Ultimate How to Overclock Pascal GPU Guide - GTX 1060, GTX 1070, GTX 1080, GTX Titan X
HTML-код
- Опубликовано: 22 авг 2024
- Check out Cooler Masters newest Maker Case ... Mastercase Maker 5 at www.coolermaste...
1:34 - Tools Needed for Overclocking
2:49 - Getting Started
3:24 - Getting Familiar with EVGA Precision X OC
5:00 - HW Monitor Setup
7:30 - What is GPU Boost 3?
10:57 - How to overclock using GPU Boost
12:21 - Pascal Voltage Adjustment and Explanation
14:43 - GPU Boost 3 Manual Settings
15:37 - What is K-Boost?
19:41 - What is Artifacting?
► Amazon US - bit.ly/1meybOF
► Amazon UK - amzn.to/Zx813L
► Amazon Canada - amzn.to/1tl6vc6
○○○ All music provided with permission by audiomicro.com
SUBSCRIBE! bit.ly/sub2Jayz...
WATCH MY MOST POPULAR VIDEOS!: (link)
••• Follow me on your favorite Social Media! •••
Facebook: / jayztwocents
Twitter: / jayztwocents
Instagram: / jayztwocents
About JayzTwoCents
Your one stop place to shop for fun and educational videos on all things tech! Oh, and don't forget gaming! Gotta make time for gaming!
Ultimate How to Overclock Pascal GPU Guide - GTX 1060, GTX 1070, GTX 1080, GTX Titan X
• Ultimate How to Overcl...
JAYZTWOCENTS
/ jayztwocents
Since I can't buy a 3080 I'm here instead...
Same
Broo🤣🤣🤣🤣
:(
Bro same 😅
Same.
Important: You don't need to change the nVidia Control Panel setting to maximum power. Keep it at "Optimal". All maximum power does is keep your max non-boost GPU clock on at all times. So for a 1070 that's ~ 1500 MHz all the time, which causes the card to heat up just sitting at the desktop. Otherwise it steps all the way down to 140 MHz. It makes no difference in games or benchmarks, I tested it. Your clock boosts up while under load anyway.
My results: EVGA 1070 Founders Edition cannot go above 2000. It stays pretty close though. The maximum overclock I got was +200 GPU and +600 memory. I assume those 2200MHz cards Jay was talking about are aftermarket with higher power delivery. I was surprised at how much performance I gainen. I went from a 5500 to a 6300 score on the 3D Mark Time Spy benchmark. That difference is more than the entire horsepower of the Iris Pro 580 haha.
When we are testing our overclocks we want it at max power. Afterwards you can put it back to optimal.
Sure, though it makes no difference during the actual testing. It helps to see the numbers in Precision X and test with K Boost before benchmarking, sure.
Ehhh well max power actually keeps my overclock stable on games like GTA V and Doom for my 1080. I'll explain: all the benchmarks I tried were able to keep a stable +225 core/+500 memory overclock, including Heaven, Valley and 3DMark's stress test. I made sure to do several tests of more that 1 hour, sometimes even 3 hours. But for some reason whenever I played either GTA V or even Overwatch it kept crashing at random points in time, sometimes 15 mins after I started playing, sometimes after a couple of hours. I even turned the overclock down a lot and it kept crashing still. There was a point when even with no overclock the card crashed in GTA V. So I turned on Max Power on those games and after that the overclock ran smoothly. I don't know why but it seems that the constant fluctuation of the clock caused by Optimal made those games unstable. It could be my card though, but it seems weird cause since then I've never had a crash in a game anymore.
Not accurate. It should actually be kept at Adaptive for Global Settings, and for the games you need/want the best overclocking, you set those profiles to Maximum Performance. The Optimal setting has been known to cause all sorts of performance issues and it should never be touched. Adaptive on the Global setting will allow the card to downclock to it's minimum frequency when not in games and dynamically adjust the clock speed as needed when you don't need maximum performance.
