Just failed a SMOG TEST in Cali with an 0456, 0457 small leak codes. Mechanic wants $165 just to do the diagnostic test, a smoke test. There are a lot of smoke generators on youtube, but yours is, by far, the most professional. Thank you for sharing your knowledge and experience with the public.
This thing worked like a charm. Located my EVAP leak in less than a minute once I got it hooked up. I was contemplating buying a $100 part in hopes it would fix my problem. After hooking this up and finding my leak I was glad to see it wasn’t the part I was going to buy but instead a $10 water separator. This thing saved me a ton of time and money.
Building one today, chasing vacuum leaks on an old Porsche that I've been fighting vacuum leaks on for a couple of years now. Thank you for posting this!
Thank you for an easy to follow video, with a list of parts! My son and I built this today and tested the snorkels of his ATV. Found 3 leaks, fixed quick and ready to ride!!!
The only channel I watch religiously, was bummed about the weather how it affected you's glad to see you all are well and the videos are flowing like normal.
I would buy one it even though it only cost $25 to make and every one seems to improve on the last one - I can't wait to see whats next - its brilliant
Azteca Hernandez Can you please make a video? Take us inside the store with you and show us the aisles where you found all the parts and afterwards show us how to put it together. I would greatly appreciate it if you can provide that help.
The most obvious reason I found is to make sure your oil level isn't too low. Sucker gets hot without enough oil on the wick and it does dissipate quickly.
@@HedoBum It would be pretty easy to make a sight glass for monitoring the oil level, especially on the taller version of the Mr. Fusion. It might be a worthy addition if you're worried about that.
@@BREW2LFOXBODY Man I appreciate the time you put into everything you put out! Im so glad that yall made out alright in the storms and that I can continue to watch your videos like they are cut out clips from behind the scenes of smokey and the bandit lmao! Your cars hold the same status as Eleanor, or any other movie car in my opinion brew2l! This video is really neat too lol! Stuff I would have never thought up lol!
Thank you 🙏 that’s really cool of you to say! My cars aren’t anything special for sure but I love sharing their progress with you guys! We all get to grow together!😎
@@BREW2LFOXBODY i appreciate it and Im sure a lot of others do as well man. I like your cars and love seeing them brow. Be safe brother and Ill see you in another comment section lol..
Thanks. Just put it together. Works awesome. Finding the wire was the biggest challenge. Just looking for a recommendation to put on nut and screw so it don't melt pvc body
Nice design mate. I made a similar design but using a cheap soldering iron as a heater. After the first use it failed. Ill now make one with nichrome wire like yours.
New subscriber here. I've seen videos in the past of people making their own smoke tester. Your's is the best and easiest by far. It never crossed my mind to use plastic plumbing and run voltage through it. It just seems counter intuitive but you proved me wrong since it's very hard plastic and very little voltage running through it. I'm running to Lowes tomorrow and to my local vape shop.
So basic, cheap, and usable. I made my own from scratch that looks like a professional one. But this little guy is SICK AF! Excellent video, Excellent job!!!!
Just a add on to this set up is adding a propane regulator they'll drop your air compressor PSI to a safe 1 psi because a lot of systems will get messed up with anything over 2psi
@@johngonzalez1193 funny cuz I did a search on Amazon and got a slew of results. Then I went to harbor freight online and did a search there and there were 11 pressure regulators.
Ok #1) I was going to build a paint can smoke machine (as I've already got all the parts), but I really like this idea! #2) I really want to buy a fox body mustang! Damn I love the look and sound of the 5.0!
BREW2L How are you doing! I went to Lowe’s today to go find all the parts on your video receipt and I found all the parts. After I found all the parts I went back to the pvc plumbing section cause I realized I grabbed the wrong Flange and in the process of doing that a worker asks me if I need help with anything and I told him what I was going to do with all the parts from your receipt and he said that it would all melt in seconds because pvc can’t tolerate heat, I ended up putting all the parts back and not buying anything because I don’t have knowledge about this project like you do, if you can please make another video regarding this matter talking about what a wick or heat of any kind can do to pvc I would greatly appreciate it. Thank you! :)
Perfect! I was just thinking about how cristal jars or metal cans are not the best containers, this one looks great. Maybe as an addon, a hook to hang it off the hood. Kudos for the music :)
I work on Foxbodies all the time, and I have been using a smoke machine and love it. Unfortunately, they cost like $800 so I wasn't going to get one anytime soon, but I will be building this. Thank you for all of your useful information.
