Vehicle Fuse Box Replacement
HTML-код
- Опубликовано: 1 ноя 2019
- Today we'll be showing how to remove and replace a fuse and relay box. Modern vehicles typically have at least two fuse and relay boxes; one under hood and the other inside the cabin. Ultimately, they act as the nerve center for your vehicle. Operating the headlights, rear defroster, blower motor, cooling fans, radio, door locks, windows, bluetooth, gauge cluster, etc...is all possible with the use of fuse boxes and relay boxes. You may need to replace one due to a collision, mishap, flood or just to give you more working room. This specific vehicle is a 2003 Honda Accord.
► Subscribe: / carsntoys
►► Tools & Supplies:
Safety Glasses: amzn.to/2BQKZ05
Ratchet Set: amzn.to/30OkfEd
►►► Our most helpful videos (One million + playlist): • 1 Million Views Playlist
Note:
Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk. Carsntoys is a member of the Amazon Influencer Program.
Publication, reproduction or distribution of this film is strictly prohibited.
Carsntoys
/ carsntoys 
Авто/Мото
There are many tutorials but 99% fail at showing and including the watcher. You have done amazing and did an outstanding job at pointing out what you’re doing every step and making sure the viewer wasn’t forgotten. I don’t leave comments but you have just done a great job and was praise worthy. I appreciate your effort and hard work.
Very clear and concise instructions! Thank you sir!
Great and very informative video. Figured I'd pull out the fuse box in my 06 Accord for a through cleaning as I noticed some corrosion on some of the fuses. Thanks for the tip!
Glad it helped
I appreciate what you have done on putting in the fuse box. You are a very good teacher and I have learned alot. Thank you very much.
Just what i needed to see👍
Excelente.muchas gracias por compartir...saludos desde MONTERREY N.L.MEXICO
Very understanding and precise procedures. Thanks,
Man thank you RUclips need to push this video .
Great Video!! Good Details 👍
So my 2005 Acura electric is going haywire . Lights actually flashed on and off while car was off in driveway . Also this is the second time I’ve blown the same fuse . Would replacing the whole fuse box make since in my case ?Radio hasn’t been working and some interior lights not working
Appreciate you brother
If you replace a fuse box on a modern car will things need to be programmed, like if you changed the body control unit. I must say ..great videos which are giving me a bit of confidence. Thanks
my bro god worked ´Thank you vere mauch
You make it seem like fun.
Thanks, I like to work on my cars myself.
That's great ..thanks and subscribed
Hi, I learned much from your tutorial and thank you. My Acura 2005 tl both fans don't work. The fans & relays function well but inside the fuses terminals 6,5,3,2,1 don't work. I wondering if you give me an explanation
Thank you again
I wish I could give more than one thumbs up
Fantastic video, thank you so much!
Thanks alot❤
Would you know how to fix a loose 20-amp blade fuse that won't fit tightly in the fuse box?
Can you make a video showing where the ELD is located, I have a 2004 Honda Accord ex V6 and my battery light and srs light keep flashing when I’m driving I change my battery and alternator and cables just need to know if the eld on Honda Accord can be change
my 2002 silverado has only one side of the cigar lighter fuse insert that shows power, do i need to replace the whole thing? it also powers my obd that does not get power.
thanks
One Important question, Boss,
If you change the whole fuse box, will it work straightway it does it need programming with the car ECU or Immobiliser?
Do you have a video on changing out the exterior fuse box. I had a fender bender and it busted the entire box how do you have to change the whole wiring harness
Can a bad fuse box cause the 50amp fuse to blow out in the engine bay fuse box?
Fantastic video! I have a 2007, Pilot. Would the process to replace the fuse box be the same? My fuse box is a built-in undercarriage. I don't have anyone to help me, so I'm going to try to change it myself. Any pointers? And is the process the same with my car? Thank you for your help.
My Honda Accord v6 low beam headlights just stopped workin at the same time , I checked all the fuses , no luck any suggestions
This is great. Do you happen to have the part number for this fusebox?
Sir can tell me if we replace whole fuse & relay box, do we need same model or in Honda Accord from 2003 to 2007 are all same? In case we replace with used parts, appreciate your help
I need a fuse box replacement on the hood for my 2002 ford focus zx3 how much do it cost to repair
Man thank you I was super intimidated by this because of all the wires
I have an orange harness right under that fuse box that is not connected would love to know where it connects please thank you
How to remove the relays in the fuse box under the hood. Thanks.
If you change interior fuse box on drivers side does anything need to be reprogrammed?
Does the fuse box don't need reprogramming
Awesome video! Thank you. I bought a wrecked Truck at an auction and the fuse box was smashed. I got another fuse box, but was 'scared' to swap it out. This helps a BUNCH! I'm still a little concerned because the donor truck is a 2009 and mine is a 2013, but the trucks are almost identical in those model years (Tundra), but I'm still a little concerned about different options. For example if the donor didn't have a power rear window and mine does....with the hook up/accessories still work??? do you know? Thanks again! this really helps me out!
The power windows and locks are fuses located on the interior junction box, so it would be fine.
If I were to install a new fuse box do I have to reprogram it?
I hate that google shows me to videos that don't help I google "2008 Chevrolet 3500 fuse box removal and get a video for a 2003 Honda..... 😡
1st! Yee haw! Great vid 👍
I need to know what hardware to remove to drop the interior fuse box to retrieve the keypad code
HOW did you get the IN CABIN fuse panel loose? After removing the screw it is still attached somewhere not visible and I do not want to break it!?? please help and tell me how you did it?
