@@mattp544 no it isn’t. You can see a clip where there is no hole in the middle. Then he drills one and leaves a huge crater of a dent from pushing so hard and then never used the hole.
I mean he does say that to install it you need to drill 2 extra holes which is true…. buuut he then decided to throw his brain into the trunk and crash the car and drill a 3rd one to suction it out🤷♂️
I’m sure the car owner knew what would need to be done to install a spoiler. If not, I’m positive they explained to the car owner the process it takes to put one on. It’s common sense and if you don’t know how a spoiler is installed onto a car, don’t get one.
Actually he only drilled 3, the original spoiler have 4 bolts (2 in each side) so this guy was talking about 1 hole in each side, but I don't know why in the world he drilled a third hole in the middle of the trunk 😫
no rust protection on the drill holes, lump in the middle of the trunk, typical american tuning. congrats on producing a 100% rusted trunk in 1-2 years.
Don't forget to put a rubber grommet above the washer on the inside of the trunk to keep it water tight and not damage your paint or more importantly in this case, your carbon fibre trunk lid. Just a tip 🤷♂️
Before anyone starts judging, the hole in the middle is for a long 80's antenna to be installed later so you can listen to the radio, cause' life is too short to drive boring cars..
The GTR was underwhelming af to me when i drove it, but this is my perspective- It'll never be able to show it's true potential on regular roadways, it's meant for circuits. The reason why I say underwhelming is because, take away the monster performance and the car has zero else to offer. There's better looking cars, way more comfortable cars with nicer interiors.. better SOUNDING cars for sure. This isn't 2009, the GTR has stiff comp now.
@@mrmidnight32 How exactly did you come to all those assumptions now? The GTR is not a “boring” car by any stretch of the imagination, wouldn’t you say?
@@jax9074 it is not for a cable to stabilize the spoiler. Literally every other video of these being installed on RUclips nobody drills that center hole. A cable does not make sense as it would only pull in the downward direction, the same direction of force generated by the wing. It does not generate lift. It is not an airplane wing
@rawbeejay dawg it’s not that fucking hard, especially when the entire car has a 3D rendering online by the company. Literally you can just take the dimensions of the spoiler and put in center to the car wherever level up or down you’d like, and it’s not rocket science to create a level/true spoiler.
For thoes wondering why theirs a middle hole. It’s from the old stock GT-R wing, it was to screw down the spoiler for extra stability. He didn’t drill a random hole it came stock.
Nah dude replay the video. At the beginning when there's absolutely no spoiler on, there's no hole. As a matter of fact about halfway through the video you actually see him drill that hole! 🤣
@Patrick d'Argent washers exist so that when you tighten a bolt the force is spread out over a wider area and when you are tightening the bolt over the original surface, you do slightly damage it, a washer is there to minimize the damage and be a sacrificial surface. In the video you see a small layer or rubber, perhaps if it’s on tight, it will keep the water out.
Life is too short to drive boring cars… Bet this dude gets a flame tune, never touches a track and just does rev battles in parking lots…. So many of these cars are wasted by guys who care more about IG likes than actually driving their sports/super cars.
APR performance spoilers look amazing. This car looks soooo damn good. Only thing i don’t understand is the little hole right in the MIDDLE of that trunk
@@andreiceban438 No a m6 bolt (or screw if its a inbus or torx for instance) takes a m6 nut, that takes a 10mm spanner (usually, also available in 9 and 11mm)
3 of the holes, one on left, one on right and the center one were already there from the original OEM spoiler that came with the car. But fr that dent in the middle looking mad ugly
People don't seem to understand that a spoiler like that can output over 150 lbs of downforce, this changes the characteristics of the car at high speed, and create a pretty noticeable difference in stability during high speed cornering.
@@blakesmith4454 I was talking to the people who say wings are pointless, not to the people who got mad at the shitty installation. That's a different story
@@giantmanice Maybe those people didn’t try to open their trunks yet, or don’t realize how helpful a keyhole will be yet, cause they just installed it? In theory, people are saying this guy knew the wing would be heavy and just did the keyhole to save time🤷♂️
@@blakeenloe3608 that doesn’t work on 10m bolts I’ve tried. Their will to disappear overpowers the physics we understand, as the 10mm bolts are of the flesh of a being greater than our understanding. They simply defy physics and all rational sense.