Wow that is cool, and I hope all is well after the storm. You're right nothing sounds better than a push rod V8. That is a cool project thanks for the info.
Thanks for the vid. Made myself one today out of ABS. One thing I did do differently was using some liquid tape on the bolts (outside of plastic) so if it slid for some reason it couldn't ground out the to body or engine. I know there is a fuse in there also to protect against that but I figured it wouldn't hurt and I already owned the liquid tape.
Good video. I added a shutoff valve, 0.5 PSI propane regulator (CAMCO Olympian 59013 from Amazon) and ring end 12VDC power cables with battery clamps. Made power through-bolt seals from high-temp silicon rubber. Mine leaked smoke from around the cap, which I resolved by smearing the threads with plumbers putty and reinstalling.
So 0.5 PSI is the input pressure? Would it work with no input air, maybe just plugging the input? I wonder if it would build enough pressure on it's own?
@@timtucker7762 0.5 psi was recommended in several different build videos, etc. to not overpressure the car hoses. It seemed to work so I went with it vs. reinventing the wheel. No idea if it's optimal. Smoke does dribble out on it's own without pressure, but IMO pressurization is better to speed the process. I fed a 12V plug-in pool toy inflator nozzle into the pressure regulator. I've even seen designs where people pressurize by blowing into the hose.
Thats a pretty good idea. When I made mine a long time ago. I just used a glass jar and an incense. Yes an incense. One of those little triangle thing that smokes. I also used the long incense on a stick too. The best part is that it smells good. Mine requires no battery or bicycle pump.
Thanks for taking the time to do this video! glad your all safe after the storm, well now I have a weekend project, this will also help me to check for leaks on the turbo pluming on my Super duty diesel
I second that this is the best channel on RUclips hands down glad to see things are ok with you and the family after the hurricane but small question my clutch cable in my 1993 fox keep splitting this will be cable number 3 waiting on it now to come through Fedex it has a stage 3 clutch a friend told me it can be the fork but not sure
Thanks brother 👍 more than likely it’s the cables you are using. The aftermarket adjustable cables suck. Try a factory cable and see if that fixes the problem 💯
Dario Chase where is the cable breaking? Under the dash by the quadrant or somewhere else? Maximum Motorsports makes a great cable and quadrant. I was having the same problem years ago and finally bought the MM cable, haven’t had a problem since and that was 5 years ago daily driven.
Great idea. You also could use a mosquito fogger machine ($50 from Amazon Prime) and pour baby oil in it. It works like a charming. It harmless to engines.
That's originally what I googled when I found this.... a DIY way to adapt a Halloween smoker for automotive use. Being a vaper and tinkerer, only thing I need is $18 bucks worth of PVC. Wonder if Domestic/Import have a flavor preference :D
I just built one. I wanted add that you need to twist two pieces of the 26 gauge wire together as that will make a difference to what ohms people see. But thank you for the video.
Your right about the BCam sounds great ,great videos, i try to add a comment in your b-cam install video but they are turned off, my question is when you installed your b-cam did you change your stock valve springs?
Love your content brotha I messaged your fb page but never got an answer for a question I had but I bet you get a ton of messages on there so I def wouldn’t hold that against you at all brotha love your content keep all the great info coming I am really learning a ton about my car that I didn’t know thanks again
Made my own worked well aside from being unable to find coil wire. Any suggestions on alternatives? I ended up using an old soldering iron in place of the wire works well but not very portable.
I built this yesterday, but I had to order the resistance wire. I tried using mig wire, but count get the right resistance. Did you just use one strand of the 26 gauge stainless wire or was it doubled up?