I tried around +100 on my 1070 and it crashed, what's going on there?
this video could not have come at a better time, I just got a GTX 1060 yesterday and have been struggling to overclock it. Now with this video perfection!
thanks so much for the help
Thanks Jay, my EVGA 1070 FTW is now pleasantly humming at 2151MHz with a max 59 degrees Celsius under load; you Sir, are the man.
Mine is 2037, with +750 on the memory. To be fair, I have a gigabyte card and use msi afterburner. It is also at a similar temp
I love how as soon as he upped the fans, you could instantly hear the change over his mic.
Still, I'd like to hear more about memory overclocking.
It's always all about the core clock this and that, and no one ever talk about memory clock.
It does make a difference, but not as much as the core clock I'll give you that.
same here. The old R9 390 I had really picked up the performance when bumping that memory clock up. I cant get my 1080 to do +25 on the memory without crashing.
Update...if I use Afterburner, I can clock VRAM to 11Gbps. Not with X-OC. I think EVGA software sucks.
It does very little. Maybe a few frames here or there.
Core clock is where 90% of extra performance comes from
Memory oc is practically useless unless you are specifically going for records
It's jus to the icing on the cake
Thanks Jay for this video. I recently bought my EVGA SC 1080 to be put into my new WC build. I always wanted to overclock but never knew how to correctly do it. This will help me a lot.
Wow a video on my birthday, telling me how to overclock my "birth day" PC! Thanks Jay!
So the precision X oc wont run with my Titan X Pascal? Only says "This version only support GTX 1060 & GTX 1070 & GTX 1080" great...
you financially power throttled lol
Just run msi afterburner
You can always buy always the newest most expensive GPU that the OC software supports, so what if a RTX 3090 TI Super were not to be in the list of supported cards, just buy the RTX 4090 TI Super Duper Extreme OC Uber Gaming edition, it costs just a few mere thousands lulz.
Jay is probably wondering why this video is still pulling alot of views 🤣🤣🤣
😓
He knows my dude
I'm new to PC, got mine a month ago, and have been watching your videos like crazy, tryin to learn as much as I can. I'm playing Ghost Recon: Wildlands I got a EVGA GTX 1080 SC ACX 3.0 I boosted My GPU Clock offset +100, and the Mem Clock offset +100. My Gpu Clock got 2100 MHz, My memory Clock got 5005 MHz @ 44-50 degrees Celsius My power Target was 115% 83 degrees Celsius, with aggressive fan profile...keep 'em coming. I'm running ultra settings in 4k @ 40-60fps, where I was getting 30-50fps. I'm just starting to stream, and your videos have been extremely helpful teaching this noob the ropes
I got my EVGA 1070 FTW today, love how it went to 2020MHz out of the box, going to see what I can get out of it tomorrow!
I don't know why but my gtx 1070 power is bouncing over 100%
my gtx 1080 g1 gaming keeps hitting 100 aswell, so annoying,....
2160 core and 550 on memory, on my 1080 strix that i got today stress tested it for a few hours now and so far stabile
What's your temps? I'm hesitant to go farther than 2063 cause I'm hitting 76-78C. I'm also in an MITX case so that's not helping matters.
I was able to do 2151 core and 5508 mem with 100% volt and 140% powr limit max temp 50c watercooled
Brought it down to 2126 to keeps temps at 47c on load
+Texan Warlord liar
+Texan Warlord liar
+Adrian Nastase lol I'm not lying.
Thanks Jay! Your tutorial helped me get a great OC on my EVGA GTX 1070 FTW. I got +160 gpu clock, +580 mem clock
Finally built my Ryzen 1700x / gtx1070 and you've really helped me understand the overclocking procedure and software. Thanks to you, my card ramps up harder and gives me much better, stable FPS!
Hey can I know how long that lasted and what’s the safe amount to overclock them
when the bios editors figure out the pascal bios... you planning on doing a no gpu boost bios flash?
well you mentioned k-boost, so i believe i know where u stand on this ^_^
I personally dont recommend maximum performance in nvidia control panel. My 1060 then holds 1506mhz even in idle, which leads to increased power consumption.
yes
good point, but should we care?
