gas furnace fan keeps running
HTML-код
- Опубликовано: 7 сен 2024
- gas furnace fan keeps running
merch = teespring.com/...
www.valueteste...
/ stevenlavimoniere
lavimoniere productions llc
subscribe to my channel
/ @stevenlavimoniere
web site
lavimoniereplum...
Had the same problem, fan running on high all of the time. Tech said I needed a new control board, backordered for at least a month. Reading through the installer's setup instructions for the Honeywell TH8000 thermostat, I noticed the ability to do a system reset back to the factory settings. Did this and the system has been behaving itself for three days now. Also found AAA batteries corroded and dead inside thermostat, so cleaned the contacts and replaced the batteries with fresh ones. Give these things a try first.
I flicked small screwdriver on limit switch circle part. Off!
Steve, without a doubt you have the best HVAC channel on RUclips! There are many good channels, some may be more technical, but for everything, yours is the best. Your singing...don't go on America's got talent. LOL!
Nice Job Steve! The only other thing I could think of keeping the blower on would be the high limit switch being stuck open
Yah one day my fan kept running other than that system was fine- when stat called heat came on and when stat was satisfied heat shut off but fan kept running no matter what. I read a bit then removed fan limit switch and cleaned it off, inserted it (one screw) and the system has been running fine ever since. Before I did a thing I called several different HVAC folks and quotes ranged from 450 bucks to a grand. Difficult to find anyone willing to do the small stuff diagnostic first. Same as auto mechanic. Auto parts sells replacement radiator peacock for 4.99 but garages want to replace the entire radiator and absolutely will not replace just the peacock and estimates Ranged from 800 to 1300
Canaries for CO detection ha!
Lol beat me to it
I just serviced one of these about a week ago. Good job Steve.
That pen trick is awesome! Learned something new today... again!
you might have to try a few pens to find the right size you need ..
A clear barrel Bic Ink Pen tip works too,for that trick.
The singing of those canaries 🐦 reminds me to mo childhood, my mother used to have a couple of them 👍🏻
My Fan would stay on for a day or 2 after any power outage.. found out my green and red wires were slightly touching on one little part… separated them… fixed!! drove me nuts for the longest time.
Good diagnosis and repair. Nice job Steve.
2:58 gotta be the funniest “Yeehaa!” ever! Love your down-to-earth sense of humor. Great vid, thanks for sharing.
I just changed out my goodman because the last 2 or 3 years in the middle of winter I would have to replace the board or pres. switch would go bad. It was almost 20 years old, I have it in my garage now.
Ours is a 41 Year old Airco (They are the Best) and it's still running good..Keeping it for life.
@@conservativeamber1216 techs wanted to replace…ie 12 years ago…..
I found brochure for our York stellar plus, 1990, it said could last 50 years!
I’m glad you had a furnace video come through! Happy New Year from my wife and I to you and Molly!🎉
Thanks for video Steven. Just got back from having my 17.5 yr old cat put down. Had a stroke and back legs stopped working. He was fine an hour before when I took a nap. As with baby dog, life changes in a heart beat.
Sorry to hear about your loss, I couldn't imagine how it feels.
Always sad
You gave it a good life….
I played the “tap on the stuck relay” game with my control board for 8 years or so. It was nice to save the money, but nicer to finally get the board replaced.
Boards are typically under $100 lol
@@kevinfinnerty3754 2010 my hvac student friend changed limit switch
Did not remove some sort of TAB
Burnt out new control board….had to buy 2…>$100 these days…
12 years I have been dealing with limit switch sticking here and there.
1990 york stellar plus….
‘This is what one does after rip offs from 2 plus local repairmen…thru the years…
I always take a bunch of photos of the old board just in case I screw up.
Hmmm. I was almost thinking at first it would have been one of the safeties, or limits, something on the 24v side.
But being that only the indoor blower and not the induced blower running the board makes sense.
Good catch my friend.
I had the same thought originally.
raisins are not good for pups, but she probably knew that cause it looked like she didnt eat it. :)
I was worried too!
I never seen the pen trick used on those standoffs. Great video thank you
Nice job Steve. At least your supply house had that board in stock. Not fun when your regular supplier is out of stock and you have to chase one down!
What I’ve learned where to start on was if fan runs and nothing else on a call for heat check rollouts or limits but that’s newer furnaces not always the case but a good starting point
grapes and raisins. Grapes and raisins are veritable poison for dogs. After eating the sweet fruits, dogs may react with vomiting, diarrhea, stomach cramps and tremors. At high doses, the intake can cause kidney failure and even be fatal.
Hello steven please take care of miss molly. she is a beautiful dog.