Thanks for this “Mr. Fusion” build! I just finished piecing mine together, looks identical to your mini fusion. The hardest part was waiting on the 26 gauge wire from amazon, since no one in town kept it in stock. Keep up the good work!
we took a strip of paper 1 1 /2 wide and the diameter of the pipe, then divided it into 4 marks, , wrapped the paper around the pipe then used those marks to locate the holes
What a great little build. I will have to make one of these! Since it is made out of plastic, does the plastic get soft where the power screws come in? Thanks, Tom
thank you sooo much for the idea, I have been using air pressure and a soap test to find a leak, but this is so much better and very inexpensive, half the stuff I had around the house, very good video, can I ask you something ? what is with the music ??? On some videos you can't even hear what is being said
awesome info.. came here from martinbuilt who built one of these using your design and gave you a shoutout.. about to build me one to be able to smoke exhausts for leaks. thanks for the video.. btw, where you from? heard you mention hurricane cleanup. im on the MS gulf coast.
@@BREW2LFOXBODY Building one myself. Got most of the parts. Do I need an air compressor? (Don't have the space for one honestly. Living in an apartment.) Also, for the hose copper tip, what type of part did you use? I noticed you covered the parts list for the ones on the unit, but not for the hose. Or am I just not looking at the parts list thoroughly enough?
@@javaidsadiq5775 I just used a double sided fitting that looks similar to the ones used for the tubing/air compressor on the actual machine. You should be able to find it in the same section in Lowe's if I remember. Basically any fitting that looks similar to the ones used on the machine will do. As long as it fits the tubing. Just look at the fittings in the air compressor section. You'll find one that will suit your needs.
Start the focking engine dumbo! Battery wont drain then thick shit! Or if the car you're testing it on wont start then use another car that runs to connect to that battery!
Sir,in the previous video,you have mentioned to close the throttle body, do we have to do this in diesel engine as well?if so which part to be closed,your video or amazing
LOL! That's pretty darned ingenious, thanks for sharing the design and assembly BREW2L! I'm going to build it, even if I never need it, I'm going to have one...
Honestly as long as you keep the wick wet and keep air blowing across the wick it should last for a very long time, worst case scenario you would just have to re-wrap the coil again. 👍
Best. darn. channel. on. RUclips.....Period!
I’m not sure about that.... but this comment deserves a pin 💯👍 thanks brother 😎
ya it's really good
Can’t lie it is Ford should pay you all my friends wants foxes now
T Web wow times we living in
LOL Love it!
Just failed a SMOG TEST in Cali with an 0456, 0457 small leak codes. Mechanic wants $165 just to do the diagnostic test, a smoke test. There are a lot of smoke generators on youtube, but yours is, by far, the most professional. Thank you for sharing your knowledge and experience with the public.
CA makes old fox mustangs need to pass smog? Wtf
This thing worked like a charm. Located my EVAP leak in less than a minute once I got it hooked up. I was contemplating buying a $100 part in hopes it would fix my problem. After hooking this up and finding my leak I was glad to see it wasn’t the part I was going to buy but instead a $10 water separator. This thing saved me a ton of time and money.
Building one today, chasing vacuum leaks on an old Porsche that I've been fighting vacuum leaks on for a couple of years now. Thank you for posting this!
I have not idea how I found your video, but this is amazing. I spent the whole day just typing "smoke testers" keep it up. Thanks
how is probley that it was right when U stopped tryng👋😑
this by far the best diy smoke machine i've seen on youtube... thanks
Awesome!!!! I have a vacuum leak on my 85 LX I just picked up. I was told you made a cool kit and low and behold this popped up in my suggested vids 👌
Thank you for an easy to follow video, with a list of parts! My son and I built this today and tested the snorkels of his ATV. Found 3 leaks, fixed quick and ready to ride!!!
You got my subscription when you included the rumbly idle clip. Now for the rest of the video.
The only channel I watch religiously, was bummed about the weather how it affected you's glad to see you all are well and the videos are flowing like normal.
Thank you! I’m trying to get back on track for sure. 🙏
I would buy one it even though it only cost $25 to make and every one seems to improve on the last one - I can't wait to see whats next - its brilliant
Thanks 🙌
The best EVAP smoke machine ever , thanks for sharing 👍
Making me one just bought all the parts. Now lets put this humpty dumty together. Thankx for this design looks Awesome.