In another comment he said maximum performance for when you over clock then put to optimal after
I have done the 3 steps in another video that you did. I have a EVGA 1070 FTW Edition, I am not brave enough to do the Clock overset. I have changed the power to 112%, changed the priority to temp to 91 degrees C, and I have adjusted the fan curve. I am hitting 1974mHZ. I am very happy that you did the other video I believe it is called "how to overclock without overclocking." I don't know what the other 1070s are getting but that is just what I have achieved. My temps have climbed into high 60s but not much higher than that.
I recently purchased a EVGA GTX SC 1070 and out of the box the power percentage fluctuating from 0-1 through out testing and gaming is this something I should be worried about?
My EVGA 1070 SC is hitting the power limit all the time. Tried maxing the power and temp targets, but it still does it.
I have the same card... and the same problem. Do you have a fix? I thought maybe I don't have enough power or something? Idk I throught 750 was enough for what I have lol
same, my g1 gaming keeps hitting the power limit, making me crash at high clocks
Same
So Jay.... I overclocked my EVGA 1060 FTW+ DT, and the settings are GPU clock = 2020 MHz, MEM clock = +375, GPU offset clock = 225 MHz, power target 115%, and temp target is 90 C. I'm running about 70% load, and a solid 60 FPS @ 2560 x 1440 resolution. It's my first try, but don't want to stress it too much, still a bit scared. Thanks for the video, it's awesome, and informative. Keep it up, love watching all your videos. Your Pal, Ogre (We met in Seattle). Thanks, again for signing my side panel, and no I'm not going to eBay it.
Just bought a Gainward GTX 1080 Golden Sample and got it stable at 2138 MHz Core and 5400(10800)MHz Memory clock at 72°C without any more noise than the case fans.
Thanks for the great tutorial!
Setup:
Intel i7 6700k (no overclock)
MSI Z170A Gaming M7
Crucial MX300 525
be quiet! Dark Rock 3
Cooler Master Mastercase Maker 5t
be quiet! Dark Power Pro 11 850W
Is it ok for these graphics cards with 0 RPM fan modes to keep jumping to 50% and back to 0% every 3 minutes, or would it be better to sit it ar 20% constant?
25% constant, i have to keep my gpu fan at really high rpm like 80%+ in order to not get over 80 grades, idk why it gets so hot
I thought Pascal overclocking was basically everything went to 2.1GHGz ish and that's it.
EVGA GTX 1070 SC: 2113 Mhz gpu overclock, 4204 Mhz memory overclock. Thanks for the video it really helped me make sure that I did this right, love the channel. I just finished my first build and wanted to make sure I took advantage of the extra headroom my hardware gives me so this really helped.
Thanks! I needed my hand held and you were there for me.
you said the power limit should be at 0. But my power limit always bounces between 1 and 0 the power usage change between 50%-100%. I even try to set the power to 95% priority. I have nothing else changed, the setting are at default.
Jeff Gao same problem here
same problem i have the gtx 1070...
same problem
As long as your clocks don't change you're fine.
SoEpix my clocks constantly bounce around between 1800 mhz and the highest I've seen was 1978 mhz. Is there any settings i should apply or take off? I didn't even apply an overclock yet i just have voltage, power target and temp target on max. With priority set to temp target.
omg i love evga i overclock ed my gtx 1070 ftw to 200 MHz on clock speed and it cash but evga reset clock and it fix it self
Dude, thanks so much for this. This is the first video that didn't make the explanation complicated😆🖒
DAMN ! That was simply the best video I've seen on this topic. Well done, extremely and informative. Thank you.
could you walk me thru overclocking a GeForce 3 ti 500? i can't seem to get steady FPS in no man's sky with it. Am i bottlenecked by my Athlon 64 3200+?
yes
Holy hell just buy a new computer. you're lucky to run anything current
+Sicarius That's the joke.
You really don't want to overclock such valuable parts!
uahauahaau, its really?
Hey Jay, quick question. What do you think of memes?
Please change your name and profile picture.. dat boi is a dead meme.
