Range Repair - Replacing the Control Board (Frigidaire Part # 316557205)
HTML-код
- Опубликовано: 21 окт 2024
- www.partselect.... Click here for more information on this part, installation instructions and more.
This particular Control Board is specific to GE manufactured brands including General Electric, Hotpoint, and Kenmore. To find a control board specific to your model, visit www.PartSelect.com.
If your range is having any of these symptoms, then replacing the control board could solve your appliance problem.
1) Little to no heat when baking
PartSelect Part Number: PS2378933
Frigidaire Part Number: 316557205
Tools used for this repair/replacement:
1) ¼ inch nut driver
2) Putty knife
3) Needle nose pliers
Get model-specific repair help from PartSelect.com. Learn how to troubleshoot, diagnose and repair your appliance with user-generated installation instructions, hundreds of step-by-step repair videos, and our Instant Repairman. If you've got an appliance problem, we can help www.partselect....
8 years later and this IS still helping. Thanks, Steve!
Steve!!! I am a single mom and this video saved me from buying a new stove! Your instructions were simple, easy to follow and concise. I couldn't have spent more than 20 mins tops completing this. I am forever thankful and you are a blessing!!! Christmas dinner, here I come!!
Thanks so much, Steve. Couldn't have done it without you! I'm feeling so accomplished.
Thank you so much for your videos. We were finally able to fix the Oven of our Frigidaire Range...after 3 weeks of doing without the oven function on our appliance. Easy to follow and I'm 58 years young, so if I can do it following your easy directions; others should have no problems. Again, thank you 😊🎉
Thankyou!!! 6 years later and this video is still helping people!! My only recommendation would be to unplug everything in the control unit before unscrewing and removing the old one. It makes removing the wires easier.
Thank you so very much!
My oven was not the same type as the one you repaired, however, by simply following your directions, I was able to replace my Oven Control Board Assembly after one appliance repair person basically "Took" me for well over $200.00 by replacing a part that was not even in need of repair. I researched my "Error Code/E-0A) on Samsung's website and it told me SPECIFICALLY what the problem was, which was that the stove was "Overheating" and the website told me exactly what I needed to fix the problem:
The Oven Temperature Sensor & Possibly the Control Board Assembly.
I ordered my parts from Amazon, and while waiting for 'another' repairman who "could not fit me into his schedule", I decided to look to RUclips for help. I viewed another gentlemen's RUclips video,.... but your's was so much simpler, and 'to the point'.
I just finished replacing my Control Board Assembly and My Oven IS WORKING FINE! GOD Bless YOU!
THANK YOU!
THANK YOU!
THANK YOU!
It worked! I couldn't bring myself to pay a repairman $120 for something that took appr 25 mins to do. This was straightforward & easy to complete. My late Dad taught me to change the oil in my old Honda Accord, & I've done some interesting "repairs" as a trucker, so I knew I could do this, too.
Thanks a million! (Don't forget to at least like the video if it helped you.)
Thanks man we fixed our stove tonight instead of sending it to a landfill full of more junk! It was only six years old and felt like that was way too soon to die. Thank you.
I used this video to fix my stove with a used part I ordered on ebay.
it works great now. it wasn't that difficult, but I'm glad I had this video to help me feel more comfortable with the repair.
Kudos to you, Sir.
Steady Ashegoes was it preventing your oven from coming on?
The display panel on our Frigidaire range kept slipping down. We didn’t need to replace anything and the video was perfect for carefully removing the panel and reattaching it. Thank you. We can now do this without an expensive home visit from the appliance repair people. (And truthfully, the last guy didn’t know how to fix it)
Easy peasy with your great instructions. I also appreciated the tip about the overlay. I took a photo of the wires before unplugging them just to make sure I put them in the right spot on the new control board. Thanks!
Nancy McMurrray do you know if this works with all models including Tappan? I can’t find the model # and I have looked everywhere.
This video saved me at least $100, maybe even $200. I was getting an F11 code after I started melting the touchpad trying to deep fry chicken in a rectangular chafing dish water pan too on the left two burners of my Frigidaire Gallery stove but too close to the back of it, forcing intense heat up toward the touchpad. The door lock button was stuck to the relay under it, making everything on the touchpad unusable except the oven light, generating an F11 beeping that would not stop. I was able to unstick the label from the relay pad under it with a dessert spatula, and after putting a thin piece of stick-on velcro under there, was able to prevent the slightly warped label from making connection. I may not be able to lock my oven door anymore, but I don't have young kids and now I can use my stove again. Thank you so much, some other guys on here suggest giving a gratuity, I wouldn't be averse to it :^)
Many thanks for this detailed video. I especially appreciated the tip about removing the old overlay and placing it on the new control panel, as these overlays are not cheap!
