The Toilet from hell 🔥😑🤦🏽♂️
HTML-код
- Опубликовано: 17 май 2024
- The Toilet from hell 🔥😑🤦🏽♂️#plumber #plumbing
In this episode I revisit and install a new toilet on a job, which needs the floor patching up.
Then I attend an emergency call out to a leaking toilet, which turns out to be a proper pain in the a**!!
00:00 Introduction
00:47 Revisiting this one!
06:58 Finally some plumbing!
11:40 Emergency call out!
13:53 Deep in the depths of hell!
20:20 Outro 
Хобби
Thank you all for your continued support, without you liking, commenting and subscribing… I wouldnt carry on making these 😂😂
Since PB Plumber has focused more on marathon running you have become the guy to follow
Really appreciate that mate. PB was the reason I started all this, try to inspire my content off his early videos 🙏🏽
Yes he's not intreasted now he's in with making plumbing bags etc Dan is the main man now and a nice guy not up he's own arse lol
@@charliewillis8527 appreciate that mate 🙏🏽 I’ll keep it that way too, haha we all just plumbers at the end of the day, nothing special about me ♥️
Yes ther is mate your a nice guy and i bet your customers think a lot off you as you always go that extra mile .I went to one today I have done a few little plumbing jobs for them went ther today to replace some chipboard floor for them as they couldn't get any one todo it walks in opens the unsuit door and to my surprise its all new never asked me todo that lol iam only good for the crap jobs lol
@@charliewillis8527 thank you for that mate. Means a lot! I get that with customers. Makes me feel I’m only good for the crappy jobs too. I don’t know what goes on in their minds at times!
Good video mate. You can get 3 -1/2 inch pan connectors for them old outlets. I normally cut it back to the wall and the pan connector will push straight in. 👍😎😎😎
Thanks very much, PB didn’t know this. I didn’t want to cut too much back in case I completely balled up.
@@Heatking McAlpine do a complete range of the 3-1/2" mate, I normally carry the flexi one for jobs like yours 👍
Mac extb and mac extc 3 1/2 and 3 inch
Another good un Dan, we all have bad days, glad you got it sorted.
Thank you matey!
@@Heatking ❤️ 😀
The lead connection to soil is what was known as a brass thimble. It was connected to the lead by means of wiped joint and then the pan was caulked in with possibly sand and cement
Thanks for that, mate. Didn’t know, learn something new every day appreciate the advice.
@@Heatking connected to many lead outlets by cutting off at the wall and using suitable pan connector that was available at the time. Dead easy connections nowadays with plastic pipe and providing seals don’t get damaged on installation the job’s a gud un.Only ever had to erect a cast iron soil once on an architect controlled job. The lead caulking with tarred rope was a bugger, very time consuming. Looked good when it was done though.
Fair play, one plumber to another, we all get toilets from hell.
Usually on days when we really, really haven't got the patience for them. Ha ha.
I see you use a lot of the VIVA brand stuff.... I really like them too.
Good prices and their stuff seems to cover a lot of scenarios. Gets me out of trouble without costing too much in van stock. Anyway - good vid. Keep on.
Thank you very much, mate. Appreciate the support a lot. Yes I love Viva products, haven’t had any issues with them and like you say very reasonably priced.
Another great, interesting video Dan!
First job looks great!
The second toilet - what a mess that was to deal with!
Surprised you didn’t run away screaming!
Well done sorting it out!
Thanks very much, Steve for the comments on both. Appreciate it as always. It was a shambles that second toilet.
And that's why i don't f*ck with toilets 😂
😂😂 I’ve seen you mess with them before 👀
@@Heatking I'll do a fill valve but that's about it 😂
You did really well there Dan 👍🏻👍🏻
Appreciate that matey
Nice one Ben 😂😂👍👍
😂😂😂 cheers my guy 🙏🏽🙏🏽🙏🏽
Toilets are a pain in the hole to sort at times..
Bogology dont you just love it 😅😅
Ha ha, love that. Thank you mate.
You coul just chop that flange off and get 3.5" inch pan connector inside it be fine. Theres loads of them on a contract i used ti do
Still watching was about to comment get the fluid master washer and then you got one hha
Use to love the tricky jobs keep.the brain alive.........love a bit of woodwork in plumbing, get some cleats,extra screws here and there strengthen floor.......never forget the wetroom shower tray job we did without enough bracing under it ,tiler put his foot through the only place we missed to brace lmao good days and bad days, if my knees were in a good condition id still be at it 20 years of rugby hasnt helped lol
Yeh I bet rugby was probably the biggest cause of your knees mate, plumbing just didn’t help! How bad is your luck! The only place you hadn’t braced 😬
Just like foam aren't they lol good to see ya followers going up pal
@@paulbutcherlucasskegness5099 cheers pal. Hopefully hit 5k this year 😬
Plumbing is sweet and sour ALWAYS! Roller coaster 😂😂😂
You’re not wrong there mate! Rough with the smooth!