Azteca Hernandez Can you please make a video? Take us inside the store with you and show us the aisles where you found all the parts and afterwards show us how to put it together. I would greatly appreciate it if you can provide that help.
This is the best one i've seen yet. sure you can't see the "Smoke" through a glass screen but why would you need too. Good job!
The most obvious reason I found is to make sure your oil level isn't too low. Sucker gets hot without enough oil on the wick and it does dissipate quickly.
@@HedoBum It would be pretty easy to make a sight glass for monitoring the oil level, especially on the taller version of the Mr. Fusion. It might be a worthy addition if you're worried about that.
Best channel and best audio of any other channel out there! Thanks for this brother!
I appreciate that Bro 😎🤟🔥🔥
@@BREW2LFOXBODY Man I appreciate the time you put into everything you put out! Im so glad that yall made out alright in the storms and that I can continue to watch your videos like they are cut out clips from behind the scenes of smokey and the bandit lmao! Your cars hold the same status as Eleanor, or any other movie car in my opinion brew2l! This video is really neat too lol! Stuff I would have never thought up lol!
Thank you 🙏 that’s really cool of you to say! My cars aren’t anything special for sure but I love sharing their progress with you guys! We all get to grow together!😎
@@BREW2LFOXBODY i appreciate it and Im sure a lot of others do as well man. I like your cars and love seeing them brow. Be safe brother and Ill see you in another comment section lol..
Awesome build! Somewhere I missed what you used to push the smoke out.! I see a hose that looks like from and air compressor.
Thanks. Just put it together. Works awesome. Finding the wire was the biggest challenge. Just looking for a recommendation to put on nut and screw so it don't melt pvc body
This is going to save me a lot of time and money thanks again for the informational videos.
Nice design mate.
I made a similar design but using a cheap soldering iron as a heater. After the first use it failed.
Ill now make one with nichrome wire like yours.
I was just saying I wanted one of those. Never dreamed it was that easy to make! Thanks for taking the time to put this video together!!!
Building mine right now today awesome thanks for all of the tips great video
New subscriber here. I've seen videos in the past of people making their own smoke tester. Your's is the best and easiest by far. It never crossed my mind to use plastic plumbing and run voltage through it. It just seems counter intuitive but you proved me wrong since it's very hard plastic and very little voltage running through it. I'm running to Lowes tomorrow and to my local vape shop.
So basic, cheap, and usable.
I made my own from scratch that looks like a professional one. But this little guy is SICK AF!
Excellent video, Excellent job!!!!
Just a add on to this set up is adding a propane regulator they'll drop your air compressor PSI to a safe 1 psi because a lot of systems will get messed up with anything over 2psi
Jeremy,
Please post a link to the propane regulator you use.
Thanx!
Link?
No one needs to add a link. Just simply do a search. Spoon fed.
@@Roller76 couldn't find anything
@@johngonzalez1193 funny cuz I did a search on Amazon and got a slew of results. Then I went to harbor freight online and did a search there and there were 11 pressure regulators.
Ok #1) I was going to build a paint can smoke machine (as I've already got all the parts), but I really like this idea!
#2) I really want to buy a fox body mustang! Damn I love the look and sound of the 5.0!
Made my own today. Same build except I call mine Mr. Wok because it runs on vegetable oil! Thanks brew2l
I added an extra valve so I can monitor pressure while injecting smoke. Works great.
BREW2L How are you doing! I went to Lowe’s today to go find all the parts on your video receipt and I found all the parts. After I found all the parts I went back to the pvc plumbing section cause I realized I grabbed the wrong Flange and in the process of doing that a worker asks me if I need help with anything and I told him what I was going to do with all the parts from your receipt and he said that it would all melt in seconds because pvc can’t tolerate heat, I ended up putting all the parts back and not buying anything because I don’t have knowledge about this project like you do, if you can please make another video regarding this matter talking about what a wick or heat of any kind can do to pvc I would greatly appreciate it. Thank you! :)
Perfect! I was just thinking about how cristal jars or metal cans are not the best containers, this one looks great. Maybe as an addon, a hook to hang it off the hood. Kudos for the music :)
I work on Foxbodies all the time, and I have been using a smoke machine and love it. Unfortunately, they cost like $800 so I wasn't going to get one anytime soon, but I will be building this. Thank you for all of your useful information.
