Hi. I bought thinkrider x5 a week ago. Even after calibration, it's too heavy to ride even at zero percent incline. I would like to know how to solve this problem. I correctly performed the entire calibration procedure in thinkrider tools application.
I bought X7 Pro. But I noticed that the flywheel gets very very tough after about 11 or 12 rotation. Then it gets light, then gets tough again after 11 to 12 rotation. It keeps repeating.
Hola mi x7 tiene problemas con el potenciómetro da valores que cambian cada segundo,he hablado con el técnico y no me da solución y ustedes de momento tampoco,si tengo que remplazar alguna pieza lo haré aún que está en garantía por favor necesito una solución es desesperante
@@thinkriderofficial3465 ya he conectado 10 veces con el y solo me ha contestado una vez,no hay manera que me de solución ni la marca ni el ingeniero y x7 está en garantía,incluso me he ofrecido a comprar las piezas que hagan falta pero no así me contestan
Llevo años siendo cliente vuestro he tenido tres rodillos vuestros y el material que compro siempre es el vuestro porque calidad precio es imbatible y la calidad es muy buena pero lo que me está pasando estoy empezando a perder confianza,recomendé a mis amigos que compraran el rodillo y cuatro de ellos compraron,espero que me resuelvan el problema
Hi, my thinkrider X7 stop working suddenly, my speed sensor was going to about 5km/hr and suddenly it went back to 0km/hr. thereafter it cannot detect any speed already. Tried to restart the whole thing and the same situation happen. Can you help to advise what I can do to make it working again, thank you
Hi. I bought thinkrider x5 a week ago. Even after calibration, it's too heavy to ride even at zero percent incline. I would like to know how to solve this problem. I correctly performed the entire calibration procedure in thinkrider tools application.
Hi. Have you solved this? Have the same problem too
@@johncarlojoyo9714 No. I returned and bought the X7
Where can I buy spare parts? I live in Thailand.
It's not available in Thailand at the moment
เสียที่อะไรครับ ถ้าเซนเซอร์เพี้ยนav ไม่ขึ้นเปลี่ยนแผ่นสติ๊กเกอร์ออกถ่ายเอกสารขาวดำและตัดแปะแทนที่อาการหายเลยถ้าตัวเซนเซอร์ไม่เสีย
How to stop the flywheel from spinning when removing the nut?
It's also not shown in the video, probably for the same reason.
With electric, powerful torque you can remove the nut even if it spins
Where can I get the replacement parts my speed and power not stable keep jumping 8-10 km/h different
Contact Email:service2@thinkrider.com
I bought X7 Pro. But I noticed that the flywheel gets very very tough after about 11 or 12 rotation. Then it gets light, then gets tough again after 11 to 12 rotation. It keeps repeating.
Hello, regarding this question, this is the email address of our engineer, you can contact him.
email：service2@thinkrider.com
nice to meet you.
Please tell me how to pull out the flywheel shaft.
I want to replace the bearing there.
there was some kind of creaking in the thinkrider x7 when I pedaled. What could it be?
Hello, please contact our engineer for this question，His email address is：service2@thinkrider.com
Same. Do you have a solution
can we buy the replaced parts from you since my trainer stopped working
What's wrong with your bike trainer
Hola mi x7 tiene problemas con el potenciómetro da valores que cambian cada segundo,he hablado con el técnico y no me da solución y ustedes de momento tampoco,si tengo que remplazar alguna pieza lo haré aún que está en garantía por favor necesito una solución es desesperante
Hello, I'm sorry for the trouble caused to you. Please contact our engineer for this problem.email：service2@thinkrider.com
@@thinkriderofficial3465 ya he conectado 10 veces con el y solo me ha contestado una vez,no hay manera que me de solución ni la marca ni el ingeniero y x7 está en garantía,incluso me he ofrecido a comprar las piezas que hagan falta pero no así me contestan
Llevo años siendo cliente vuestro he tenido tres rodillos vuestros y el material que compro siempre es el vuestro porque calidad precio es imbatible y la calidad es muy buena pero lo que me está pasando estoy empezando a perder confianza,recomendé a mis amigos que compraran el rodillo y cuatro de ellos compraron,espero que me resuelvan el problema
I have contacted the engineer for you
Hi, my thinkrider X7 stop working suddenly, my speed sensor was going to about 5km/hr and suddenly it went back to 0km/hr. thereafter it cannot detect any speed already. Tried to restart the whole thing and the same situation happen. Can you help to advise what I can do to make it working again, thank you
Hello, please contact our engineer,email: service2@thinkrider.com
My power is way down on my E5 even after a FW update and calibration. What's the issue?
Can you be more specific? I don't quite understand
@@thinkriderofficial3465 The power my unit is reporting is about 40% lower than on my other dual sided power source.
@@Philatlondon1 Could you please send a video to our engineer's email, with your question attached。email：service2@thinkrider.com
운동을 하다 보면 페달 저항이 없어집니다.
해결방법이 무엇이며, 부품을 구입하고싶습니다 어떻게 해야하나요?
X7 pro입니다
You can contact our engineer, thank you.email：service2@thinkrider.com
My problem with my x7 pro is the resistance it only gives 100watts.
Can you shoot a video and send it to our engineer's mailbox. email：service2@thinkrider.com
Now I can’t calibration speed.
Speed sensor cannot to 36km/h
Hello, could you shoot a video and send it to our engineer's email.email：service2@thinkrider.com