And check out my Instagram meme page its @requiem.for.a.meme.v4
aids
i follow you
not dat boi fuk that
dat boi is just a memeries now
Jay. I have spent a good penny for my first build. after 4 months I have just upgraded my 970 gpu to a 1070. I have wanted to overclock. with your video you will make this happen. please post a video on cpu overclocking. you are the best and thank you for all your good works.
Just got a pascal GPU thank you, sir, for making it easier to understand.
Can I use the EVGA Program when my card is Asus?
Yes you can, I have a Gigabyte card and it works completely fine. :)
thanks!
I hope you disregarded getmykills. he is a poser
lorem ipsum
Lol love you too babe
i was wondering the same
got 2062 mhz gpu +120 and 4689 memory +685 on my msi 1060 6gb oc
Mine MSI 1060 6GB OC is at -> 2126Mhz(+180), 4705(+700), reaching max. 72(c). ;)/ +200 at core clock i've got crashes etc. in Witcher 3
i did get higher but got artifacts in some games
mrman well i tested mine in Witcher 3, Rise Of The Tomb Raider and Dirt Rally i had no artifacts/crashes so im happy ;)
+mrman I have a very similar OC to yours on my 3GB 1060 Gaming X by MSI. +130 Core @ 2062 & +700 Memory @ 4704. What concernes me though is that in all my tests (with past drivers). For Heaven & Valley, Core always came down to 2050 even with a +150 after a few hours. I'm going to test it again soon it's just puzzling as to why RuneScape boosts the card to higher more often.
Sad face lmao my superclocked with the one fan hits 82 c at at 1900mgz without even touching the voltage lmao
I watched this guide for the first time 2 years ago when you uploaded it and am only now (after rewatching it multiple times over the past couple of years) able to understand how my 1060 keeps changing the voltage and clock all the time. Time to get the V/mHz curve in order!
Thank you for the guide Jay! I managed to overclock my GTX 1070 FE with a 300 mhz linear offset on the core clock and 625 mhz on the memory clock. This gave me about a 1,500 point increase in 3D Mark Firestrike!
My GPU Blew up...
HarryProductions F
f
f
f
F
For some reason my Precision XOC doesn't have a GPU voltage monitor.
Mine either wtf
Can't on mine either
Your card may not have a voltage sensor, so what card you have?
GTX 1070 EVGA
Just got EVGA GTX 1070 FTW. Highest stable overclock was around 2050mhz. Thanks for the video Jay it helped me a lot.
Fantastic video! Informative and user friendly, especially for beginner overclockers like myself. Job well done
My power limit keeps hitting 1 but I haven't even changed anything yet?
same here, ran a baseline benchmark in unigene heaven and the power limit in precision x is just bouncing between 1 and 0 then entire time. using asus 1070 strix non oc.
I have a gtx 1070 and I am gaming at 1080p
Why the fuck am I watching this video ?
dreddjenkins
do u actually game at 3 monitors?
Enzo De Rezende Yea lmfao, useless af
Because the 1070 is a 1440p card? How can you say no to better performance?
Use DSR!
Got a 1070 myself, and even at 1080p it struggles in some games x) Plus, DSR is nice and all, but fucks up your steam overlay
This video made 100% sense. Thank you for such an amazing breakdown of each function. I'm going to start working on my Asus 1060 6GB Strix card now.
I am not a gamer. But after all these years of using gtx cards. I never knew about going in the nvidia control panel and changing that power setting. Just did it and now it moves faster.
I'm enjoying my 2 Pascal TITAN X's, what about you Jay? :P I find it hilarious that my TITAN X's OC to 1853MHz without even touching anything, just bonkers man.
gratz :D
loving my new 1070, but i do wish i could afford to sli like that.
+Stephen Oliveau 1070 is a great card dude
Nice cards but water or nothing. Otherwise you have 1500mhz or a jet engine.
What program are you running? I couldn't get PrecisionX OC to work with my Titan
Tried pushing it? Got to 2025 with a little prodding, but I'll wait for my water loop before keeping it there. :P
Precision XOC is the worst,half the functions do not work.
