This is the problem with toilets, they SHOULD be quick, easy jobs, but often there are stupid obstacles making them much longer than they should be leading to a lot of unpaid time!
gloworm aka vaillant its probably the cable conections underneath. had villiant lads out who were blaming outside controllers. bad solder joins on main pcb. it's just them they get the boards made as cheap as they can. 3.56 ill let it run and see conclusion.
You were brave taking the shower valve off without checking the new one was correct. The amount of times I’ve not checked after the customer has bought the wrong one. 🤫
Iam still very quiet had no work today got a combi to replace tommow which is a 2 day job with the flush and work Thursday and Friday not much for next week
Excellent as always bud , keep the hard work up as I speak for myself but probably many others we enjoy your content and appreciate it , looking forward to the next one 👍
Had a similar fault on a 600! Fascia was going blank when it was on the magnetic plate, turned out to be a fault with the PCB. Threw me for a loop as it only occurred after I fitted a new wireless receiver 🫣😂
@@Heatking bruh the newborn feeding schedule is no joke and just when you think you are all settled guess what ? It’s time for the 2 year old to get ready for school
I had one like that the other day where there was something that would stop it working in a particular position! No rhyme or reason to it, I moved a live cable too that wasn’t actually in the way or touching anything else and it worked! Out comes the tape 😂
Mate those siamp fill valves are interchangeable, screw out clockwise and then your just left with the body still in the cistern, handy swap 👍love your content 🇮🇪👏
Can i ask, been bugging me for a while now. When you tighten flexis and the ferrule n braid twist with it. Can the tourque left in it undo the nut? Ta muchley
![Gucci Mane & Sexyy Red - You Don't Love Me [Official Music Video]](http://i.ytimg.com/vi/j7IBqyFKT4c/mqdefault.jpg)
![Megan Thee Stallion - Mamushi (Remix) [feat. TWICE] [Official Audio]](http://i.ytimg.com/vi/5c0_u9PsrsQ/mqdefault.jpg)
How many likes can we get on this video? 1000? ❤
One of my favourite plumbers to watch. Quality work, down to earth and actually cares about the work and the customer. Keep up the good work mate!
@@olivernash6004 love that mate, thank you very much! Comments like this, make it all worth while haha.
Fantastic work Dan. Like you were never there with that soak away❤. Shower valve was a mission but u solved it. Keep it up buddy
Cheers pal! Shower valve was a little tricky but that’s the nature of the beast haha
Nice work on the soakaway mate and that shower valve job 👌
@@cputilitysolutions cheers bud. Thanks for watching ♥️♥️
This is the problem with toilets, they SHOULD be quick, easy jobs, but often there are stupid obstacles making them much longer than they should be leading to a lot of unpaid time!
Brilliant content Dan 👍🏻
@@MegaShan001 cheers pal
i am new to your channel but i enjoyed your vids some good filming and tips great work keep em coming!
@@Derekm-ls7jr thanks mate! And welcome!!
I see good plumbing I stop and watch 😊
@@Tom_Plumb_PHS i appreciate you stopping and watching mate ♥️
Excellent work Dan. Keep it up lad. 👌🏼
Cheers Mac! 🙏🏽
gloworm aka vaillant its probably the cable conections underneath. had villiant lads out who were blaming outside controllers. bad solder joins on main pcb. it's just them they get the boards made as cheap as they can. 3.56 ill let it run and see conclusion.
Keep it up ..many subs appreciate the extra effort in filming whilst actually doing the work ..cheers
@@laurieockelford4102 cheers bud! Appreciate that! Many more to come!
You were brave taking the shower valve off without checking the new one was correct. The amount of times I’ve not checked after the customer has bought the wrong one. 🤫
@@Ian20232 to be fair. Customer bought it. But I’d already been to measure it up. So was pretty confident haha
Iam still very quiet had no work today got a combi to replace tommow which is a 2 day job with the flush and work Thursday and Friday not much for next week
Excellent as always bud , keep the hard work up as I speak for myself but probably many others we enjoy your content and appreciate it , looking forward to the next one 👍
Love that mate thank you, hope you’re right! And the numbers start to go up!
Great vid as usual Dan 👍🏻
@@tomthewanderer thanks Tom!! ♥️
That condensate drain was a sweet fix, lovely, bet mine won't be that good. Love the videos. Peace and goodwill.
@@martinwarner1178 thanks Martin, yeh turned out ok the soakaway!
Had a similar fault on a 600! Fascia was going blank when it was on the magnetic plate, turned out to be a fault with the PCB. Threw me for a loop as it only occurred after I fitted a new wireless receiver 🫣😂
Interesting that. As this one turned out to be the pcb too. Passed it back because it was under warranty. 🤞🏽
Another great video mate, as for the soak away sometimes it takes a moment to realise there’s an easier way to do it 😂
Haha sometimes it takes a second pair of eyes 😂😂😂
I kept passing out watching this video I’m gonna try to watch it again today with the newborn lol😂
Is it that boring? 😂😂
@@Heatking bruh the newborn feeding schedule is no joke and just when you think you are all settled guess what ? It’s time for the 2 year old to get ready for school
@@thegrinch295 haha. Tell me about it mate :( it does get easier though.
I had one like that the other day where there was something that would stop it working in a particular position! No rhyme or reason to it, I moved a live cable too that wasn’t actually in the way or touching anything else and it worked! Out comes the tape 😂
@@RJHeating 😂😂😂 this ended up being a faulty pcb, replaced under warranty.
@@Heatking ahh fair, good spot!
Good stuff as always, where do you get your 32mm lagging from?
Cheers buddy and I get it from Plumbase
@@Heatking cheers
Mate those siamp
fill valves are interchangeable, screw out clockwise and then your just left with the body still in the cistern, handy swap 👍love your content 🇮🇪👏
Cheers mate, I don’t carry the fill valves unfortunately mate, just the washers, I carry the viva ones. But handy to know! Thank you.
Can i ask, been bugging me for a while now. When you tighten flexis and the ferrule n braid twist with it. Can the tourque left in it undo the nut? Ta muchley
@@pandaman9706 the nut should spin when tightening and not twist the actually braided part mate.
@@Heatking always seems to twist a bit when nipping up? Cheers again.
Nice work as always Dan Dan them mcalpines are brilliant it would be great if they stocked them in Ireland,😂😂
👍😎🤜
@@tonymurff5234 do they not stock them! Why! And thank you Tony! ♥️
Only screw fix has them available for delivery from the uk 😂😂
We are way behind here on new technology 🤦🤦
Cracking job on the soak away Dan, looked well neat 🎉. Chips do anything specific mate ?
@@wolvolad25 thanks mate. And they neutralise the condensate water before dispersing into the ground, limestone chippings.
@@Heatking ah I see cheers, good video mate
mate ye should be with 20 thou plus
@@davehunter6920 I don’t understand Dave sorry?
@@Heatking subs ...20 thou plus ye deserve it
@@davehunter6920 I thought that was it haha. Thanks mate! Maybe one day!
First
@@thegrinch295 ♥️♥️
If in doubt read the instructions
Haha that’s it mate
Awesome
Cheers buddy