Your welcome brother! Thank you 🙏
I just got done building my own mr. fusion. Works flawlessly, thanks man
I can't find the wire
I dont see it on there now either.
Great Video. Now I have a good project for the weekend - and can test for vacuum leaks on my vehicles. Thank You!
I'm going to build one .. I'm chasing a surge on my wife's 88 lx ... watch from new Brunswick Canada eh !! Great station man !!
Wow that is cool, and I hope all is well after the storm. You're right nothing sounds better than a push rod V8. That is a cool project thanks for the info.
Thanks man, we are doing fine thanks for asking!
You the man B! Thanks for sharing this...I'm definitely building a Mr. Fusion.
I appreciate all you do for us Fox Bros!!
You guys are more than welcome! Thank you all for the support and love you give the channel 💯💯💯
Thanks for the vid. Made myself one today out of ABS. One thing I did do differently was using some liquid tape on the bolts (outside of plastic) so if it slid for some reason it couldn't ground out the to body or engine. I know there is a fuse in there also to protect against that but I figured it wouldn't hurt and I already owned the liquid tape.
Thank you so much for this video. I built my own and located the massive vaccuum leak on my fox that was causing idle issues and lean condition.
You guys could use a fish tank air pump instead of your air compressor.
You can find those a garage sales on the cheap.
Good video. I added a shutoff valve, 0.5 PSI propane regulator (CAMCO Olympian 59013 from Amazon) and ring end 12VDC power cables with battery clamps. Made power through-bolt seals from high-temp silicon rubber. Mine leaked smoke from around the cap, which I resolved by smearing the threads with plumbers putty and reinstalling.
So 0.5 PSI is the input pressure? Would it work with no input air, maybe just plugging the input? I wonder if it would build enough pressure on it's own?
@@timtucker7762 0.5 psi was recommended in several different build videos, etc. to not overpressure the car hoses. It seemed to work so I went with it vs. reinventing the wheel. No idea if it's optimal. Smoke does dribble out on it's own without pressure, but IMO pressurization is better to speed the process. I fed a 12V plug-in pool toy inflator nozzle into the pressure regulator. I've even seen designs where people pressurize by blowing into the hose.
Thats a pretty good idea. When I made mine a long time ago. I just used a glass jar and an incense. Yes an incense. One of those little triangle thing that smokes. I also used the long incense on a stick too. The best part is that it smells good. Mine requires no battery or bicycle pump.
Thanks for taking the time to do this video! glad your all safe after the storm, well now I have a weekend project, this will also help me to check for leaks on the turbo pluming on my Super duty diesel
No problem brother! I enjoyed making the video👍 I’m sure it would work just fine for that!
Now I know what I’m making this weekend. Hell yes! Awesome vid and that Fox sounds amazing.
WOW! I’ve watched a bunch. This is definitely the best. Great video. Thanks.
I second that this is the best channel on RUclips hands down glad to see things are ok with you and the family after the hurricane but small question my clutch cable in my 1993 fox keep splitting this will be cable number 3 waiting on it now to come through Fedex it has a stage 3 clutch a friend told me it can be the fork but not sure
Thanks brother 👍 more than likely it’s the cables you are using. The aftermarket adjustable cables suck. Try a factory cable and see if that fixes the problem 💯
Thank you will give that a try
gfunkxpress yea I had the same kit as well still using the bbk quadrant it’s just the cable keep splitting
Dario Chase where is the cable breaking? Under the dash by the quadrant or somewhere else? Maximum Motorsports makes a great cable and quadrant. I was having the same problem years ago and finally bought the MM cable, haven’t had a problem since and that was 5 years ago daily driven.
1320horse it’s braking under the car close to the clutch fork it’s splits there
Great idea. You also could use a mosquito fogger machine ($50 from Amazon Prime) and pour baby oil in it. It works like a charming. It harmless to engines.
That's originally what I googled when I found this.... a DIY way to adapt a Halloween smoker for automotive use. Being a vaper and tinkerer, only thing I need is $18 bucks worth of PVC. Wonder if Domestic/Import have a flavor preference :D
I just built one. I wanted add that you need to twist two pieces of the 26 gauge wire together as that will make a difference to what ohms people see. But thank you for the video.
