Never throw away your spark plug, Smart idea for machining engineering
HTML-код
- Опубликовано: 3 окт 2024
- #lathe #tools #creative
Never throw away your plug, Smart ideas for machining engineering
This is one of the functions of the spark plug. By utilizing a spark plug material made of very hard ceramic, it can be used to carry out a friction technique to expand the metal.This method is very effective for connecting pipes so they don't come loose
Lathe
Lathe technique
Restoration
Mr.sunny
Making tools
Creative ideas
Welding
Welding for beginner
Welding aluminium
DIY
Thank you for visiting, don't forget to like and subscribe for support, thank you
Wow that's actually a good idea. I have 500 sparkplugs but now I need a lathe!
😄👍👍
Who would have thought the humble spark plug was so tough? Thank you.
Hope it is useful
Wonderfull, i'd never had believed such a work with used spark plugs !!!
Thank you 👍
I have never seen this done before 😮 thank you 🙏
Thanks
This is absurd, if you can afford a lathe surely you can afford a handheld tubing expander which wouldn't ruin the integrity of the tubing and be 10x faster. People come up with too many hair brained "hacks" these days.
Why do you assume he owns the lathe?
You would need to purchase a set of expanders to cover a variety of thin wall tubes. This works for all the tube sizes you can get onto your lathe.
but this method can make any size
and I'm not sure it affects the integrity versus the cold expander method. It might even be less stressing since heat is involved
@@joemendyk9994 He's demonstrating his technique on a lathe for one...
@@jimhmod A small handheld, hydraulic tubing expander is quite versatile when it comes to sizing up the tubing, you can also heat the tubing up with a small propone torch if you desire. As clever as his method seems the metal is actually being thinned out and some of it is being removed as well so overall it's going to end up being weaker IMO.
I love your work & ideas. Bare foot in a machine shop... I am not sure about that one.
Босиком работать за станком, это очень круто!
Very good job my San God bless you
Thank you 👍
Ya tengo la bujía, ya sólo me falta el torno!🤪
You definitely have a creative gift as you show in your videos....
Thanks as always for sharing!
You're welcome
In 40 years I've not seen anything like this, This is a cool Idea, must try next time at the lathe. 😄
Very nice safety boots, I see you still have all your toes 👍
🙏🙏🙏🙏🙏👍
You know you are dealing with a real genius when you see a man wearing sandals and running a lathe.🤦🏻♂️🤦🏻♂️🤦🏻♂️😂🤣😂
😄😄😄🙏👍👍
Should be called "Lessons from a bare foot machinist"...😊
Thank you 🙏🙏
..
Just need a 5000$ lathe…🥴
Once you have the lathe you can start spending the real money, on the tooling...
Ходить босиком в мастерской где море металлической стружки, это подвиг. Видимо ступни ног сделаны из гранита.
подковал или не мыл лет 5
Yes welcome to the world of real men !
Не из гранита это ковкий чугун
Big brains at work.
Thank you
Notice the Chinese safety boots? They used to be called Japanese, when Japanese products were rubbish!
🙏🙏🙏🙏👍👍👍😄
Forget shoes. I just hope he is wearing safety glasses. You can work pretty well without toes but it is most difficult to weld without eyes.
This is very handy. Thank you for your content, you've got some seriously good tips.
Any ideas for self-made large diameter parting tool cutter?
Thank you very much
Of course there is,
This is the kind of out-of-box thinking that can save the day when the shit has hit the fan and you have to do with what you have on hand. Artists, musicians, and craftspeople. Our Saviors. Kevin
Thank you
ネジ部は炭素鋼ではないのですね？ 陶器の部分でヘラ絞りのように加工ですね❗凄い 🙋 旋盤は何処のメーカーですか？
First, buy a lathe.
and a pair of shoes
Almost had one once :😅
@GeraldMcCunn LOL! How do they get away without shoes and socks?
Maybe first buy some shoes, then a lathe.
Then a pair of safety sandals !
I knew porcelain could sharpen knives but this is a step maybe two up from that
Muy buena idea 💯💥
Muito obrigado
2.28 love the safety foot ware, flip flop toe tectors ha ha
😄😄🙏👍
Kuli buen trabajo y me mata la curiosidad este tipo de trabajo se puede hacer en duro aluminios 😮
Quizás puedas, pero hay que tener más cuidado para que no se rompa el aluminio👍👍
Gracias por su atención
IF you have a lathe you have the proper tools to use it.. IF you have a welder and lathe..you probably have a pretty nice shop and do not need to half ass rig something
to do the work
👍👍🙏
Awesome thank you.
You're welcome
The idea is interesting. I'm going to try that !
What heat index do you recommend for spark plug selection ? ;-)
More seriously, I imagine that you need a fairly high rotation speed to produce heating. And I suppose you can't use too much thickness.
The thickness of the pipe that I have tried is only 3mm
@@KULITEKNIK001 : Thank you for your answer.
3 mm is already a good thickness. I didn't expect so much. What kind of rotation speed do you use for such diameters ?
@@mecabricofaster than slow. Not as fast as really fast
lathes usually spin about 750-1000k rpms. This one appears to be closer to the 750 range. That’s about where you want to be for turning metal down.
@@Scummy_shovel: Thank you for the clarification. This is also a bit of what I imagined. I suppose the metal needs to heat up to become more easily moldable.