Mate you nailed the dodgy bog, 👍
Thank you very much buddy!
New subscriber here. you did a good job 🎉
Absolute legend, thank you so much.
That looked like you literally had a sh*t day😂. Got there in the end though❤. Thanks dan
Haha I like what you did there mate 😂😂 thanks for the support as always 🙏🏽
I was surprised you didn't bring the feed pipe for the toilet up closer to the soil pipe and then use a flexi to connect. I never fit a handle and old type of flush as you still need an overflow or did the flush have one built in?
Had one built in yes. And in hindsight, I should have brought the feed a bit closer and use a flexi, I did think that when I stood back after fitting it haha
Niagara Falls springs to mind lol
You’re not joking! Why did I even try that ha ha!
Peter Pan Dan works his magic again...😉
Haha love that mate!
Have had great experiences with the Viva cistern valves thanks to your recommendations. Not so much with EPH controls though😥 two failed on same job
Arrr see the EPH I’ve had 2 fail out of about 400 that I’ve installed so that’s a shame for you :( but viva… viva is awesome stuff, especially the price :)
A copper flange lead welded into a cast iron soil pipe , lovely😭I’ve had a leak on a pressed 89 mm pipe , on a heating return today , I would not have swapped with you today 😂
Great stuff mate
Did you try to repress the fit in it was leaking on? Be interesting to know if that worked or not. Thanks for the support Darren.
No mate pipe had corroded , only 7 years old
@@darrenphillips5874 oh god. That’s not good to hear mate!
Still better than your toilet 😂
@@darrenphillips5874 😂😂😂
Thanks
Thank you so much, as always Alex you’re a legend.
@@Heatking thank you for suffering to make this video for us 😫
@@AlexRocks24-7 😂😂 cheers buddy.
I've had the Rayburn cooker from hell recently............... It's made me question my career choose and sanity! We all get these jobs sometimes, head down and get it done. 👍
Be good to know the story on that Rayburn mate. Certain jobs do question are careers. Ha ha.
Dear me mate, toilets look such a faf Dan, you have my condolences 😂
Haha cheers Matt. Appreciate that 😂😂
You can normally pull those flexi pan connector apart and shorten the corrugated part.
Yeh mate I’ve done this once. Not convinced I did it right though 😂😂😂
Dan you are the man ! Can I ask about the dead leg under the floor on the first wc? Not being a nob mate just asking how other plumbers go about problems. Cheers bud good luck! 👍
Cheers mate. Yeh I don’t know why that was there or what it had been too :/. Guessing it was a hot supply somewhere. I could have chopped it back a little but couldn’t go any further than the shower anyway so pointless really 😂
Many years ago when I was an apprentice at the council there were loads of the lead bends with the brass thimble in you could get a multikwik with a smaller spigot don't know if you still can
Thank you, Geoff. Didn’t know this!learning something new every day.
🤘😎🤘
Thank you, Wayne! 🙏🏽
Toilets are a nightmare but if YOU dont mind the dirty work there good earners 😎
Yes matey. That’s true. I don’t mind the dirty work to be honest haha. Pays the bills!
Well someone's got to do it :) I use to work with a guy and he would unblock sewers and toilets with no gloves and then go eat a sandwich and not even think about washing his hands!
Oh man, that is disgusting ha ha. Thankfully, I’ve OCD with washing my hands.
I bet he never got ill
@@andrewhoughton2617 Guy could eat anything and yeah I never seen him get sick proper old school guy tough as old boots
Most days I wonder why the fuck I chose to do plumbing. 20 years and It still is just as stressful. Never ends and water will always find a way to do your head in
I have days like that sometimes. You’re right it does your head in even when you think a job is pukka, couple of days later you can get a phone call saying it’s leaking ha ha
Don't forget to wash your hands 😂.
Ha ha. I have OCD with washing my hands thankfully.
Dan which battery air pump would you recommend luke had one the other day i have asked him but he must be to busy sorting out hes push fit fittings to get back to me
I use the Milwaukee inflator mate, m12. But I’d just get whichever one has the same battery as your power tools.
All my tools are bosch 18 volt do they do one
@@charliewillis8527 www.currys.co.uk/products/bosch-universalpump-18v-pneumatic-pump-10241492.html?istCompanyId=bec25c7e-cbcd-460d-81d5-a25372d2e3d7&istFeedId=4d7eb93e-055f-499d-8ee5-1cdcc50d67d1&istItemId=rpqaqlplp&istBid=t&srcid=198&cmpid=ppc~gg~0133+(Shopping+Ads)+GARDEN+%26+OUTDOOR+SBRE+-+PMAX~~Exact~71700000117715416~&mctag=gg_goog_7904&kwid=GOOGLE&device=m&ds_kids=&tgtid=0133+(Shopping+Ads)+GARDEN+%26+OUTDOOR+SBRE+-+PMAX&&gad_source=1&gclid=CjwKCAjw5v2wBhBrEiwAXDDoJXDTayWMmM2AzLDArsklB_hOrgXHvC-vMSxJQ6wYhLmKek_1jxEa8RoCf3MQAvD_BwE&gclsrc=aw.ds
Maybe that would work?