Is this true? I have a new 1070 Ti FTW 2 and I ran the auto OC feature. but it didn't save. I also can't figure out how to save the profile! I'm used to MSI Afterburner and it was so simple.
@@DanielYengle You can still use afterburner even on Non MSI cards :)
2020 anyone? lol still got this card
Still got my 1070 going strong running some of the most modern games 80-144fps at 1080p
@@Chevifier Got the same card here. It's held strong. Only thing that really seems to matter to it is ray tracing , but that's still pretty niche right now.
2021 1060 gang
Found out I have a very nice EVGA 1080 hybrid, currently stable at 2126 with no artifacting, and maxing at around 54c, thanks for the help man :D
My GTX 1070 hit only 2050Mhz after higher then i get textures fails ..
that's a normal clock most can't go higher
you lost then. sad day
I lost the silicon lottery and got a card that over clocks to 2025.
that's still probably 300Mhz higher than boost, so i wouldn't complain
my gigabyte gtx 1070 got to 2100 stable, but the card itself was glitchy. Returned that for MSI 1070 and I can hit 2050 stable. Some games its fine at 2100 but only with vsync capped to 60fps. I have a 144hz monitor and if i let the fps fly then i get artifacts. So 2050 it is. those extra 50hz only give like 1 or 2fps more..I'll live
what do you do if you hit your power limit
can't do much, if you want anymore juice you've gotta create a custom bios setting on the card, which then you're really playing with fire.
what do I lower to make it stop doing that
EVGA GTX 1070sc Black Edition - +100 to core +300 to memory
thanks for the tips! couldn't have done it without your videos.
Keep coming back because although not a nub.... it is nubie friendly... Keep it up man you do well.
just to note if you put power managment on maximum performance that means your gpu will be running underload 24/7 even when your system is idle, i have it on adaptive and oc my gpu to 2050mhz just fine
Thats not true.
first comment gets reply right?
sure
I gave you a second reply. Don't you just feel like a special snowflake.
+Hey, that's pretty above average!
+Hey, that's pretty good
+Hey, that's pretty neat.
I overclocked my 1080TiSC2 and ended up with artifacting and rainbow stars for a few minutes after I took the clock back down to stock, but maaan that scared me for a minute there. Thanks for the explanation on that!
thank you, I built my first computer with a 1070 super clocked and I6700k, crashed at first by adding 250 to the gpu clock offset, with your vid i'm getting better at fine tuning and drinkining. Im using benchmark valley, will update when I get a 144Mhz 4K screen.
How to overclock an AMD GPU
Oh wait you can't
You can and percentage-wise(what matters, not the actual numbers), it overclocks as good as Nvidia.
+IIIRattleHeadIII you can overclock 30MHz if you're okay with drawing as much power as a 1070 LOL.
CrackedDylMil an Asus RX 480 consumes only 25 Watts more than an Asus gtx 1060.
The rx480 does not OC really well.
Drannoying HV it does, there are people who push the cards to 1470Mhz, which is a 15% overclock, overclocking the gtx 1080 to 2070Mhz is a 17% overclock, so it's NOT much different.
I now have a evga gtx 1070 sc lol come yesterday
So do I... Got the FTW edition though, far better overclocking ability :)
well im on sc edition I can get 2168mhz clock 500+ memory 100+ voltage
***** The FTW is the superior card lol
***** Yeah, but the FTW is a superior card, which was my point :P
+Matt You are extremely arrogant dude. While yes, the FTW has more PWM Phases, and a (slightly) higher factory overclock, it really is not that much better at overclocking then the SC. Exact same cooler, exact same GPU. Maybe you will get a very slight increase OC ability over the SC, but it really isn't big enough to make it "far superior" to the SC, as you say. Do your research before you try to act like you know what you are talking about, or brag about paying $20-$30 more for a card, that is essentially the same as the cheaper version.
msi 1070 (reg gaming version, non x or z) in Heaven I'm set at 60%V, 110MHZ core, 475MHZ Memory all with fans set on 100% after 42* temp. Stable in Heaven benchmark hitting 54* max temps. Running a few games I had a stutter here and there but could have been game itself. So far so good. Going for more tomorrow. Thanks Jay for some great vids!