@@JayTheTruth this is facts.... I knew a guy once who went to some mountain monk place and they literally spoke about the powers on the 10mm. My eyes we're opened from that day
"🎼....into this world they're thrown; 🎶Chill in a no parkin zone...🎵 money shiftin prone.... RICERS on the storm; A giant fuckin wing...🎶double turbo 6 makes my heart sing...lemme drive that thing🎵; RICERS on the storm...."
Honestly, this person made complete sense, and now i see why people drill shit and cut stuff off rare cars, but i dont still understand why some people choose rare cars instead of spending the same amount of money on making a base one with the rare stuff
@@Mcnugget976 I’ve already said this on another comment these r35 gtrs come with a factory spoiler with 3 mounting points I didn’t realise they drilled the hole during the video. But shows how much you know about cars ahahah fool
I always find it stupid when people do this to their vehicles. Literally just buy a second trunk to do mods on. I bought a reinforced carbon fiber trunk and thats how I mounted my spoiler. If you can afford a GTR, you can afford a second trunk.
a gtr isn’t boring, but big functional spoiler on a gtr is pretty cool. something like that, at speed, would make a big difference and the hole seems to be misunderstood, they installed something there, and i’m pretty sure they only drilled through that black wrap, the stock spoiler has a bolt there
I install accessories on brand new cars with 1 or less miles on them as part of my job. The amount of times I have to drill holes in brand new cars is insane, and always a little scary lol
Instagram aero, that's why. Different strokes for different folks. People who think R35 GTRs are boring when it is not riced-out are the ones who are boring lol
@@bigt43 because the threaded bits are 6mm. The nuts need a 10mm wrench but nothing is referred to as 10mm, hence he doesn’t know what he’s talking about. And why are the bolts so damned long?
The hole in the trunk is for a trunk cam. He loves his inappropriate wing so much, he is going to voyeur it from below as he rides through town trying to clout chase
@@On_3and no shit dummy. You wanna enjoy that wing? Go push your car to the limit and actually feel what the part is doing. Otherwise stfu and go take more IG pics of your pointless build.
As I work in the food and beverage industry, I see a similar thing happening on a daily basis, people say that “for example” an expensive cognac can’t be mixed in a drink. I think it’s complete bullshit and I think that you should do whatever makes you happy
Love the massive dent in the middle of the trunk while you drilled a hole you didn’t need
I saw that too they left a random hole
It’s from the original factory spoiler it has a third mounting point in the middle for stability 👍
@@mattp544 no it isn’t. You can see a clip where there is no hole in the middle. Then he drills one and leaves a huge crater of a dent from pushing so hard and then never used the hole.
@@MisfireInc yeah ur right actually I didn’t notice him drill it the first time I watched that’s really weird I can’t see why he would have done that
I was thinking the same thing what the hell was that about
"Drill 2 holes on the oem trunk"
Proceeds to drill 3 💀
It's got a factory spoiler so there are already 4 holes so he drilled 3
@@catastrophe8336
Oh ye i suppose ur right, still and L tho
I mean he does say that to install it you need to drill 2 extra holes which is true…. buuut he then decided to throw his brain into the trunk and crash the car and drill a 3rd one to suction it out🤷♂️
Okay the third hole actually has a function so im dumb
@@bennisa8102
Yeah its still dumb tho, he couldve just bought stronger pistons for the trunk lift
I'd sue the shit out of em for randomly drilling the middle of my trunk.
You dont need to sue anyone. Just have them replace it.
🤓🤓🤓🤓
Maybe they moved the lock slot
I’m sure the car owner knew what would need to be done to install a spoiler. If not, I’m positive they explained to the car owner the process it takes to put one on. It’s common sense and if you don’t know how a spoiler is installed onto a car, don’t get one.
The fuck do you want it held on with? 3m tape? 😂😂😂😂
That hole there is custom engineered
As an air scoop
That feeds air to cool off the cheese pizza in the trunk
I’ve had accounting classes with more enthusiasm than this guy
Because life’s to short for boring people
@@midheelwhip because life is to short to fuck up your GT-R with a wing that might serve a purpose. but maybe not.
Is it a bot?
this isn’t sesame street
@@flynna most likely
“You will need to drill two holes”
*drills 7 holes*
you’re dumb, the first 2 on either side were already there from the factory spoiler. durrrrr
Lol and what was that middle hole ? For air. Most of these city “car guys” have more dollars then sense.
