Just really like how the stainless nutz really pop in the center. Good job and red bull please sponsor these guys please. Martin promises a Damascus can in your honor.
You may have been able to mitigate the problem with the ends by forging them down first, before you welded on the handle. Anyway, great video as always.
Looks awesome man! I was a little concerned about how your nuts were going to hold up to all that abuse. All in all, they look pretty awesome, now that you spent a while rubbing them and getting them all buffed and oiled. Good job!
@MatheisVdl He didn't remove the zinc coating. It was why it didn't meld together well during forging. That knife will chip and crack. He doesn't know what he is doing. Watching him pack the canister should have shown you that.
@ removing the zinc coating on the bolt would be almost impossible plus he actually didn’t use that steel to make the edge he made some type of San mai using good steel for the core and this knife was just supposed to be a fun challenge…
@MatheisVdl Wrong. It's an easy soak and rinse. Another person too lazy to look up readily available information. And he is selling it for $1,100. It wasn't just a fun challenge. Disgusting simping.
from nutz to cookie dough to knife 😅 and what a beautie of a knife, as always keep gonig with those ideas "damast out of ...." 👍 nice application for a sponsorship 😉😅
I would love to see someone make a fishing knife from fishhooks, a skinning knife from steel buckshot, and a hunting knife from both. That would be an awesome set.
That’s just freaking NUTZ!!!😂😂. Awesome as always!! Soooo many things to say about nuts, you could have made this one 15 minutes longer😂. Started to press X but realized that I wouldn’t be able to stand up after squatting by the fire, I’m too old😢
Noice work mate. You make it look so easy. I appreciate your skill and humor . As a hobbie knife maker myself, you give a lot of insight,and inspiration. Trying challenging steel composition is exciting, even if it goes tits up 😂. Thanks.
Yeah heard that before! But we got that whiteout for free (and when you put a liiiiiiiittle bit of breakclwaner in it its super liquid) But when my stock is gone i'll switch to spraypaint
"A" Lol Copperhead BBs smashed into grade 5 nutz and HSC powder makes a nice mix. And yes spray painting the canister is just as good..any thick layer of anything that can carbonize in heat makes a good separation layer to the core. Just use uncoated nutz..
Wahnsinn wie viel content ihr macht und schön dass ihr die Schleiferei im Video kürzt😅👍 Probiert mal den Kanister über den langen weg zu füllen. Klar deutlich mehr Aufwand, aber das muster lässt sich besser steuern, bzw. Erkennt man dann am Ende noch was von deeznut🤘 probierts mal aus. Grüße eines hobbyisten
Naja wer erfolgreich werden will muss arbeiten dafür. Auch wenns mich viele nerven und zeit kostet.. aber irgendwann macht sich das alles hoffentlich bezahlt 😊 Ich hab da ne kleine idee mit den Muttern was ähnlich wie dein vorschlag ist 😊
Sehr cooles Teil geworden, Schrottkanister sind mein liebstes! Wundert mich aber das dass mit dem Edelstahl überhaupt geklappt hat, meines wissens nach hat man verloren sobald 1x sauerstoff dran kommt, die blöden chromoxide die den stahl rostträge machen verhindern nämlich auch ein feuerschweißen😅
You should wrap the energy drink can in paper and label it as "Knife Bull" or something like that only showing the can when they actually offer to sponsor your channel.
Hey Martin, die water jet cut front bolster's, gibt's die vllt bei euch bald im Shop? Genau wie das Stahlpulver was ihr für den Kanister genommen habt? Lg
There’s tons of videos of dudes doing canister Damascus with random materials like nuts, bolts, nails, razor blades, etc etc. I’ve never seen the billet look the way yours does. Were the nuts even steel? I’ve also never seen smiths cut the “bulge” off. I think you needed more compression of the billet with the case on.
У нас больше распространены другие кухонные ножи. Этот больше похож на профессиональный для поваров, не каждая домохозяйка с таким справится. Да и у поваров, наверное, есть несколько ножей для разных целей.
@MartinHuber_Knives you know, like making soup, you take a little this, a little of that and mix it all together and see what comes out. Sometimes it good and sometimes not but at least you tried. If it goes totally wrong blame the camera guy, yeh that it, it's his fault. LOL 😆 🤣 😂
@@MartinHuber_Knives IDK, 70 bucks you said will be lost if it didn't work out, so 2k is such a small profit. Even if you include your time. I think 5k, and a Hollywood actor will snatch it up!