Hi, I have a PNY 1060 3gb that i am running at 2101 on the core and 4498 on the memory. In Hevan Benchmark I get around a 2650 score running 1920 x 1080 Ultra with 2x AA and over 60 FPS. I love this card. I was able to get this over Christmas for only 200 so to me some of the best value for money out there,
Does this work with non-evga cards? Like a zotac 1060?
No. Don't overclock any other card.
Emil Schjerven Brenden did you try to oc your zotac 1060? whats the result?
Oh it works Ive been messing with it for a couple days :P
yeah any overclocking software will work
Poop :D
Overlock it
+TechXSoftware wouldn't that just be turbo diarrhea.
would be a shitty experience..
+TechXSoftware Well it his hatch will produce more shits if over clocked.
I pooped.
i was doing that while watching this
im on a budget, bought this card few months it does his job
Thanks Jay; I was looking for a guide tool on how to overclock my EVGA GTX 1080 FTW.
I think this should help me a lot..
I will lose my warranty if I OC my 1070...right?
no you wont
you will lose your warranty unless you got an EVGA card
+lenshire i think your statement is for disassambeling the card.i could be wrong, but im sure OC will not void your warranty.
you lose your warranty on some vendors if you touch your cards voltage. But some vendors still let you keep your warranty if card voltage was touched.
SkyDestroyerX EVGA is the only company that keeps up your warranty if you've overclocked your card. And yes, youre right, they also allow to change the original cooler without losing warranty.
Thanks man!!! I'm overclocking right now:) first time, so your videos are really helpful
You are a professor man. I learned so much from this.
this is a great tutorial for overclockers out there..thanx man!!!
Thank you very much for this very comprehensive guide.
I have a MSI Sea Hawk 1070, probably the non-X. I get 1974mhz stable out of the box and a 2013mhz max OC because the BIOS locks the power target at measly 105%. The card keeps hitting the power limit because, reference board!
If you're feeling like an outrageous overclocking adventure, I'd be hugely interested in watching a project where a BIOS flash attempt is involved!
EVGA GTX1080 FE - +250MHz Core, +350MHz Memory before I stopped trying. Thanks for the video, very informative.
So... I followed this and got an extra 50MHz out of my card! 2100 baby! This was so good. Thanks Jay!
Managed to get my Gigabyte 1060 up to 2025Mhz stable. It keeps power throttling, hitting 2050 (or just higher) and then dropping back to 2025. Was only able to get +175 boost on the memory. Any higher and it would crash. Not thrilled about upper 80s temps, but it isnt breaking 90.
Thanks Jay!
Thanks for the video. Ahhh the good ole days... (Before the fame)
MSI GTX 1060 Armor 3gb and OC to 2144MHz and memory at 4404MHz. I haven't had the time to find the max OC but I'm happy with where it is for now.
MSI 1060 6GB
bought used $270
GPU Core Oc'ed to 2138MHz
MEM Oc'ed to 1210Mhz
Default Core MAX 1806MHz
Default Mem 8100MHz
Running Heaven for half hour stable
Settings Power 108%, GPU off set +175, Mem off set +605
Stock Voltage, Stock cooling, Stock fan curve MAX temp 65C
Notes: I replaced the thermal paste with Arctic Silver. And I'm running on an MSI 970 Gaming board, AMD FX 8370E OC'd to 4.4, 16GB Mushkin ram also oc'd with tightened timings.
I built this slow saving piece by piece used refurbished everything except the SSD and HDD.
Good luck to the rest of you with your OC.
Thank you for your teaching. It is exactly what I was looking for!
3:20 I like this guy „We want more power“
MSI GTX 1060 Gaming x 6GB
Valley Benchmark-2560x1440 8xAA Full-Ultra
Pre-OC:
FPS: 41.1
Score: 1718
Min/Max FPS: 21.6/82.6
Post OC:
FPS: 49.2
Score: 2057
Min/Max FPS: 27.9/97.9
I should add that I ended up using Afterburner.