Actually he only drilled 3, the original spoiler have 4 bolts (2 in each side) so this guy was talking about 1 hole in each side, but I don't know why in the world he drilled a third hole in the middle of the trunk 😫
People know how to drill alotta holes :)
There was 2 holes on each side already from the stock wing
“Life is too short to drive boring cars” whilst working on one of the most exciting cars in the last 2 decades
and devaluate it
It's an R35 it ain't as fun as the previous versions
@HernanPastenes it's still the R35, there's no way its a boring car
no rust protection on the drill holes, lump in the middle of the trunk, typical american tuning. congrats on producing a 100% rusted trunk in 1-2 years.
Hey look on the bright side, the added downforce will keep the rusty trunk closed.
Bolts too long sticking out too.
@@rockonmyfriend
I don't need a wing for that. The rust can keep it shut with no effort.
not really an american thing
Noob Tuning mode😂
"Drill 2 holes" - Shows 7 holes. . .
Also, bolts are way too long.
I was thinking the same thing. They probably spent 10 minutes screwing on the nuts. These guys are noobs
They only need to drill two holes because the other four are from the original spoiler.
@@evrex-02 and the one in the middle?
@@Jessersadler no fucking clue, I have no idea why they would do that.
Exactly what I thought. Expensive kit and it came with bolts that were way too long.
“Life is too short to drive a boring car”
I’m pretty sure the car wasn’t boring before you put the wing on.
I find spoilers just bolted to the trunk don’t even look good.
Yep
@@dustybunny66 there’s a massive chance that all that wing will do is slow it down
@@dustybunny66 a duckbill would look so much better tbh
I hate this boring car sentence
Don't forget to put a rubber grommet above the washer on the inside of the trunk to keep it water tight and not damage your paint or more importantly in this case, your carbon fibre trunk lid.
Just a tip 🤷♂️
Before anyone starts judging, the hole in the middle is for a long 80's antenna to be installed later so you can listen to the radio, cause' life is too short to drive boring cars..
“Ruining a perfect GTR” by drilling a hole in the middle of trunk lid that you don’t need
Nah that’s from the oem spoiler I think
Its a wire for stability
@@wallypop2947 you can see on the video he drilled it
Its for a mini camera so you can catch whoever steals your cool wing from your boring car.
@@DemarcusQ LMAAAOOOOOO
The fact that he calls a "stock" Gtr a "boring car" drives me crazy, yeez, a gtr will never ever be boring stock or not
Exactly, why not buy a Q60 with twin turbo
Shit tint and a overpriced spoiler won't improve it either
It is boring, that's why most people who buy one end up getting rid of it like a year or two later.
The GTR was underwhelming af to me when i drove it, but this is my perspective- It'll never be able to show it's true potential on regular roadways, it's meant for circuits. The reason why I say underwhelming is because, take away the monster performance and the car has zero else to offer. There's better looking cars, way more comfortable cars with nicer interiors.. better SOUNDING cars for sure. This isn't 2009, the GTR has stiff comp now.
And thinking this spoiler will ruin the car and he will take it away shortly make this story even boring.
I love how hard he’s pushing down on the drill. 😂😂
Looks SO much better with no spoiler
Making a lot of assumptions when saying a stock GTR is a “boring” car.
Goes from boring to down right ugly and weird
Words of a guy who probably has bags, flame tune and doesn’t even touch a track. Just needs likes on Instagram and tons of credit debt
It's not exactly a high end car nowadays you know
@@SlvrWlf88 Does that mean it’s “boring” though?
@@mrmidnight32 How exactly did you come to all those assumptions now? The GTR is not a “boring” car by any stretch of the imagination, wouldn’t you say?
Large wing with stock rims, this is what everyone did back in the nfs underground days
Wheels*
@@enz0368 grow up
Had to get the perfect rimjob man ‼️💯
@@enz0368 rims or wheels, who gives a fuck, it’s the same thing.
@@sxalo1934 so you call a muffler an exhaust?
It’s like when u pick the biggest spoiler on gta
bruh buy a marker lmfao He held a carbon fiber part while he drilled it 💀
I like that extra speed hole you added, that's going to make it real fast!!!
Speed holes😭😂
@@brownthunder3944 aerodynamics and stuff 💀
Not your car, cry about it.
-“why did you install a gigantic spoiler?”
-“because I can”
Not that it probably can't even make much use of the traction, but hey, downforce is downforce
Its pretty ugly if you tell me doesnt need to be that damn big
Why not?
These people take compensating to a whole new level
This is truly the definition of RICE!
