For the pieces that go in to the lid you can use 2 tyre Schrader valves they work great they have grooves on the rubber that will make a nice seal on the lid then just remove the inside of the one valve for the smoke to come out and the hose. Can fit on there
Mineral spirits or commercial fog juice for smoke machines (same thing, just in bigger quantity). You can get the fog juice at anyplace that sells DJ equipment or a Halloween store.
you'll save yourself a lot of headache if you go pull a couple old tubes out of the trash of your local motorcycle shop, motorcycle tubes have steel threaded inlets with nuts that can be used to tightly secure all your air intake and exhaust to the jar lid, just add a the appropriate sized metal washer and cut a rubber sealing washer from the the inner tube you just removed the threaded air inlet from. no lathe of waiting for glues to set, you can build the whole thing in minutes and it will be way better then using plastic pen body's and caps........
I’m trying to do this right now and no smoke is being made the soldering iron is red hot inside the glass container. Could my jar be too big, what could be the problem?
We have found a lot of leaks with the first one we made. Cheap Soldering iron with the plastic in front works a lot better. The bicycle pump gives a lot of control so you can give a good pump and watch as you’re pumping. I also like the glass, you can see when you have enough smoke to give a pump. If you try it let me know how it works. And if there’s any improvements let me know👍
Most of the videos like this one are prepared in advance so that nothing goes wrong. Cheap soldering irons don't reach the temperature that mineral spirits combust. Most of these videos are bogus but give it a shot if you got nothing else going on. You'd have a better results if you took a Monster Bong Rip & blew it down the line. But remember to look for the leak. Don't space out & forget. You could also use a bottle of Map gas & have your buddy flick his lighter at the connections(not the tank or gas cap that would be a Dick Move). Be Safe. Don't attempt the Map gas procedure. Bad joke? Ya it was.
For the pieces that go in to the lid you can use 2 tyre Schrader valves they work great they have grooves on the rubber that will make a nice seal on the lid then just remove the inside of the one valve for the smoke to come out and the hose. Can fit on there
Awesome video!
Great idea with a coffee heater!
Get a little tiny harbor freight 12v electric pump (10 bucks) super good video
Great Video.. BTW where on the manifold is it best to connect it.
GOT-DAMN MacGyver! A transfer pump, a thin cigar and a lighter; >$10!
Too perfect... who has all those machines?
What do u use for fuel in your smoke machine..mine doesn't produce much with baby oil or lamp oil
Mineral spirits or commercial fog juice for smoke machines (same thing, just in bigger quantity).
You can get the fog juice at anyplace that sells DJ equipment or a Halloween store.
What was the contents in the jar that would create smoke? Looks like a rag of some sorts. What else?
you'll save yourself a lot of headache if you go pull a couple old tubes out of the trash of your local motorcycle shop, motorcycle tubes have steel threaded inlets with nuts that can be used to tightly secure all your air intake and exhaust to the jar lid, just add a the appropriate sized metal washer and cut a rubber sealing washer from the the inner tube you just removed the threaded air inlet from. no lathe of waiting for glues to set, you can build the whole thing in minutes and it will be way better then using plastic pen body's and caps........
Being unfamiliar with these types of tubes what do they connect to on a motorcycle so I can ask a shop if the have trashed any.
Why not just drill a hole and put a valve stem in it
This looks like a passat? or a 1.8t engine. where did you put the hose to the smoke machine to test?
Good video thanks!
Thanks for sharing
I’m trying to do this right now and no smoke is being made the soldering iron is red hot inside the glass container. Could my jar be too big, what could be the problem?
How did you fix it
I'm going to try this out , thank you
We have found a lot of leaks with the first one we made. Cheap Soldering iron with the plastic in front works a lot better. The bicycle pump gives a lot of control so you can give a good pump and watch as you’re pumping. I also like the glass, you can see when you have enough smoke to give a pump. If you try it let me know how it works. And if there’s any improvements let me know👍
Does this produce . 2 psi
Most of the videos like this one are prepared in advance so that nothing goes wrong. Cheap soldering irons don't reach the temperature that mineral spirits combust. Most of these videos are bogus but give it a shot if you got nothing else going on. You'd have a better results if you took a Monster Bong Rip & blew it down the line. But remember to look for the leak. Don't space out & forget. You could also use a bottle of Map gas & have your buddy flick his lighter at the connections(not the tank or gas cap that would be a Dick Move). Be Safe. Don't attempt the Map gas procedure. Bad joke? Ya it was.
Yeah what’s a good way to get it hot enough since soldering iron doesn’t work
@@aqib2000 Ele não sabe , porque quem sabe faz , quem não sabe critica .
nice smoke machine .just need a bit of cleaning under the nails
Watch your Bic pen liquefy before you get any smoke going.