How to tell if the fuse box bad
Great, right where you took the box off, is where I need to know how to fix or replace 2 or 3 loose fuse blades, so the fuse will stay in. I think that's why my ac fuse, horn fuse feel like nothing is holding the in, the fuse just sits and raddels, and no juice.
IF I REPLACE THE FUSE BOX UNDER THE DASHBORD , DO I HAVE TO REPROGRAM THE CAR?
When installing the new fuse block do you transfer over all the original fuses/relays as well to the new block?
I need to change under dash fuse box. Radio, mirror, & cig lighter problems. Noticeable damage under one of the fuse locations located in “UD” fuse box. No fuses blown. When I wiggle the radio fuse the radio flickers. I feel like this will fix everything.
HOW did you get the IN CABIN fuse panel loose? After removing the screw it is still attached somewhere not visible and I do not want to break it!?? please help and tell me how you did it?
Helping Hands Network if you can get the in cabin fuse box totally exposed then you can unplug all fuses that belong to the cars wiring harness. This should free the fuse box. I fixed mine by doing this. Keep in mind I had to remove the whole dashboard 1st. I’m a beginner, but this did the job for me by swapping my faulty burn damaged fuse box out for one that I got at the pull apart. Let me know how you turn out man.
@@jamieking150 there is a physical lip catch or tab or prong keeping it in place on the top that is invisible. Do you have the old one handy to send me a picture of the top back side? That would answer the puzzle. No need to unplug anything. I just need to move it over 2 inches away from the air actuator.
A suggestion is to title your video for which make model and year of the vehicle.
What about for a 2012 Honda Civic si they don’t have those connectors you can’t pull them out
Nice video! How much does the fuse box itself usually cost (interior and under the hood)?
I paid about $205...before taxes and shipping....for the under hood only for my 2006 Chevy Trailblazer SS.
my 2004 base model RSX dashboard lights aren’t working would the problem be the fuse box ?
Most likely one fuse is blown.
@@CarsNToys thank you ! and would you know which fuse would it be or where can i find the correct one so it can work ?
@@miguelangel6984 , there is usually a schematic printed on the underside of the cover. at least there is on the under hood fuse box. If all else fails, ask Google and you usually get some sort of idea. Good luck.
Is the grease really essential? When working electronics I've never had to grease any electrical parts or wiring harnesses. I'm assuming this is the same just on a larger scale, it has a PCB inside the plastic hub that the fuses and relays go into which I'm used to working on electronics. I've got minimal mechanic knowledge (maintenance and small repairs, essentially) so I didn't know if it was really essential.
(By not greasing I mean non moving parts 🤣. Obvs if I'm building a small hover craft certain gears or whatever are getting greased)
We're in the Midwest here with no salt water/oceans at all, just a butt ton of corn lol.
Edit: I put my own junction box/block in about a week ago and she works ever since! I didn't use the grease (didn't have any)but will add it later.
The grease is to prevent corrosion, cars go through incredible conditions, it's just an extra layer of protection because the fuse box is essentially the central nervous system.
You can also use dielectric grease on battery terminals to prevent corrosion and maintain optimal contact
@@chiefdenis yup! I did it on there and the battery terminals too, works great now! Couldn't believe the whole time these last few years it was a bad junction block/box in one area. Only this was caused by a previous owner digging at it with the fuse, it was gnarly under the one.
Okay here’s the issues I have. The fuse box burned out 2 out of 5 harnesses burned too. I got a new box and new connectors.
Thinking to connect the wires one by one guided by their colors and then tape them.
My question is, will that be safe enough just “taping” or do I need to get them soldered??
Thanks in advance for an advice..
Do you have to reprogram the Fuse box when you install a new Fuse box
Those fuses don’t have to be pulled to check them. There’s contact points (tiny holes) for an ohmmeter at the top on each side. You can run through them pretty quick. Hope that helps.
What if we don't have that tool ?
:(
anyone know if i need an original fuse box for my car as an replacement or can i buy a universal one if its available
👍
I think it is a Honda car, then it is perfect.
my car doesn't have nearly as much wiggle room to take it apart even after removing the battery and air box, I am stumped as to how I am supposed to get this thing open all the way as there is a cable wrapped around it holding it in place that will not budge.
You resolve your problem? I tried to replace 2013 Sienna fuse box, same issue as yours, and too much relay connector wire (over 100) need to disconnect. I stopped a half way.
Do I have to disconnect the battery before I remove a fuse or relay?
That was a 2010 Kia Forte
I notice You did not put the year make and model Of the vehicle you are working On And then I realised You did not have to put the year make and model Because All the fuse boxes in all vehicles Are 100% the same
My fuse box has some kind if nasty putty smeared all over the connectors
I got a feeling it’s too many extra steps in this video
2013
My fuse broke into pieces in the box now my truck won’t start
Me too! What was your fix?!?
@@aidenm2672 I replaced all the fuses I could give you my Instagram account if you would like
@@aidenm2672 I went to auto zone I replaced all my fuses brand new and my truck turned on
P
Anyone who needed to watch you remove the
PD Box should not be be touching any of these things. You could have demo'd the testing of the wires to see why they were not powered up and showed the process of doing the repair.
A waisted opportunity...
So no ground wire to the main box? Only positive 12v and alternator wire in?