@MartinHuber_Knives You might want to look that up before humiliating yourself again. The reason it didn't bind well was the zinc. How are you this bad at making a knife? Isn't this your profession? You couldn't even pack the canister correctly. 🤣🤣🤣
@@Facetiously.Esoteric Could you please elaborate on 'humiliating yourself again'. When has this happened before? Also I don't know what country you are from, but in Germany/Austria stainless steel nuts are made from V2A or V4A (sometimes A1 or A5 stainless steel) and thus not coated in zinc. Also to be fair, I can't really see how his canister is any indication on his skills as a knifemaker, since, according to you, the only thing he didn't do correctly was remove the non-existent zinc from the nuts.
@@Facetiously.Esoteric I know that stainless still rusts, that doesn't mean it gets coated in zinc. But if you're so sure, shoot over some sources, I'd love to learn something new. Also you didn't answer my question regarding humiliating himself.
![[FULL BUILD] Making the Independence Bowie Knife](http://i.ytimg.com/vi/lnS1ALjbDTU/mqdefault.jpg)
You can buy this piece over at Modern Cooking!
moderncooking.com/de-at/collections/kitchen-knives/products/gyuto-230mm-600-nut-damascus-sanmai-1-2419
You mean the one that you didn't remove the zinc from the nuts before you made?
😂😂😂
Just really like how the stainless nutz really pop in the center. Good job and red bull please sponsor these guys please. Martin promises a Damascus can in your honor.
YES SPOSNOR US
Like watching a Forged in Fire Episode .... Great content....as usual
thanks buddy
Touch and go there for a bit, but the effect turned out pretty sweet! Congrats!
Thanks buddy, i actually thought i ruined it
wow, the final product is amazing !
thanks!!
You may have been able to mitigate the problem with the ends by forging them down first, before you welded on the handle. Anyway, great video as always.
thanks!
Looks awesome man! I was a little concerned about how your nuts were going to hold up to all that abuse. All in all, they look pretty awesome, now that you spent a while rubbing them and getting them all buffed and oiled. Good job!
Yeah i loved to work with my nuts they are looking pretty awesome too 😍
@MartinHuber_Knives dieing laughing over here!
Wow ,it turned out surprisingly well
Ps : I love the bonus content !🤣
ehehehheeeee
@MatheisVdl He didn't remove the zinc coating. It was why it didn't meld together well during forging.
That knife will chip and crack.
He doesn't know what he is doing. Watching him pack the canister should have shown you that.
@ removing the zinc coating on the bolt would be almost impossible plus he actually didn’t use that steel to make the edge he made some type of San mai using good steel for the core and this knife was just supposed to be a fun challenge…
@MatheisVdl Wrong. It's an easy soak and rinse.
Another person too lazy to look up readily available information.
And he is selling it for $1,100. It wasn't just a fun challenge.
Disgusting simping.
@MatheisVdl Wrong. About everything you posted. Go look up why. I'm tired of having to explain things to simple people.
You need more compression on the can before it’s removed. I go with 1/3 compression from original height to 1/2
It works everytime, exept on this one
from nutz to cookie dough to knife 😅 and what a beautie of a knife, as always
keep gonig with those ideas "damast out of ...." 👍
nice application for a sponsorship 😉😅
thanks buddy, i like those videos a lot so maybe some more in future!
Ich hätte es nicht geglaubt Martin das das funktioniert. Ist Klasse geworden.
Danke dir, ich hab dazwischen auch gezweifelt
Also, if you put the powder in the cannister but have the cannister in an ultrasonic cleaner, it would make the powder settle and not lose any.
Intresting...
I would love to see someone make a fishing knife from fishhooks, a skinning knife from steel buckshot, and a hunting knife from both. That would be an awesome set.
Some nice ideas!
Got nuts? They look great! 😂
look at my nuts!!!
That’s just freaking NUTZ!!!😂😂. Awesome as always!! Soooo many things to say about nuts, you could have made this one 15 minutes longer😂. Started to press X but realized that I wouldn’t be able to stand up after squatting by the fire, I’m too old😢
Man i edited soooo damn many nut jokes out of the video 🤣
Man my knees did hurt after like 3 minutes xD
Serviço de Top de linha parabéns irmão de outro lugar. Jesus Cristo lhe abençoe
thanks !!
Noice work mate.
You make it look so easy.
I appreciate your skill and humor . As a hobbie knife maker myself, you give a lot of insight,and inspiration. Trying challenging steel composition is exciting, even if it goes tits up 😂.