Why didn't you use a flexible hose ?
On the new install?
This is why I don’t get involved in toilets 😂
Haha most
Of the time they aren’t that bad!
@@Heatkingthey are, you’re fibbing to me! I have done a macerator swap though 🤮
Had a strange one today went to a unvented cylinder the vessel was flatt pumped it up to 3 bar as on the data badge then when i put the water back on i got browny coloured water out and it smelt like heating water do you think it was the water from the expansion vessel which must have entered the cylinder
Yeh I defo think it was the stagnant water out the vessel mate. It should clear itself though.
@@Heatking yes that's what I put it down to intreasting though as on the data badge it said pre charge should be checked every 6 months I can't see that happening lol .but I am pushing more on the servicing of cylinders since paying out for the ticket .when I fit a cylinder I fit a pressure gauge after the pressure reducing valve so you can easily see the pressure to make sure it's working correctly how do you cheak the pressure easily is ther a tip I have a 10 bar guage I made up with a flexible pipe to go on a outside tap but it's not easy to find a place on the cylinder to check it
@@charliewillis8527 that’s a good idea putting a gauge in after it. I have the same flexible pipe to go on an outside tap too 😂😂
3.5 extension connector then cut it down to size
Thank you very much, you learn something new every day.
Nightmare job that mate.
Cheers, James thankfully got there in the end.
Whats that device youve got next to the toilet at the end?
Which toilet mate sorry?
It was just the fan heater they were using to dry the floor out.
@@RUclipsHero666 arrr yes. Wasn’t mine that. Cheers buddy.
Dan, one word GLOVES! You used to never appear in a video without them so much so I thought you had a skin condition, now they’re nowhere to be seen! 😂 great video and stick to the plumbing/heating as you’re about as good a joiner as me 😜
😂😂😂 terrible
Joiner me mate 😂 you’re right with the gloves! You must be an OG to this page if you can remember that! I need to get back into putting them
On all the time.
I’ve watched them all except the 1hr q and a thingy with the other guy 😂
@@Bigdaftboy haha. Yeh I only did the one of them. Because that type of stuff isn’t for everyone. Made up that you’ve watched them all! 😂
It’s my weekly guilty pleasure Stacey, I mean Eric or is it Dave?
@@Bigdaftboy 😂😂 I’ll be your Stacey mate 😂
What did you charge for that toilet from hell. I’ve had a couple like this and feel bad upping my quoted costs even renewing all the iners!
£180 Inc materials mate I charged for that one. I know what you mean though about feeling bad.
@@Heatking thanks for the info. It’s difficult when the customer isn’t expecting the bill to rise but I guess we don’t go out for the fun of it. Great work as always though 👍
@@andrewhoughton2617 cheers matey!
If you don’t mind me asking as a plumber what did you charge to do that job 👍🧐
The emergency job was £180 including materials.
Appreciate your honesty , had a figure in my head , and was very similar on price.
Sometime it’s nice to get a reality check and see what other plumber are charging 👍😁🤔
@@johnsmart4692 course mate. Fully understand. If ever you want to know the cost etc on any of my jobs. Just ask mate :)
Thanks for your time & replying 😁👍
i once was once working on a toilet unblocking it outside told the client im going clearing the blockage don't flush, until im done literally just finished clearing it lid for ajay still open on my hands and knees she shouted is it clear, yup job done okay flushes immediately oh fuck full days worth of poop soup crashes down at 100 mph day ruined XD i hate everything too do with toilets
Oh my God, that sounds awful. I wouldn’t have liked the cleanup after that, ha ha.
Hope you didnt get your profit flushed away with a low fixed price? Happened to me a few times when bog jobs go south.
No, thankfully this was just come and do it. They didn’t ask for a price beforehand, thankfully.
@@Heatking lucky one that old dilemma though what shall I charge them?
@@chiron6699 yep that’s it mate. £180 I charged with materials in the end.
@@Heatking Sound. I hope they appreciated the aggro you went through.
8 mins too late
Haha you’re here that’s the main thing 🙏🏽
@@Heatkingtoilet from hell ? That’s what it feels like for everyone else who is trying to this own their own DIY.
Why you ask ? Well oh I saw Dan do it all the time on RUclips it’s easy. Yeah i can do it too …. 10mins into the DIY you are thinking to yourself this is the toilet FROM HELL !!
Thanks again Dan for this video
@@thegrinch295 hahaha. Some ones aren’t for the faint hearted! Cheers for the support mate 🙏🏽