Bro who said it’s ruined? The only thing wrong is the fucking glory hole in the middle of the trunk
Omg 😂😂
True
It’s a keyhole, he did however push way to hard and dent that perfect trunk
ahhahahahahqh
@@jax9074 it is not for a cable to stabilize the spoiler. Literally every other video of these being installed on RUclips nobody drills that center hole.
A cable does not make sense as it would only pull in the downward direction, the same direction of force generated by the wing. It does not generate lift. It is not an airplane wing
This dude def dont work on cars if he calls drilling a hole a "hastle"
its spelled as haesel
You've probably never owned a nice car. It's an easy task but it's tough to do😂
@rawbeejay dawg it’s not that fucking hard, especially when the entire car has a 3D rendering online by the company. Literally you can just take the dimensions of the spoiler and put in center to the car wherever level up or down you’d like, and it’s not rocket science to create a level/true spoiler.
It's an emotional haesel... U probably know how much it hurts to drill a hole in your car... You know that if you mess up you cant go back...
@@ferv888 u can go back very easily loll
Life's to short to ruin a good thing. Less is more sometimes people.
So you won’t put a spoiler on your gtr ?
For thoes wondering why theirs a middle hole. It’s from the old stock GT-R wing, it was to screw down the spoiler for extra stability. He didn’t drill a random hole it came stock.
Nah dude replay the video. At the beginning when there's absolutely no spoiler on, there's no hole. As a matter of fact about halfway through the video you actually see him drill that hole! 🤣
Lol no plastic seal for the holes, enjoy water in your boot 😂
There’s a huge fucking whole in the middle of the trunk. No seals is the least of this guys problem.
lmao did he actually drill a hole into the middle?? I was too busy being disappointed
The holes are outside the water seal for the trunk. That's why they drilled the hole in the middle so the water can actually get in
When it rains the whole trunk gonna get flooded
@Patrick d'Argent i don’t think u understand what washers are ment for
@Patrick d'Argent not if that middle hole that they drilled for no reason has anything to say😭
@Patrick d'Argent no one’s hating bud you just don’t know what you’re talking about
That's what I am saying this is a half a$$ job bolts way to long and leaks for days they killed it .
@Patrick d'Argent washers exist so that when you tighten a bolt the force is spread out over a wider area and when you are tightening the bolt over the original surface, you do slightly damage it, a washer is there to minimize the damage and be a sacrificial surface.
In the video you see a small layer or rubber, perhaps if it’s on tight, it will keep the water out.
That one underside washer placement in the groove 💀
Life is too short to drive boring cars…
Bet this dude gets a flame tune, never touches a track and just does rev battles in parking lots…. So many of these cars are wasted by guys who care more about IG likes than actually driving their sports/super cars.
I means its their car it isn’t a waste. these cars were made for street legal for a reason not everyone has fun at the track
APR performance spoilers look amazing. This car looks soooo damn good. Only thing i don’t understand is the little hole right in the MIDDLE of that trunk
Thats everyone in this comment thread🤣
It’s on every single APR performance build. I found a thread online of people asking how to cover it up. It’s part of the design
Lovin' the mistakes bro keep it up
Dude getting roasted like the tires
The amount of aggressiveness this cars brings
"Three 10 millimeters bolts on both side"
Actually uses 6 millimeter bolt instead 🤦🏻♂️
10mm is the larger part you rotate it from
10mm bolts goes on 6mm screws
@@andreiceban438
No a m6 bolt (or screw if its a inbus or torx for instance) takes a m6 nut, that takes a 10mm spanner (usually, also available in 9 and 11mm)
And makes them about 20mm to long 😅
@@grotevin at some point I've stopped explaining metric system to americans lol
“Two holes”
there’s like 3 on each side and one in the middle. That they drilled for absolutely no damn reason
3 of the holes, one on left, one on right and the center one were already there from the original OEM spoiler that came with the car. But fr that dent in the middle looking mad ugly
@@litework3564 beginning of the video no hole in the middle
Well he said he ruined it. And you’re saying he ruined it. So really you’re not saying anything. Bc he already said. What’ your trying to say.
@@DanielMustang47 ayo! I cannot see I’m legally blind
Your all wrong it’s for a cable wire to go to the middle for stability
"Why would you ruin your car?"
"because i *can* "
My favorite job, screwing holes into carbon fiber😂
"Big gay spoiler like you see on the other zipperheads cars" Gran Torino
“Life is too short to drive boring car 🚗 “
“Until you’re broke.”
