HTML-код
- Опубликовано: 13 сен 2024
- Remember to subscribe and click the Bell Icon to get notifications!
I unbox, assemble and test my new Eakins 1080p60 Auto Focus HDMI Microscope, which is using the Sony IMX290 sensor.
Eakins Autofocus Microscope: defs.link/?u=2...
Affiliate links: (Bookmark and buy using them)
Banggood: defs.link/?u=5...
Amazon Store: www.amazon.com...
Give this a Thumbs Up and share the video with your friends if you liked it.
Donate so I can make more videos for you, see links below, cheers:
Become a Patreon! defs.link/?u=f...
PayPal Donations: defs.link/?u=b...
Subscribe: defs.link/?u=f...
My 3D printed replacement test equipment parts on Thingiverse: defs.link/?u=0...
My website (well, one of them): www.TheDefpom.com
My Twitter: / thedefpom
I upload new videos at the same time each morning (NZ Time) at least 3 times a week, on Monday, Wednesday and Friday at a minimum, if possible I will also do a Live Stream on a Sunday morning, so watch out for those too.
#TheDefpom
#IFixStuff
#Electronics
#Repair
#Defpom
TheDefpom Merchandise: teespring.com/...
==========================================
Some Of My Electronics Tools (video and purchase links)
==========================================
Boonton
------
4220.
8210: defs.link/?u=e...
Fluke
------
8842A:
45: defs.link/?u=e...
343A: defs.link/?u=1...
5200A: defs.link/?u=a...
540B: defs.link/?u=0...
893A.
A90.
HP/Agilent/Keysight
------
4261A: defs.link/?u=0...
5005A.
5342A 18GHz: defs.link/?u=5...
6181B: defs.link/?u=b...
8012B: defs.link/?u=c...
8648B: defs.link/?u=d...
8901B: defs.link/?u=5...
DSOX1102G: defs.link/?u=a... defs.link/?u=1...
E3646A: defs.link/?u=1...
Marconi
------
2022D.
2955.
TF2103: defs.link/?u=6...
Rohde & Schwarz
------
SMY: defs.link/?u=9...
CMU200: defs.link/?u=8...
Polarad SPN: defs.link/?u=2...
Siglent
------
SDM3065X: defs.link/?u=1... defs.link/?u=1...
SDS2102 (hacked to 340MHz): defs.link/?u=1... defs.link/?u=1...
SPL-1008.
SDP1168X: defs.link/?u=1... defs.link/?u=1...
SDL1020X-E: defs.link/?u=a...
Other Equipment
------
KSGER T12 Soldering Iron: defs.link/?u=6... defs.link/?u=5c...
Quick 861DW: defs.link/?u=1... defs.link/?u=a...
S-993A: defs.link/?u=0... defs.link/?u=e...
EEVBlog BM235: defs.link/?u=1...
YR1030 Battery ESR: defs.link/?u=c...
Heathkit IT-12 Signal Tracer.
Racal Dana 1992: defs.link/?u=8...
Bird 43: defs.link/?u=4...
Sinadder 3: defs.link/?u=2...
Audio Control SA-3050A RTA: defs.link/?u=a...
Korad KA3305D: defs.link/?u=6...
PDVS2mini: defs.link/?u=8...
Valhalla 2703: defs.link/?u=0...
Feeltech FY6800: defs.link/?u=8... defs.link/?u=34...
Eakins Microscope: defs.link/?u=b... defs.link/?u=2...
Mustool G600: defs.link/?u=b... defs.link/?u=3...
Handheld Equipment
------
Uni-T UT210E: defs.link/?u=3... defs.link/?u=e...
DER DE-5000: defs.link/?u=0... defs.link/?u=1...
MK-328: defs.link/?u=0... defs.link/?u=7...
MESR-100: defs.link/?u=0... defs.link/?u=0...
ESR Meter: defs.link/?u=0...
HOPI: defs.link/?u=7...
PeakMeter PM6252: defs.link/?u=5...
HS1010: defs.link/?u=1...
Thermal Camera: defs.link/?u=2... defs.link/?u=4...
![MISSING: SLIM SHADY [Expanded Mourner’s Edition Trailer]](http://i.ytimg.com/vi/xh8qgHrOO1g/mqdefault.jpg)
Not bad setup at all. Should work great. That little stop ring you shown goes on the shaft first. Then the camera mount . The camera mount should rest on it. It has several purposes. One, if you are inspecting a board you can loosen the camera mount grub screw and swing the cam around. Second if the grub screw on the cam mount comes loose then the lens does not go smashing into the base or your work. Thanks for sharing.
Yes that was my conclusion too in the end, I have it fitted ender the mount for exactly that reason.
Bought the same camera but with autofocus, including the ring light. Arrived a few days ago. Assembled and now ready for use. Also didn’t have a clue where that ‘stop ring’ was supposed to go.
NICE Gear you step it up.....
Very nice tool
why did you link the whole internet in the description? it looks like a search engine
Im assuming you got the no U disk storage which is the 1 usb version right? Which means that is the IMX290? Is that one legit or a fake one?
👍❤Super ❤ 👍
Good
Great video, what lens are you getting next? We do cell repair and need at least 8 inches working distance.
Oxford Electronics - using a 0.35x on both the camera mount lens and the Barlow lens allows me to have the height at about 16” and use the full zoom, any closer means I cannot zoom all the way in, so plenty of working distance there for putting bits of equipment under it. I can get that height because I added a second vertical extension which isn’t shown in this video.
That looks just the job :-D
I would expect it to take a while to get the setup adjusted for ideal use.
That base needs some lead pouring into it, or concreate.
Reversing the base sounds very appealing :-D.
I liked the sudden pop pop unpack :-D
i would chuck the supplys in a box and do evil things to the pins lol.
Also add a plastic rocker switch on the box to turn the mains on to them all.
Your monitor needs to be at eyeline for easy viewing, just my opinion of cause.
zx8401ztv - I have the cables hanging from my lighting, so if I need to use the scope I just pop it on the desk and plug it in, not much hassle. I put the monitor towards the rear of my desk, close enough to see ok but far enough out the way to not be a hindrance when it’s not being used.
interesting video, I have also one of eakins cameras. but I have problem with white and colour balance settings -have you may be some experience how to solve this??
ey what you doing with a portuguese charger?
Does it have ok latency? And how much mp camera is that?
Can it shoot RAW/TIFF format photos?
How much sit
You opened a store in the description 😂 tons of links
sure a description store kkk
Greetings! I was tricked by the seller of the Eakins microscope - Eakins Microscope Store. There is no HDMI image, the sensor sent not a high-quality Sony IMX 290, but a cheap IMX 307. I would like to ask you to check the presence of + 5V on the 18 HDMI contact from the microscope.
Is + 5V supplied to pin 20 (VDD5) FE1.1S USB 2.0 HIGH SPEED 4-port HUB Controller? My FE1.1S controller has a №20 pin off the board.
Besides, check it out, please.
Is there +5V on pin 18 of the HDMI connector?
This microscope is outrageously expensive.
No... it isn't. its only $500 peanuts for what you get...
how to detect a fake imx290 eakins microscope? Are there any friends who have gained experience in this regard.
I haven’t seen anything around.
I have a fake. I can send you a picture, but you can't publish it here.
@@propretor4964 yes, jul, I would appreciate it if you could send me a picture, I assure you I will not send these pictures.
@@SERKAN_HOT34 Give me a mail address
open the camera 4 screws hold it to reveal sensor on the board you will find sensor version, I got conned by aliexpress eakins ordered imx290 when received opened it up turns out to be a cheap imx307 raised dispute still ongoing