That's a great idea. I got 22 gauge kanthal wire, because it's cheap, so I'll definitely try twisting it.
Thanks for the tip. I have 24 ga ss wire that i gotta go about 10' before i get anywhere near 2 ohms resistance. Will give this a shot.
Mine keeps catching fire
Another great video man, good job and keep them coming!
Appreciate the kind words🙏💯
Just put mines together and if works great... really helpful when you do your own repairs.... great video man... I have a 2012 S197 6speed
Your right about the BCam sounds great ,great videos, i try to add a comment in your b-cam install video but they are turned off, my question is when you installed your b-cam did you change your stock valve springs?
Love your content brotha I messaged your fb page but never got an answer for a question I had but I bet you get a ton of messages on there so I def wouldn’t hold that against you at all brotha love your content keep all the great info coming I am really learning a ton about my car that I didn’t know thanks again
Thank you, sorry the messages are hard to keep up with, you’re welcome to ask your question here if you need to. 🙌
Of course the guy with the Mustang builds it solid nice job
Best one I've seen so far!
Made my own worked well aside from being unable to find coil wire.
Any suggestions on alternatives?
I ended up using an old soldering iron in place of the wire works well but not very portable.
Try the heater wires from inside an old toaster.
Great I will make it. You could use a constant current power supply
Thanks for this detailed video Brother. Gotta see now if I can source these parts here in Colombia! LOL
I built this yesterday, but I had to order the resistance wire. I tried using mig wire, but count get the right resistance.
Did you just use one strand of the 26 gauge stainless wire or was it doubled up?
Thanks for this “Mr. Fusion” build! I just finished piecing mine together, looks identical to your mini fusion. The hardest part was waiting on the 26 gauge wire from amazon, since no one in town kept it in stock.
Keep up the good work!
The Genetic Machine you could take it from a scrap portable heater..just measure the width of wire
How about a broken string from your guitar?
we took a strip of paper 1 1 /2 wide and the diameter of the pipe, then divided it into 4 marks, , wrapped the paper around the pipe then used those marks to locate the holes
Thanks for this useful information , now i have a better idea how to chase vacuum leaks ✌️
From continued use, doesn't the wire cause the screw heads to get hot that will melt the PVC ???
Made one these, works great, thanks for posting and sharing !!!
Thanks man
Very useful and simple
What air pump did you use and what is the recommended pressure?
Thanks! Any air source should work. About 5psi
Thanks bud for the build plans I'm gonna build one this week
👍Let us know how it works!
@@BREW2LFOXBODY will do brother it's a great lil smoke machine and under 30 bucks cant beat it and I can get some of the stuff at work😉😉
2 ohms is to hot. It ignites the wick. Use 4.5 ohms and it will smoke and not catch fire. Great video
You used more resistance (more ohms) and it was cooler? Are you certain about this>
@@davidspomer5091 more ohms requires more power, but seeing as the supply us fixed, theoretically it will allow less current to pass.
yea mine caught fire@@davidspomer5091
how do u get 4.5 ohms
This is so awesome I was gonna buy a smoke tester shoot I’m about to build this haha thank you so much for the tutorial
Thanks brother 👍👍👍
awesome gonna have to make this one the best one I have scene by far thank you
Nice design thank you ill make one in the near future and ill let you know how it comes out.
Again thank you for sharing.
GAME CHANGER for sure.....need to make one to find the leak in my 2008 Frontier 4.0
How full do you fill it to? Do you submerge the wick or fill it up just to the bottom of the wick where the wire is wrapped?
Just enough to wet the wick
@@BREW2LFOXBODY just the two legs of the wick or all the way up to the wire windings?
Just leave a 1/16 or so of baby oil at the bottom of the wick
Good deal. Thanks for the info.
What a great little build. I will have to make one of these! Since it is made out of plastic, does the plastic get soft where the power screws come in? Thanks, Tom
thank you sooo much for the idea, I have been using air pressure and a soap test to find a leak, but this is so much better and very inexpensive, half the stuff I had around the house, very good video, can I ask you something ? what is with the music ??? On some videos you can't even hear what is being said
Nice job. Thank you. Kind regards
That's amazing! How much pressure are you putting into it?