Yeah pretty much
People don't seem to understand that a spoiler like that can output over 150 lbs of downforce, this changes the characteristics of the car at high speed, and create a pretty noticeable difference in stability during high speed cornering.
That’s not the point read the comments.
@@blakesmith4454 I was talking to the people who say wings are pointless, not to the people who got mad at the shitty installation. That's a different story
🔥. Lmao. EVERYONE STAYS ROASTING THIS COMPANY 🤣
The middle hole is the elephant in the room.. So please answer 🤭.
I seen other GTR spoilers and they don't drill the middle hole.
Someone said it’s for the keyhole added.
Since the spoiler is so heavy, you gotta add a keyhole apparently 🤷♂️
@@mro4ts457 seen this wing installed in several other videos with no middle hole
@@giantmanice
Maybe those people didn’t try to open their trunks yet, or don’t realize how helpful a keyhole will be yet, cause they just installed it?
In theory, people are saying this guy knew the wing would be heavy and just did the keyhole to save time🤷♂️
“the difference between a spoiler and a wing is if you can fit your head” -Jeremy Clarkson
it was James May wasnt it?
Dude really posted this and thought it was 🔥😂
bro will be parking and scraping the shit out of it
“Need a 10mm socket”
Well I’m out
How do all of you lose your tools? Don't put them anywhere where they can be lost lol.
@@blakeenloe3608 that doesn’t work on 10m bolts I’ve tried. Their will to disappear overpowers the physics we understand, as the 10mm bolts are of the flesh of a being greater than our understanding. They simply defy physics and all rational sense.
@@JayTheTruth this is facts.... I knew a guy once who went to some mountain monk place and they literally spoke about the powers on the 10mm. My eyes we're opened from that day
Maybe if you would've kept your eye on me I wouldn't be gone
@@10mm_socket27 😂
*"RICERS on the storm"*
I got it 😁
Rice...rice ...rice..rice
IF YOU GIVE A MAN A RIDE SWEET FAMILY WILL DIE
"🎼....into this world they're thrown;
🎶Chill in a no parkin zone...🎵 money shiftin prone.... RICERS on the storm;
A giant fuckin wing...🎶double turbo 6 makes my heart sing...lemme drive that thing🎵; RICERS on the storm...."
Noise "SHOPPING CART!!!"
Honestly, this person made complete sense, and now i see why people drill shit and cut stuff off rare cars, but i dont still understand why some people choose rare cars instead of spending the same amount of money on making a base one with the rare stuff
What’s with the hole in the middle?
More horsepower due to air intake
It’s actually from the OEM spoiler they have a third point down the middle for stability
@@mattp544 it literally isn’t why do you make things up😭😂
Speed hole😂
@@Mcnugget976 I’ve already said this on another comment these r35 gtrs come with a factory spoiler with 3 mounting points I didn’t realise they drilled the hole during the video. But shows how much you know about cars ahahah fool
Fastened with 10mm bolts .. looked a hell of a lot like m6 bolts to me !!
I think it's M8, but whatever. The bolts are way to long for that spoiler. If you want a perfect car, you might place some shorter bolts.
The nuts are 10mm bolts are probably m6
Narrated by Steven hawking's less known relative George hawking's.
Underrated 😂.
Those mounting bolts should be longer lol
don't you love it when they bring up life being short into random stuff?
It’s absolutely true though
Love the washers just bridging a gap over a factory recess, sure that spoiler won't be going anywhere over time 😂
Definitely holding it very securely ha!
I always find it stupid when people do this to their vehicles.
Literally just buy a second trunk to do mods on. I bought a reinforced carbon fiber trunk and thats how I mounted my spoiler.
If you can afford a GTR, you can afford a second trunk.
Love the hole you drilled in the middle of your trunk more air flow good job 👍
Hey, at least you can actually go fast enough to utilize the downforce 😂
them : drill holes on oem trunk
me : buy a brand new carbon fiber trunk
When 100% of the time this spoiler won't be exploited to what it is intended to do lol
Nice. Giod to know where to never take my car for random drilled holes and dents.
Why would you ever do that. This is like, the dumbest comment down here
@@NepZz
God did not bless you with a brain, my condolences
@@nachosconqueso1423 right about what? why would you take your car in to get random holes and dents?