This tutorial was exactly what I needed to repair our range. You made it simple and easy to follow. Thank you!!!
Thank you so much Steve!! With your perfect guidance My 15 yr old son and I were able to replace this part ourselves and save the money on the repairman bill!! I am now subscribed to your channel for all future issues!!
It was spot on and now my oven works for the holidays!
Thank you Steve I did everything right and I fixed it you are my new best friend 🤣🤣🤣
Steve I love your videos. Have you made one yet with the frigidaire oven that is a air fry mode. The one with the controls in the front. I need to replace the control for the front left burner
Thanks was able to swap my unit out using this video. I used a small flat screw driver to help get the white connector off as it was on very tight.
Thank you so very much. Your video was detailed and to the point. I was able to successfully change the panel on my own with your help. Thus, saving me money and building my confidence! 😊
Thanks Steve!! This video was a BIG help. It saved me from buying a new stove. Now I will be able to use that money to buy a new recliner instead. Go Cleve Cavaliers!! Thanks again Steve!
Your very welcome.
16,000+ people watched this (ish). 32 people liked it. Manners, people! Thanks, this really helped me.
Excellent instruction video. I hope the repairs are similar on my Maytag
Hi. Any videos on how to remove it from the control housing? Any suggestions on cleaning the terminals as well?
Thank you Steve! Broke on Monday and fixed by Wednesday.
Any chance of a video on replacing the suppessor on a Jenn air electric induction range? I got the part from PartSelect but you sent the control board video.
Thank You very much. I couldn't find the exact part that I needed online. My control panel still worked, but the parts where the screws go in, broke into pieces on one side. Cheap plastic garbage. Luckily enough of the plastic was still attached for me to take the two screws out, put washers on them and screw them in tight, holding the controller tight. It was great to know that I needed to get my 1/4 inch drive before starting though! I also had the screws fall out of one of the front knobs last year. I put them back on and it's been good, but it's disappointing to see this stove falling apart like this. It should last a lot longer..
Very helpful and covered everything I was worried about, including how to salvage the overlay. Thank you!
s set aS22ssss998
I've replaced the control board on an FGEF3032MFD twice and the first control board didn't even display the clock unless I turned one of the range knobs on. The range nor the oven worked. The second control board did nothing so I'm assuming there is another part that needs to be replaced as the power checks out to the appliance. Any help would be greatly appreciated.
This video was very helpful and instructions were very easy to follow thank you.
Thank you. Such a gentleman and easy instructions.
How do you check the terminals for arcing? Thank you
Thanks for the video. Very easy to follow and a big help.
How much does this board cost for 2014 stove
Hi Steve, thanks for sharing, much appreciated. I just purchased Frigidaire range CFEF3016USB and in directly run in to the operational problem. To cook chapati\Indian breads, I use Tawa\hot plate kind of. My problem is that my stove have auto cut and coil goes off after reaching at certain heat level. This auto cut is at Hi and Medium both or I guess at all levels. Once auto-cut is mode is on, it doesn’t comeback easily, I have to wait for unlimited time or switch to another coil. This is very frustrating and wasting my energy as well. I want to remove the auto cut thing, is it possible if yes then kindly let me know how?
Hello PartSelect,
Our family also has the Frigidaire GLEFZ379FC model. The problem is that when we turn the switch towards large element on the right front surface unit, only the outer part of the stove heats up but the inner part doesn't. Do you know how to fix this problem? If so, please tell us as soon as possible.
Thank you sir, your video really helped me fix my oven
Just replaced my control panel, have to press the clock button to operate the oven,
all wires were replaced properly. Any suggestions? Thanks
What is your model number and what is the part number that you replaced?
I just need to replace one wire that's in one of those white things. Can I just pull it out?
My Stove made a loud popping noise like a firecracker when it was in use. We switched it over to broil from the bake option when it popped. Now the control board does not work, but the stove tops are still working properly. Would simply replacing the control board fix the issue? Or would there be a fuse that also needs replacing?
model # FEF380MXDCB
serial# VF42522723
control board# 316207509
Hi Albert, I would suggest checking your bake element for damaged.
Thanks, Steve. I just scored some brownie points with my wife ( maybe she'll bake me some brownies) !