Pre OC clock-1945 MHz(+0)
Pre-OC Mem-4008(+0)
Stable OC clock-2164 MHz(+210)
Stable OC Mem-4927(+915)
Voltage set to 100(1.044v)
I don't OC at all, but theses are still fun to watch !
JayZ, EVGA's Precision OC does not work with the Titan X Pascal. EVGA knows about this and stated that since the Titan X is not manufactured and sold by them, Precision X was not coded to work with it.
I"VE WAITED FOREVER FOR THIS! MY BODY IS READY :^)
G1 GAMING GTX 1060 6GB 2135mhz max clock and 4404 mhz memory. Pretty satisfied!!
2139ish-mhz on gigabyte G1 Gaming 1080's! +450mhz on mem. Thanks Jay, you rock dude!!!
My gigabyte windforce oc edition 1060 6gb card maxes out at +771 on mem clock 👌 onlyon benchmarks though. For games, +700 only or games crash. I can play the division 2 on ultra settings at 90-100 fps. Not bad!
@@thijsdeclerck5775 yea, i have corsair vengence pro 3200mhz rgb 4x8 gb maybe that makes a difference?
nicely explained mate :) im one of the lucky EVGA FE 180ti users, it will happily sit in excess of 2100 on the core using the options you explained.
Thanks for this video! I finally just got around to using it to over clock my asus 1080. I'm pretty new to over clocking but I've managed to get my card running about 150 mghz over with the memory at about 490 mghz over. Running solid around 73C as well!
My MSI GeForce GTX 1070 Gaming X 8G overclocks like a beast.
My Current OC Settings:
Core Voltage: +50
Power Limit: 126%
Temp.Limit: 92c
Core Clock: +165 (= 2088MHz stable)
Memory Clock: +500 (= 4498MHz)
Fan Speed: Custom fan curve
Same MSI GTX 1060 Gaming X 6G
Core Voltage: +0(default)
Power Limit: 108%
Temp.Limit: 92c
Core Clock +180 (=2126Mhz Stable)
Memory Clock +700 (=4705Mhz)
Fan Speed: Default
Temperature goes max. to 72c.
I have the GTX 1080 AMP Edition. I am running at 2048 MHz with the fan curve at 90% and my case fans at full. With this my temps are at staying within the late 70s. in Heaven Benchmark I am getting an average of 163 FPS on Ultra, with tessellation at the highest for all settings.
My MSI Armor OC gtx1070 does 2133 mhz 100% stable. The memory dies 4300mhz and it can probably do more but I don’t need it.
Sick card for $95 shipped/tax.
Nice Video, nice update for an old overclocker like me with a 680gtx und now a 1060gtx.. was a good refresh und lot of fun thx mate :)
Thanks for the video jay this tutorial made my life a lot easier
Thank you for the added knowledge, Jay!
GTX970 running plus 120 core clock and plus 300 memory clock. I kept it pretty modest IMO, but I hate running in to issues like BSOD's... Can't wait to pick up an 1080!
With MSI AB, I get this on my EVGA 1080 FTW Hybrid:
+120 Power
100% Voltage slider (recently could pull down to 40% without issue when F@H)
+100 core (maxes at 2126 and hits 45c max while gaming)
+450 VRAM (max 5454 aka 10,908)
EVGA 1060 SSC managed to get 2126 overclock which held at 2114 for two runs increasing FPS on heavenbench by 7.9% from factory, started playing with other settings and now the card maxes at 2100 no matter what. Will update if I can push it further.
*Edit: Managed to overclock to 2164 MHz and benched for about 5-10 minutes before the bench crashed. Dropped the card down to 2151 MHz and it holds at 2139 MHz.
Here's what I could get to with my Zotac 1070 AMPED edition:
Gpu clock: 2063
Memory clock: 4007
Temp: 63 C
Volts: 1.094
Fan speed locked at 85%, but I had to keep checking if they were running! They're so quiet!
Avg. FPS with the same bench and settings as him: 100 FPS
I can't believe I didn't know about that "prefer power" default setting in the nvidia control panel.