OEM wing had a purpose
@jpeg fern mannn who tf cares, that shit looks tight, and as long as the owner is happy why should it matter
@jpeg fern APR wings are beautiful. It’s his car and it sure look damn good. Cry about it cause u just don’t own a car like this🥺🥺
a gtr isn’t boring, but big functional spoiler on a gtr is pretty cool. something like that, at speed, would make a big difference
and the hole seems to be misunderstood, they installed something there, and i’m pretty sure they only drilled through that black wrap, the stock spoiler has a bolt there
For anyone stressing about the third hole it was covered wrap. He just drilled the wrap to plug the hole maybe for rust prevention 😂😂😂
I understand the holes for mounting but what about the hole drilled in the middle of the decklid?
It’s the air hole for his victims
I just fell in love with a GTR
I install accessories on brand new cars with 1 or less miles on them as part of my job. The amount of times I have to drill holes in brand new cars is insane, and always a little scary lol
Instagram aero, that's why. Different strokes for different folks.
People who think R35 GTRs are boring when it is not riced-out are the ones who are boring lol
“Wing”.
iTs A fOcKiN sPoiLeR
Jesus Christ how many times did he say spoiler? 🤣
literally “because YOLO” and i dig it
I used to call them spoilers too when I was a kid
I'll bet you can get satellite radio from that thing...TV also.
Why drill hole in the middle? There’s no actual reason…
it’s for more airflow to add hp. you should know more air = more hp
@@kanyesouth. 😂😂😂
it reminds me of my forza horizon 1 days with the gtr, that wing looked good for forza aero 😭
This mans tone sounds like a depressed AI
Bros voice sound like a new Siri update
Never seen how they install a wing on the boot
Don’t take it from them they did a shit job
I'm sure that added at least a good 115 hp🤣
Shoot it's not like he put big rear wing on a front wheel drive car lol.
Shoot it's not like he put big rear wing on a front wheel drive car lol.
life is too short to drive boring cars... what amazing words!!!
The hole in the middle is where the cables that support the wing and stop it from swaying side to side attach to the car.
BIG WANG
*Hears 10mm* : “Yeah ok time to find another video.”
Why? You insulted by 10mm or something?
@@bigt43 because the threaded bits are 6mm. The nuts need a 10mm wrench but nothing is referred to as 10mm, hence he doesn’t know what he’s talking about. And why are the bolts so damned long?
Definitely giving me “Pep-boys vibes”……. 😂
They must be track racers, not drag racers.
Why did he just drill a hole right in the middle of the trunk 😭💀
Seriously he must be trolling with this whole video.
It's for a key. You can clearly see that it have a silver lock in place of the hole at end of video
“Life is too short”😥
**drills gigantic fucking hole in the middle of the trunk for no reason**
“Enjoy the fruits of your labor”🤗
It’s a separate key hole to open the trunk since apparently the spoiler adds too much weight for it to pop. He explained it in another video
Bro is ChatGPT’s next AI model
The hole in the trunk is for a trunk cam.
He loves his inappropriate wing so much, he is going to voyeur it from below as he rides through town trying to clout chase
Looks horrible
That wing sucks I would stay with the factory look
that’s exactly what I thought
You must be blind and mentally ill to actually think that. That wing is amazing and APR knows their sh*t. Some of the best wings out there
Nice . The bolts on the mounting brackets are a little long and would look better with shorter bolts when the trunk is opened
Perfect for hooking up pedestrians on the sidewalk 😂
Not a locking washer in sight...good, professional work fellas
99.9% of “car guys”. *have never been to the track*
“Must have giant wings and slam my car as low as possible” ffs 😂
So now you have to take your car to a track to enjoy cars? Huh big brain comment
@@On_3 you think your gonna generate an effective amount of downforce on public roads? Not legally
@@On_3and no shit dummy. You wanna enjoy that wing? Go push your car to the limit and actually feel what the part is doing. Otherwise stfu and go take more IG pics of your pointless build.
You can enjoy cars without ever touching a track in your life, stop being a pathetic gatekeeper lmfao
@@user-lw2xw9nz1y or maybe it's for looks just a thought😱
Someone walks by with the perfect drill bit and the carbon fiber gone
Dont forget to seal your holes you made after with some sort of water proof tight substance to prevent future water seepage or damage
As I work in the food and beverage industry, I see a similar thing happening on a daily basis, people say that “for example” an expensive cognac can’t be mixed in a drink.
I think it’s complete bullshit and I think that you should do whatever makes you happy