Hi. I have a Electrolux EW30IS6CJSB and I get E15 error code. Do you think replacing the motherboard would resolve it?
Thank you so much...we now have a working oven!
We have a Frigidaire model # PGLEF385-CS2. When the oven is put on Convection, and you open the door the oven kicks off the goes to display PF.wondering if you have encountered this before and what could be causing it.
Would you be able to show me how to change the control board WP9761594 for Kitchenaid stove KGRA806PSS02?
Great video, very accurate. I had a different part but the concept was the same Thank you. Now he wants Baked Alaska and being it has been 2 week without my oven he can have anything he wants:) just took a leg of lamb out of the freezer I am a happy
woman :)
Awesome instruction videos - thanks for uploading!
Hi, I can't seem to wiggle out the large connected piece with wires. I feel like I've tried everything. Any tips?
Of course, after I ask. I finally got it! I used the pillar nose to push it up from the narrow end.
Please help! My Frigidaire walloven had error code which indicated a faulty control board! I made a picture of the wiring but lost it. Who can tell me what color goes to bake-broil-L1, L2 OUT and L2 IN ( yellow, bleu, black, brown and red) Thanks guys!
esas cocinas electricas se pueden poner a funcionar sin la tarjeta y como
My fridgedaire gallery oven is 5.5 years old. The stovetop works fine but the oven is not working at the correct temperature, so it's not cooking food correctly. Model # is FGEF3042KFG. Can you help me please to figure out what is wrong???
Hi Beverly, I have researched your model and for your symptom I would suggest checking your oven probe - over time this can become weak and might be sending the wrong temperature signal. If you notice that your oven is not producing enough heat, it could be because the sensor has failed. This part is located at the back of the oven, and is held in place by a few screws and a wire harness. Another reason could be that the control board has failed.
all of the settings on the oven don't work
My trouble is the oven heating element comes on high and wont go off
thanks so much very clear and informative great help
Og double og thanks for the knowledge..!!!🙇🏽♂️👍
Hi where I can bay the part
You can find this part on our website here: www.partselect.com/PS2378933-Frigidaire-316557205-Electronic-Control-Board.htm?SourceCode=3&SearchTerm=316557205
Good luck with your repair!
HELP!!!! my stove is stuck in lock my oven would not work. the control would not work.. I get an -SE- on the screen. does this mean I need to replace the control board????
Hi Millie, what is your model number and I can research this for you?
PartSelect I dont have one..my landlafy got it use..thank you anyway.
This worked perfectly for my Kenmore range 790.91072601
and control board 316455420. It took me a 1/2 hour with no previous experience. I ordered an OEM part from Amazon that was much cheaper than what was quoted by my repair person.
Can you tell me what model is the range ?
We no longer have that range, but our records show that it was model CGLEF379DCE.
☘ Irish Honey Badger - Thanks for help, electronic board beeps while oven doesn't work.
Is it possible to just replace my relays?
Hi, do you mean the over lay on the control board? Please provide your model number.
No, there is two relays, one is for the broil and the other is for the bake element. I think they are soldered to the control board... is there an easy and efficient way to replace them? My model is a Frigidaire CGEF3055KFF. Thanks!
Hello, I have checked your model number and you would need to replace the board itself. The manufacture doesn't have individual parts listed for the relays only.
What might this cost me to have a repair man fix it?
150 to 200
ok bueno ese video my board esta blokeada no enciende el horno se puede desblokear o repara la board
Hola, ¿podría proporcionarnos su número de modelo y nuestro equipo estará encantado de investigarlo por usted?
ok saludos FRIGIDAYRE MODELO´FES-365 ECG 220 voltios PERO ahora tratando de desblokearla sufrio un corto y daño el transformador de la placa y el transfor no dice si es de 220 o 110 para reemplazarlo si tiene alguna imformacion se lo agradeceria en venezuela no se consiguen esas placas o si se puede poner a funcional directa sin la placa ok saludos
I think i could handle this if i could find the part for my really really old stove .but i am going to call the home warinety people first and have them do it!..thank you
Replacing the control board on a frigidaire stove keeps on beeping
What is your model number?
PartSelect Model Number is VF50905619 AND THE SCREEN IS SHOWING F31
PartSelect sorry I gave you the serial NUMBER before. The Model Nunber is FFLF3047LSD
That code would indicate a faulty RTD temp sensor or possibly a defective electronic control. The resistance of the sensor should be about 1050 ohms at room temperature. Check the wire harness connection at the sensor and at the electronic control as well.
PartSelect I changed the sensor. And it still showing F31