Happy New Year
Yeah let's put the brain's of the furnace(a circuit board) in the blower compartment where it is subject to vibration, dust and possible static electricity!!
hello Steven I enjoyed your video, but I must say please do not give Molly any raise ns they are deadly to any puppy, i have a friend who did the same thing and her pup almost died it becme very ill, and the pup almost died....and it cost a small fortune to get her help........take care thanks for sharing.........happy new year.....
The board is 20 years old. The capacitors will have dried up and gone high resistance. May also have a stuck relay. This is going to happen to any board that old, I dont care what make it is.
Yes, i can repair this board for 50 cent
Lasted that long today replace and throw out.
Steve, my furnace fan speed is set to low for cooling. I have a Rheem 2.5-4 [1000cfm to 1600cfm] ton system. The technician said since AC is 2.5 ton, blower should be set to low. We tried Med Low but it doesn't dehumidify like it should.... anything higher, it doesn't even cool... and the differential is way off. Heat speed is set to Med. Low.
Sounds to me like your unit is oversized
But in all honesty do your self a favor and call a real HVAC tech
John Ashworth 👍
With that Goodman gas furnace known for heat exchanger failures the family has plenty of carbon monoxide detectors with those Canary's lol. The undersized return opening I would say not a good thing as well as dirty air filter = Heat Exchanger killer lol.
Good thing they have all those carbon monoxide detectors 🐦in there in case anything ever goes wrong with the furnace 😂
Lol just what I was thinking. God's co2 detectors. Wake up birds are dead you got a problem
Didn't they use those birds for detecting poison gas in the mines back in the days !!!
Fan is running to catch the gas bill LOL
Another great video from Steve. Never understood why anyone would want a bunch of birds. I’ll stick with my cats.
Chickens lay eggs and are SO FUN TO WATCH!
And chicks are 24/7 video entertainment for my cats from a distance!
Jesus. You might wear a respirator with all those birds. Always love watching your channel because it means my furnace is like... spotless... in comparison. Just cleaned my flame sensor and changed the furnace filter before Christmas. I even shopvaced the return and fan. I change filter every month (just set an alarm on your phone).
Those birds are there to detect carbon monoxide leaks a la “canary in a coal mine”.
Ditto on flame sensor…one video guy said EVERY TRIP he cleans the fame sensor, it is such a common problem…nice!
That year furnace ran all winter no problems!
Good job Steve. I loved the pen trick. Awesome!
"what kind are they, their yellow" lolz ! Good one Steve
For once you didn’t have one of those on the truck!
She's a crusty one, Mr. Grinch. LMAO
How can some People Dislike a Knowledgeable Person and Video..Makes me Disgusted that people have No Life and dislike a Good Video..
They must really have No Life.
Happy new year Steve, I see Molly is doing very good.
the birds like you, Steve!
Hi, I have a question my Thermostat works but it do not stay at my set point if i set to a temperature like 80 it will start a/c but bring the house temp to 74 or 72-- A/c start & shutdown but not at my preset temp--I changed Programmable thermostat to Manual Round Honeywell but same --I cleaned the control board at furnace where there was some water leak above furnace whole house dehumidifier-Please help
move the thermostat closer to the intake (return) air.
@@david19226 u thanks I will try ,but )at 10 years it was at same place working fine
Get a new thermostat
That furnace is for the birds!
Goodman control boards are pain. Good job, Steven
What an uninformed bird owner! My Sister has a large bird & they told her NOT to have them in the kitchen or near the gas burners. Also ... no exposure to Teflon pan use!! Could be fatal!! This Lady is not a good bird parent! Too many!
M
"What kind are they, their yellow" about the birds @ 2:46, lol
The dandruff from the birds do a number on the filter and furnace components. Shorts them out in due time. Air filter should be changed every 30days in that place.
Thx! No raisins or grapes for dogs reminder!!! Dogs are awesome
Good job Steven you one of the best THANK you for the video
Sounds like you’re working in a rain forest.
MrDoeboy356 👍
Birds are very sensitive to any level toxins in the air (Including gas; aerosol sprays etc...). A furnace room would be out of the question!! Plus, they need some daylight to thrive. Looks like a bird dungeon to me. The HO needs an educational adjustment visit from a humane society. Amazing how people neglect HVAC equipment and then complain about repair costs.
Check your limits then check your gas pressure
Goodman boards are junk and that's a fact granted this one was 20 years old I changed 11 last month unbelievable
May the " Birds" of Paradise fly up your nose ... Lol ... Bic pens will be your next sponsor ... Good vid Stevie boy ... Miss Molly looking good after surgery ...
Changed out several of them !!
Hey, it's a "Junkitrol".
Nice repair, Steve Lav.
