time Spy with great therms in Balanced fan profile. Not bad at all for a 3060 system.
When you did the undervolt with the different settings for internet, gaming, etc do you still use the alien command center then? Like do you use balanced, or quiet or cool or is that not necessary? Sorry just got my alienware m17 and will be using mostly for 3d modeling and rendering and wondering if I ever need to change it to cool mode since I hve it on balanced...also silly question but do I have to keep msi afterburner and throttlestop running for them to work?..Many thanks
Throttle stop and afterburner don't need to be open to function. They flash to the cpu and GPU control chips at the "firmware" level.
Generally these control softwares from alienware, Lenovo, etc. are just adjusting the fan curve. Maybe high performance unlocks a few watts (or takes away with quiet mode) but I doubt it because forcing the system to throttle does the same thing. I would use the fact that with the alienware software closed completely it will save the fan profile-so set it to balanced unless adjusting the lights or whatever and close it down to save the processing power. With a proper undervolt and thus thermals under control you won't need full fans (and if you're like me can't stand the noise) and it would make little difference anyways. Then in quiet mode there won't be enough power used to ramp the fans up. Then you would adjust the profile you would like in the throttle stop taskbar menu as it controls the undervolt multiplier and uses a negligible amount of power to keep open. If anybody knows a way to have an open application control the throttle stop profile please let me know.
Happy solid modelling! I get my X17 in a few months!
Also if you do manage to save a bad undervolt setting and you can't boot, you will have to clear the cmos by pulling the cmos (button cell probably) battery from the motherboard and that will reset the cpu firmware controller like you would do if you applied a bad overclock with afterburner.
Yes u need throttle stop to run
For some reason I can't change m fan speed to performance when overlocking on AWCC is that common?
I have my m17 R4 i9-10980HK with a -125mV core / -120mV cache. The difference in heat and power is massive. I also use the TCC (in addition to throttlestop) set to 15, this way the temps never go much above 85 degC. By the way, great vids, keep em coming 😀
Brilliant, glad to see other people making use of throttlestop it is an amazing bit of software :)
can you run a 30 min cinebench session with these settings and still be stable? that would be awesome!
@@maegnificant im now running at -130mV core / -120mV cache. Have been stable for 3 days now (0 crashes), this includes multiple benchmarks / stress tests including 1 hour cpu stress test. Seems to save approx 15w of power consumption when at full load, never exceeds 90W.
@@Andy2586 wow! I can't go that high, I'm at -78 for both. gonna repaste it soon, I think
@@maegnificant theres a guy on notebook review forum who is stable at -145 core and -125 cache. Do you have the i9 or the i7?
when you drop the Turbo Ratio Limits.. why not the Offset Voltage?
You should try a -250 core undervolt and a -140 cache undervolt reason being it can dramatically reduce power consumption depending on workload and temps, my XPS 15 7590 with a much thinner chassis can do 40-45 watts under 100% load and stay around 75-85/90 degrees, doing 4.0ghz on all 4 cores.
Holy smokes I need to do this
This crashes ur laptop
Don’t try this
This guy is certainly a warranty seller
@@RuneBa1 It may crash but not in all cases. I'm currently using an i7-10750H and the most stable undervolt by far ive achieved is -190mv for core and -90.8mv for cache.
Awesome video was able to under volt my new m17 r4 with 3070 to -132 and overclock my video card almost 200mhz over on core clock I think I might have gotten the lottery 🤷♂️
wow, I think you have the golden sample! well done mate
i have gigabyte control center. would i have to unistall it first? i don't want to confuse the laptop
I’m very curious how the 144hz panel with advanced optimus and g-sync performs (color accuracy, brightness, etc) as well as battery life and stress on the GPU
Can't wait for the one on the way with the cherry mechanical keyboard, that is one I cant wait for :)
Can you make a video for the custom fan curve?
Hi, I have the exact same Alienware laptop, and did every step and every test just like you, the results always between 80 or 88 and it's Hot.. I don't know what i'm missing or what i'm doing wrong!
I just get my m17r4 and want to undervolt it. Then I get this video lol. Thank u so much！！
Hope it helps you :) Got more tweaking videos coming!
@@MashITTech It helps a lot！！！
Hey I wanna ask one question is higher 960M score better or lower?
What is the latest BIOS version that enables undervolting for R4? There are different posts, 1.3.1 or 1.4.0, is there anybody that can confirm it?
Thank you so much for this video. My sitch: Just bought a second hand M17R3 that was running 100C on idle. Found this video, bottomed out all core multipliers(didn't touch voltage). Now it's staying between 55-80, average 65. Minimal impact on gaming. Success?
glad it helped. These did run hot out of the box!
@@MashITTech IS there any way to make throttlestop run automagically on startup? currently I have to manually run the app everytime...
Or alternatively is there a way to underclock the cores indefinitely?
My throttlestop isn’t reading the same score but it is a 3080 version but without undervolting my ts bench score is 68938 idk ? Plus I’m overclocking but i don’t think it’s reading it right
GREAT CONTENT BRO, this is surprisingly helpful!
just one simple question: when you create different profiles, do you have to adjust the voltage for each of them? In the video you mentioned "don't" but the panel adjusts itself (as you can see in the cpu core voltage box) to default (instead of keeping your changes at -85mv) at 11:37.
Thanks mate. It should apply it across all profiles. I just checked my current undervolt and it has stuck across them all.
@@MashITTech 👍
wow. amazing videos .