1/2 pound, thanks 🙏
Great idea!! Thanks, going to make one today.
Have everything but the wire. Any alternative that they sell locally? The wire you use is only online. Welding wire? Galvanized?
You can buy it at a local vape store
@@BREW2LFOXBODY thanks. What about the screw leads getting to hot and melting the pvc body
awesome info.. came here from martinbuilt who built one of these using your design and gave you a shoutout.. about to build me one to be able to smoke exhausts for leaks. thanks for the video.. btw, where you from? heard you mention hurricane cleanup. im on the MS gulf coast.
I'm wondering if there's a pressure reducer so you don't have to worry about dropping the compressor or even a portable air tank
I’m sure you can find something that will work. It only takes a couple of psi to operate
Love the vids!! Keep em coming!!
Awesome, I built one but what psi are you pushing through the machine?
best one I've seen sir. Thanks
Definitely about to build this thing!
I like the smoker you made as i need one ! also 5psi is tops on PVC for air testing plumbing by the way as your pushing your luck pass that .
Extremely helpful video, thanks for uploading!!
Np bud!
Amazing!!! Thanks for your time;... Sell them on ebay ill be the first buyer!!!
Does the wire have to be stainless, or can it be regular welding wire?
Thats great . I have no idea where to get a wick . Could i use a Tampon ?
No. Anywhere sells tiki torch wicks. Wal mart, lowes etc ace. You want fiberglass (tiki) I imagine. Not cotton. I picture cotton catching fire.
What did you use to regulate the air pressure? And what was that pressure release safety you put on the top?
I just turned my air compressor down to around half a pound. Yes it’s just a rubber plug.
@@BREW2LFOXBODY Building one myself. Got most of the parts. Do I need an air compressor? (Don't have the space for one honestly. Living in an apartment.) Also, for the hose copper tip, what type of part did you use? I noticed you covered the parts list for the ones on the unit, but not for the hose. Or am I just not looking at the parts list thoroughly enough?
@@xPreatorianx1 did you find the hose tip thing? I need one too
@@javaidsadiq5775 I just used a double sided fitting that looks similar to the ones used for the tubing/air compressor on the actual machine. You should be able to find it in the same section in Lowe's if I remember. Basically any fitting that looks similar to the ones used on the machine will do. As long as it fits the tubing. Just look at the fittings in the air compressor section. You'll find one that will suit your needs.
Question what fuse did u use in order to use the activate the battery links I baught one but my fuses keep buning up
What did you do with the other hose where did it go? Why two threaded fittings and not one?
Thanks!!!! Start building one tomorrow.
😎💯🤟
Excellent & Clear Video. Thanks😃👍🏽
I have seen a lot of of smoke machine on youtube...wow bro gotta say that's the easiest one to make..what other tricks you got you wanna share
Good job. TU... Wonder how fast this type of smoke machine would drain out the battery when looking for leaks that take a long time to find.
Start the focking engine dumbo! Battery wont drain then thick shit! Or if the car you're testing it on wont start then use another car that runs to connect to that battery!
Great Job !! where can I find that knife your using?...I'm diggin it !!
I can't see what brand that knive is...please share! I'm curious who makes it!
I need to build that. Good tech tip.
Awesome!!! Im definitely gonna make one!
Sir,in the previous video,you have mentioned to close the throttle body, do we have to do this in diesel engine as well?if so which part to be closed,your video or amazing
LOL! That's pretty darned ingenious, thanks for sharing the design and assembly BREW2L!
I'm going to build it, even if I never need it, I'm going to have one...
Appreciate that bud! 💯😎
Soo what kind of sealant on the top thread,,cause you have to reopen it to reoil...on a need to know basis since I made one and it leaks up top...
I used electrical tape on the top cap.
You can also use a little bit of silicone grease. cleans up easy too if you get it on yourself. I use it on my diving equipment like o-rings.
This is pretty bad ass! How long does it last?
Honestly as long as you keep the wick wet and keep air blowing across the wick it should last for a very long time, worst case scenario you would just have to re-wrap the coil again. 👍