Nice work Steve!
Thumbs up for the pen trick! Learnt something new!
Molly is such a good girl and soooo cute.
Wil Miss Molly chase a rabbit if given the opportunity? She's a keeper regardless!
Bad place for the birds, that fan noise would run them crazy!! Worked years in a pet shop, i Know! LOL!
bahaha that filter in that furnace with those birds around needs to be changed every month to two months at least from my own personal experience.
the baby dog is a workin' ya'll ..next level...next level..1/1/2020 hbaggers spirit bro
Let's have a bunch of pet birds and stash them in the utility room with the furnace and water heater. Them ain't pets, them dinner!
Great job and video like always
"Houston , we have ignition!"
Great this video happy New Year to you Steve and I like dogs
Birds should be Flyin' or Fryin'. Never caged.
Will we have to pay you royalty to you if we sing ". . . you're a crusty one Mr. Grinch"?
you da man mr. crusty grince! question tho, is the electrical legal? shouldn't that be in a box? non furnace man, just enjoy you, miss molly and videos
i changed the thermostat and the fan began to run all the time under any
setting off or on.... then i put the old thermostat back and pulled
the cover off the base and it does the same thing fan still comes on... i
checked the limit switch, roll out switch and pressure switch with
the multimeter and it read 0.00 not "OL" ( except the pressure switch
reads "OL" which is normal i understand) then i used a jumper wire to
connect the wires to each switch directly but the fan still comes on....
then pulled off the G and R thermostat wires from the board completely
and the fan still ran , NOW im runing out of options
Did you find answer?
@@learnjcbskidsterchickensga7594 bad gas valve ..its one of those electronic ones
Goodman nutorious for boards going bad.
oh molly how we love you and your sweater
Smuggled in finches for them underground singing contests. Weird right?
No snow yet ?
Can wait to see the trackless eat lunch 😊
The birds are canaries
I'm a breeder too
Happy New Year's, Steven and Miss Molly love U Miss Molly
Those birds! I guess you see everything.
Are you STILL doing your Fix-it Videos bro? I am REPLACING a BAD GAS VALVE. I've looked up the specs and the tests on it. 24V Across the GAS VALVE, but it won't OPEN. The IGNITER is NEW: the Flame Sensor has been carefully cleaned. I have dusted and vaccumed out the vents and the ENTIRE Vent SYSTEM. I get the code 34. it HAS to be the Gas Valve, right my Professional Brother of 30+ years? Please ADVISE me. The IDB is in GOOD shape, The Thermostat is a Digital Honeywell. This Furnace BREATHES from three PVC Pipes that run to the outside of my house. If you're STILL doing Videos bro, please, PLEASE advise ME!!!
LOVE your SHOW!!! you keep it GANGSTA!!
How did it go?
Limit switch?
yellow canary city ! good job steve!
Maybe a burned out capacitor
I can tell one of those is a male canary.
I've on your videos all day. New subscriber here. I have an issue that started a few weeks ago. My came on by itself and stay on for hours then just turned off. Read it might be a filter so I changed them both. Fast forward to today and I had my ac running and it blew cold for hours but when I went to turn it off it stayed running but with cold air just room temperature air. The condenser isn't running, but then when I tried to turn the ac back on the condenser didnt come on again. Any ideas
what code was blinking
It was a rapid continuous flash which for those furnaces isn't really a code just the board going crazy
That flash can also indicate unit is on stand by.
Fast forward to 7 mins to see the gas furnace lmao
good job
Lack of maintenance and dust took out that board. My guess
Finches she is a breeder. Those cages give it away. I'm a bird person myself.
Ray Ray 👍
Man your videos are just fantastic. How much do you charge to swap a board ?
@@cooldog60 -- You got ripped.
@@cooldog60 holy cow .
cooldog60 so it was not the circuit board after all?
cooldog60 so you took the board back For a refund?
canaries
What was the emergency alert for power outage ?
shes a chirper mama
"she's a crusty one, Mr. Grinch"... damnit! now it's stuck in my head!!
Bird dander kills filters, fans, coils, anything that sucks or breaths. Hate bird dander!
Almost forgot, with all the dander inside the heater, should have checked the blower wheel. Bet it was clogged causing restricted airflow.
Boy, you see a little bit of everything don't you Steven?
Find the relay that controls the fan and give it a smack. If the fan kicks off, then it's the board. If it keeps running, then it could still be the board.
Ugh those fucking birds would drive me crazy.
That's how people spread the Bird Flu.
Here Kitty Kitty😂😂😂
Hey Steve. Do you still have your chickens?
Your dog is afraid of movement. Fix it.
Do the old boards get rebuilt?