Thanks.
Thanks buddy!
trying my best 😄🙌🏻
White spray paint is supposed to work just as well as white-out, so you can probably save money and time that way. Awesome looking knife!
Yeah heard that before!
But we got that whiteout for free (and when you put a liiiiiiiittle bit of breakclwaner in it its super liquid)
But when my stock is gone i'll switch to spraypaint
Yup, the titanium oxide that is used for white pigment is what stops the cam from welding to the billet.
Always a pleasure to watch you make something new. Keep up the good work!
thanks buddy
To be honest, I was expecting it to fall apart. Great result.
actually i thought its done after the first cracks
Die eine glühende Mutter, die sich Anfangs abseilt. .... genial 😊
😄
Ich steh auf diese „damast aus“ videos🥰 kommen immer so einzigartige Strukturen und absolute Unikate dabei raus. geiles Messer geworden bro👌🏻👌🏻👌🏻
Danke brudi 😘
Gerne doch😘 bin gespannt was als nächstes kommt 🥰
The most usage of the words “nuts” and it didn’t have an adult rating. Great build and thanks for the video!
hehehe
thanks for watching buddy, as always :)
Talk about a Nutcracker... happy holidays. Great build as always
lol :D
Thanks man
Das ist echt Hammer geil geworden. Schön schlicht und doch spannnenndes Cladding. Sau geile Arbeit Martin👍🏼
Danke :)
Ja Geil, fast kein Taper am Rücken, geschweige denn bei der Schneidengeometrie. Und ne Sekundärfase wien Zwilling 4 * 😂🙏
Gorgeous. Red Bull need to sponsor you.
Yes they need to..
Hermoso trabajo.
thanks!
this is 1 of my favfs till now😍 also the editing is soo nice in this vid🤟🤟👍
thanks buddy
"A"
Lol
Copperhead BBs smashed into grade 5 nutz and HSC powder makes a nice mix.
And yes spray painting the canister is just as good..any thick layer of anything that can carbonize in heat makes a good separation layer to the core.
Just use uncoated nutz..
i like my nuts uncoated..... xD
Forging in deez nutz! That actually stuck together way better than I was expecting! Nice work dude!
I like to smash my nuts!
Lovely piece! Campfire Martin is my favourite character as of now, is there a longer cut of the campfire scene?
Campfire Martin will return soon.
He's a traveler, never staying long in an area.
Wahnsinn wie viel content ihr macht und schön dass ihr die Schleiferei im Video kürzt😅👍
Probiert mal den Kanister über den langen weg zu füllen. Klar deutlich mehr Aufwand, aber das muster lässt sich besser steuern, bzw. Erkennt man dann am Ende noch was von deeznut🤘 probierts mal aus. Grüße eines hobbyisten
Naja wer erfolgreich werden will muss arbeiten dafür. Auch wenns mich viele nerven und zeit kostet.. aber irgendwann macht sich das alles hoffentlich bezahlt 😊
Ich hab da ne kleine idee mit den Muttern was ähnlich wie dein vorschlag ist 😊
@@MartinHuber_Knives sei euch gegönnt und solange es Spaß macht 👌 ich bin gespannt
VIdeo was fun!
Thanks :)
Deez Nutz....🤣🤣🤣🤣
GOT EM!!!!
Thanks buddy
Sehr cooles Teil geworden, Schrottkanister sind mein liebstes!
Wundert mich aber das dass mit dem Edelstahl überhaupt geklappt hat, meines wissens nach hat man verloren sobald 1x sauerstoff dran kommt, die blöden chromoxide die den stahl rostträge machen verhindern nämlich auch ein feuerschweißen😅
Ja das war so das 50/50 ding.
Aber das risiko das mir das teil in der fresse explodiert wollt ich hald auch nicht eingehn 🤣🤣🤣
@@MartinHuber_Knives No risk no fun🤣 Ne verstehe ich schon, man soll ja für die kunst leiden aber nicht so😁
She's a beaut!
thanks!
Are the nuts zinc coated?
No they are stainless steel.
You should wrap the energy drink can in paper and label it as "Knife Bull" or something like that only showing the can when they actually offer to sponsor your channel.
yeah i actually should..
"When you die, can i give that to me daughter?" Great video.
thanks 😊😄🙌🏻
Got 3 words for welding up your canisters... or Prepping them I should say... White Spray paint as it has a higher concentration of Titanium Oxide
I know, still got that shit for free so i use it 🤣🙌🏻
Hey Martin, die water jet cut front bolster's, gibt's die vllt bei euch bald im Shop? Genau wie das Stahlpulver was ihr für den Kanister genommen habt?