I haven't tried it yet; but I tell myself that it would be a good complement to the flow drilling that I already practice. Here too, we use a really high speed (on a smaller diameter). We run around 3000 RPM.
@@mecabrico I’d imagine your thinking is correct and more speed making more heat would prob be more effective. I have played around with friction welding on my lathe and max gears mine does 1800 rpm’s and it friction welds decently fast enough. I was just tough by my dad who was a machinist the “correct” speeds for turning metal. I guess that speed is really just to benefit not over heating and cooking the tool and part. I have certainly turned stuff faster and it worked out just fine.
Is buying HSS lathe tools expensive in Indonesia? Is how you learned to use spark plug?
I did not realize the ceramic insulator of a spark plug would produce that much heat to shrink a pipe. Cool! I'll have to try it sometime. I have some 5" exhaust pipe I need to make 4.75" ID.
Hopefully it's useful 👍
Мастер!!!
Some real work shoes would come in handy.
🙏🙏👍👍👍
Don't wag your finger at me!
Bet the shards of porcelain reallly fly when the sparplug shatters. Might go right through a persons bits
Хорошо конечно когда у тебя в сарае стоит токарный станок!!! А тем у кого нет , что делать ? Сидеть и глотать слюни ?
Ложаться две половины трубки в уголок и свариваются прекрасно.
Ну и дичь. Ты б ещё пару подшипников на свечу приварил, для полного счастья, прямо на изолятор, ага, электродами по оксиду дерева, да да.
Resourceful
Candela trovata.ora guardo dove ho messo il tornio..
Working in a machine shop with bare feet
he had flip flops on.
@@markthompson4885 standing in front of the lath he had bare feet
А короче нельзя было видео сделать?
لماذا أنت حافي القدمين 😂
لديك مخرطة و ليس لديك خذاء
🙏👍👍
Свечи у меня уже есть, теперь только токарник купить и дело готово.
А до роликовой накатки эта цивилизация еще не доросла?
Эх,не видит тебя инженер по технике безопасности 😊
😄😄🙏🙏🙏🙏👍👍
...пришёл бы, оштрафовал бы так, что пришлось бы по миру пойти и уж точно на новые ботинки денег не осталось бы. Пусть режет-обжигает себе ноги, за такие травмы не давать ни пособий, ни пенсий - ничего. Главное - не мешать производству... Во щас коменты посыпятся гневные!
Никогда не выбрасываю свечи, потому что не покупаю новых. Если я их выброшу, то придётся идти в магазин за новыми. А оно мне надо? Стоят уже 10 лет как купил бу машину, так и стоят. А вы зачем меняете свечи?
unreal , take the welder away from this guy , would have worked better with a roller bearing , dont encourage this junk
клас больше видео давай
Нашел чем удевить, это делается совсем не так,Русские токаря делают это намного эффективней .
I have been a machinist for 35 years. Stupidest thing ever right here
bien tu repousse le métal ver intérieure si jais bien compris
Je pense que le "sanfaute" est inapproprié dans votre pseudo. :-)
Every one of the videos on this channel is some ratchet-assed hack way of doing something the wrong way.
Oh, and get some proper footwear.
السلام عليكم من الجزائر
شكرا لك يا صديق
I won't watch a video that doesn't tell me what it's about!
I love no shoes where is OSA! 😂
Да откуда вы такие берётесь? И при чем тут вообще свечи зажигания? Или с такой задачей могут справится только они? Ну а босиком у токарника это вообще бомба. Либо там ноги железные, либо мозгов вообще нет.
Всухую керамикой по железу, аж стружка летит. А масла капнуть? Или картошку на нем жарил и оно кончилось?
Who would have thought?
По голым ногам узнаю пакистанцев.
Заколебали уже эти кулибины с токарными станками. Ой да чего это я. Ведь у каждого в гараже есть токарный станок и ракета в углу валяется.
👌🔟👋👋👋👋💯👍🙏
😁👍👍👍👍
Why?
👍🇧🇷
Who gave this people a lathe?
🙏🙏👍👍
если вы выкинете 1000 свечей то это будет примерно 1000 долларов США в драгоценных металлах, неговоря уже о никеле который стоит 16 доллаоров за кг, из которого сделан стержень, плюс циркон и алюминий который находится в изоляторе.
Bare feet! Omg. Metal in sole of foot much?
Жесть! Он банком ходит возле станка!!!!!
С HULI TECHIQUE не поспоришь, задрочкой свеча приваренная к куску железяки, а чего сразу к резцедержателю не приварил ? А просто трубки две половины в уголок положить и сваривается довольно точно, не ну надо же раздрочить отверстие что бы стенки были как бумага и потом электродом дрочится варить.
Зачем я это смотрю? У меня нет токарного станка😢
Надо попробовать я это делал другой стороной резуа
Give me a break
Lokasi mana mas e
Grobogan jateng pak
He’s got flip flops on, that’s stupid
🙏🙏🙏🙏👍
R you Indian? 👳♂️
No friend
Пустоб рех😅
👍👍👍👍👍
👍👍👍👍
Not a very safe shop are he would have on shoes
😄😄🙏🙏🙏👍👍👍👍
Another DSE video...
True waste of time.
🙏😄👍
епоха глухонімих
What bullshit!
Why?
Why would anyone need to swedge short lengths of steel pipe?@@derickkruger5680
Вот зачем эту муть выкладывать ? Что попало !
Никогда!
Well I hate to break it to you sir. But you have now ruined that spark plug.