Does these undervolts apply to the razor blade 3080? the specs r pretty much same ..
I am not 100% sure as I don't have the 2021 model yet but Razer locked out the undervolts on the 2020 models :(
Same CPU on M17 but has vapor chamber and better cooling, so better temps in general. Am I wrong? How far did you push the M17 R4 with TStop and what temps did you get? (yep, I'm oriented to the 17" model ;-))
Hi sorry, struggling to remember as I wasn’t as concerned because the temps were so much better but from memory it was just over 10c better on load. The 15” also has a vapour chamber btw but much smaller fans 👍
There was so hype about OnePlus launch event that I missed your videos yesterday.
haha I feel hurt...kidding. Does the OnePlus look good? not even looked at it
@@MashITTech yeah they're pretty good but now they've decided to up their price significantly so that they can match with Apple and Samsung.
Oh I hate that! the price was the main reason people looked to OnePlus products!
@@MashITTech absolutely.
Writing from California: Great overview. I hope you do another, more in-depth tutorial where you slow walk us through each setting. Do you do this with any AMD processors or just Intel processors? Also, I believe that, per Intel's website, not all processors can be undervolted...at least using their XTU software. Thank you for your time in making this video,
Ravi Peiris M.D.
Hi Ravi, I am glad you enjoyed it. I can certainly take a look at doing a more in depth video for sure. And unfortunately this can only be used on intel but there are some tools that work with AMD, when my Ryzen m15 r5 arrives I will take a look at that too.
And you are correct, a lot of manufacturers block undervolting lately but Alienware have been kind to us :)
Thank you so much for the informative videos. Unfortunately, I’ve had troubling results on my m15 R4 (10980HK). I gradually brought the voltages right down to -135mV. At which point the system reported errors during TSBench testing. My best TSBench was 68.751 @ -130.9mV. What’s particularly troubling is the CPU has 4 threads which ramp right up to 100°C and stay there regardless of voltage offset. It just takes a little longer with greater offset. Whereas, the rest of the threads appear to run cooler. I wonder if there is something else I could try to improve performance?
Hey mate, can you tell me what the temps of the other cores were when the 4 threads hit 100c? I sounds like your heatsink isn't flush with the cpu die which causes a portion of the cores to be a lot hotter than the other. If that is the case I am afraid the only cure is to re-paste with quality paste and reseat the vapour chamber module whilst carefully inspecting the heat pads on the chips. Also make sure when it is screwed back you screw each screw 1 turn at a time so that the vapour chamber goes down evenly.
@@MashITTech I was, actually, wondering that very thing whilst running the TSBench tests. The others hit 85-92°C whilst the 4 in question hit 100°C fairly consistently.
Yeah, that seem like it is your problem, sorry. Not sure how good you are with taking it apart but if you are not comfortable log a support call with dell, they will send an engineer to do it. If you need help with how to handle it add me on Instagram and I can chat with you there
@@MashITTech Thank you for your prompt responses and sound advice. I’ll move forward with your recommendation. Love the channel and have subbed.
Thank you so much for all this videos👍
I’m lucky owner of m15r4 with i7, 3070, 16ram, and after completion all your tweaks system run at nice temps. RDR abt.76C.
Anyhow, as I’m just a beginner in all of this TCC, UV and OC, could you please advise.
From the box I check my Wt by TS and it show max PKG PWR 95,5W, instead of your 104W. Temps at TSbench reach 99C. Score in Cinebench R20 4055.
After UV to -0,83V, max PKG PWR is 78W and temps abt 83C. Cinebench R20 score is 4183.
When I try to undervolt more, I noticed that temps and PKG PWR still going down little bit, but also Cinebench R20 score also start reducing🤷♂️
UV -0.85 / 4173 score
UV -0,892 / 4167 score.
Does it means that UV -0.83 is a better chose for me system, cause it have higher scores in Cinebench ?????
Yes you are exactly right. Seems like -0.83 is your sweet spot. That’s a nice improvement you have made. And also glad the video has helped 😃
Nice Video! Any chance to get a guide for the M15 R6 with Intel 11800h and RTX3070 graphics card? Got my laptop yesterday and after playing Warzone it reached 86 degrees and throttled. On the other hand I am concerned about the undervolting that it may destroy the cpu :(
I have the same laptop, dell blocked undervolting in a bios update but some people have a work around
Keep it up
My m17 r4 no longer display...
Please I need help on how to make it work...
My Laptop always Freeze when I have it on. Any solution? Please help.
Hey Mash It great video bro, you spoke eloquently and I really like you accent 10/10.
I have a question for you, is a good idea to buy my laptop from Amazon or is better if I buy it on Best Buy ?
Amazon get 30 days refund, Best Buy get 14days I think or 15
Thank you that is very kind of you to say. I am in the UK, and here Amazon is the best option because of the great customer services and returns :)
Dell boi, full customization and all that.
Love ur hardwork keep it up man!
Quick question.. I have been thinking a lot lately and I didn't come to a conclusion yet I want to know if the alienware m17 r4 is the best option to get for gaming and stuff i mean.. Love the design and everything but with all of these battery issues idk am just hesitant. Is it worth it?? Pleas help
If battery life is the deciding factor then get the 144hz with advanced Gsync then you get the best of both worlds. For me I don't care about battery as I am always plugged in therefore I chose the fastest screen option
@@MashITTech exactly why i went with the 300hz ....as im always plugged in.
you can set your screen on nvidia control panel to 60hz while not gaming, that will save you a lot of battery.