Lg
Hab schon ein paar mal überlegt die in den Shop zu packen 😄
Vielleicht mach ich das nächstes Jahr!
Every garage has a random fastener jar filled with old screws, nails, nuts and bolts. Would a billet made from the "random fastener jar" be possible?
i'm gonna call it "Grandpa's drawer-mascus"
my grandpa has a drawer like this in his garage 😂🙌🏻
and yes would be possible kind of
There’s tons of videos of dudes doing canister Damascus with random materials like nuts, bolts, nails, razor blades, etc etc.
I’ve never seen the billet look the way yours does. Were the nuts even steel? I’ve also never seen smiths cut the “bulge” off. I think you needed more compression of the billet with the case on.
when the cannister is already removing itself from the billet its already done 🤷🏼♂️
Could you treat that crumbly cookie like tamahagane steel? Just keep cutting and stacking till you get a homogeneous billet?
i dont think it would that easy
Waitwaitwait.... does it rust? Or does it not rust? Or does it somewhat rust? Please explain!
YES
BUT NO
10:05. What song is this?
its called "Back in the game"
У нас больше распространены другие кухонные ножи. Этот больше похож на профессиональный для поваров, не каждая домохозяйка с таким справится. Да и у поваров, наверное, есть несколько ножей для разных целей.
This is a classic japanese style Gyuto shape. Our customera most loved style of blade
Dez Nuts? Will saying a pipe boom go through big brothers watching. Take all the scrap from this project and make another can with it.
SCRAPMASCUS
@MartinHuber_Knives you know, like making soup, you take a little this, a little of that and mix it all together and see what comes out. Sometimes it good and sometimes not but at least you tried. If it goes totally wrong blame the camera guy, yeh that it, it's his fault. LOL 😆 🤣 😂
Täusch ich mich oder waren deine Nuts verzinkt😂, macht das nix aus?
Schaut schon ein bisschen geil aus das Messer!
Ne meine nüsse sind nicht verzinkt 😄
Sind edelstahl 😄
Isn't this the wrong 'tube for playing with nuts?
Man the ammount of jokes i wanted to do..
Have you tried replicating weapons from video games? Kremvh's Tooth from Fallout 4 seems like it would be an interesting challenge.
i did 2 call of duty blades
Gyuto 230mm 600 Nut Damascus GoMai 1.2419
$1,189.00 Why not 4k?
why should i overcharge 🤷🏼♂️
@@MartinHuber_Knives IDK, 70 bucks you said will be lost if it didn't work out, so 2k is such a small profit. Even if you include your time. I think 5k, and a Hollywood actor will snatch it up!
We call it liquid paper here
nice
👍👍👍
:)
Omg ❤
🙌🏻
x
😁👍
MVP 🙌🏻
👏👏👏👏👏👏👏🤜🤛
X
Y
MVP 🙌🏻
X
X
MVP 🙌🏻
@ 🏆🥇🫡
You missed the opportunity saying "MY NUTS ARE FALLING APPART!!!" 😂
DAMN 🤣
It dawned on me about halfway through that you never removed the zinc coating on the nuts.
😂😂😂
That blade will chip and crack most likely.
Because stainless nuts dont have a zinc coating, becauae they are made...from stianless steel 😂
@MartinHuber_Knives You might want to look that up before humiliating yourself again.
The reason it didn't bind well was the zinc.
How are you this bad at making a knife? Isn't this your profession?
You couldn't even pack the canister correctly.
🤣🤣🤣
@@Facetiously.Esoteric Could you please elaborate on 'humiliating yourself again'. When has this happened before?
Also I don't know what country you are from, but in Germany/Austria stainless steel nuts are made from V2A or V4A (sometimes A1 or A5 stainless steel) and thus not coated in zinc.
Also to be fair, I can't really see how his canister is any indication on his skills as a knifemaker, since, according to you, the only thing he didn't do correctly was remove the non-existent zinc from the nuts.
@tecumify Stainless still rusts, kid. Yes, they do coat them so they don't rust. You can clutch your pearls all you like, it changes no actual facts.
@@Facetiously.Esoteric I know that stainless still rusts, that doesn't mean it gets coated in zinc. But if you're so sure, shoot over some sources, I'd love to learn something new.
Also you didn't answer my question regarding humiliating himself.
X
MVP
X
MVP!!!!
@ love your work!!