Deepest Apologies for how some of the audio sounds. The song came up as copyrighted and youtube removed some parts of the song but not others. I hope you still enjoyed the video, thanks for understanding.
Fishing With Timmy Turtle eh no worries, I reckon your followers to be wise enough to take more from your vids than the music you play in the background 😜 Cherry boat 🤙🏽 Aloha, Stay Bent🎣.
There are a few ideas for building boats: Allow plenty time. take advantage of ready made boat outlines. (I read about these and more from Denelle Boat Builder website )
Fantastic! So generous to share the build with us. 👍👏🏻 congratulations on the presentation and the step by step guide. Everything is perfectly understandable and clear. You both make a great team, the sorcerer and the apprentice 😂 no arguing or any friction just good mates, a pleasure to watch. You struck gold with Jamie, brilliant 🍺🍺🍺
Hi , 👋, Timmy, wow I see that you started out building boat's at a young age . That's just a great job and very impressive 💯. I'm almost a senior citizen but should I ever consider building a boat , now I know where to look up the information from your DIY . Thank you, Mate 💯👍🙏🏻😇😎👍🇺🇸👋
Wish I could build one of these to fish our lake and for the delta, would make it so much easier than having to drag the bass boat out during the week after work, you Aussies sure know how to build awesome water toys.
use a zipper bag to lay the thickened polyester or epoxy, fill the bag cut a corner off and pipe it into the corners (like decorating a cake), works a lot faster, the scraped off glue you can put back in the bag until all is used
Awesome build and I let out a holler with you on her launch! My dad and I have been talking about building a boat together and I believe I just found my next project. Wishing you nothing but tight lines brother all the way from Memphis, TN.
Those transom knees should have had strips of wood attached to them so when you screwed the transom the screws could bite into solid wood. You're basically screwing the transom into the end grain of the plywood on the knees which is not a strong connection. I hope it has fared well!
Thickened epoxy applied to untreated wood will give you a dry bond. The wood suckes the resin out of the mix. You have to treat the wood with a compatible resin or the same but unthickened epoxy.
Fillets: Micro balloons in epoxy are not structural. If you want fillets that add joint strength, use cotton flox in the epoxy to make a composite fillet. The flox is available through Wicks Aircraft and Motor Sports.
Now that's awesome I'm thrilled your getting a new man made boat. nothen like useing something you built your self or with friends. Can't weight to see the next steps. Good job and god bless
Timmy Turtle pipe dreams 2.0 mangrove boss jack slayer limited edition hand built boats....so sick! Shut up and take my money haha. Can't wait to see it finished and on the water..👌
At the moment it looks like more like an Ikea bookcase than a boat! Look forward to seeing it progress. How good is it to have mates that have tools and skills :)
That was the first day I met Jamie but after seeing his tools I’d say we will be mates for a long time to come hahahaha. Nah he’s a legend so glad he took his time to show me how to build the awesome boat
Looking forward to the finished product mate! You deserve it! Pretty slow fishing at the moment in Sydney. Cant wait for daylight savings to come back! Hope your well mate
Awesome Timmy .... great video ... nothing like watching a clip of other people doing hard work LOL. Nice to see you getting you hands dirty and helping out .... unlike that slacker Rod who just buys his skiff (just joking Rod). Can't wait to see it out on the water - will it be able to get out on the ocean ? You're right Jamie is a magician .... it would have taken me two years to do that. Will the next episode come out in time for the next NRL GF ?
Haha rod has got the family thing going I’m sure he would have loved to build one if he had the time. Next episode Thursday night. Started filming the series last year.
im very skeptical about this. is a plywood really good to dip in water. what kind of quality ply do you use here? i think plywood are just a good quality of cardboard.
What Size are those Sheets of marine ply? Overthinking of Building something like that in Germany but I don't know if those Sheets are the same in Germany.
Hi timmy I'm in the USA in Texas I would like to build one of your skiffs I have the plans but everything is in mm. My question is if our 1/2 inch is equivalent to you 9mm. Or is it 1/4 inch
Looks very sturdy! How long does that PU glue take to dry? Also, why take the screws out since you're going to fibreglass it anyway? I mean, the screws will never see the water to rust? Thanks.
Hey Timmy this is a bloody awesome project, just wondering if you could provide a rough guide to how much this cost you in materials. Pretty keen to try making one of these, keep the vids coming mate this skiff is a beast
I'm interested in the plans " VERY " But for basic boat plan info, How long and wide is it?? I was sold before the marlin, but even more when I saw that, lol.
Deepest Apologies for how some of the audio sounds. The song came up as copyrighted and youtube removed some parts of the song but not others. I hope you still enjoyed the video, thanks for understanding.
Fishing With Timmy Turtle eh no worries, I reckon your followers to be wise enough to take more from your vids than the music you play in the background 😜 Cherry boat 🤙🏽 Aloha, Stay Bent🎣.
Fishing With Timmy Turtle I was just about to say... Like where is majority of the music? And then I read your comment
There are a few ideas for building boats:
Allow plenty time.
take advantage of ready made boat outlines.
(I read about these and more from Denelle Boat Builder website )
I'm glad I came down here. I thought my phone was broken. Lol
Is that a kit or plans boat beside tall in the yard..?? Nice job on the build TT
i hope you buy that bloke 100 cartons what a legend he is !
Fantastic! So generous to share the build with us. 👍👏🏻 congratulations on the presentation and the step by step guide. Everything is perfectly understandable and clear. You both make a great team, the sorcerer and the apprentice 😂 no arguing or any friction just good mates, a pleasure to watch. You struck gold with Jamie, brilliant 🍺🍺🍺
Fabulous effort built a two 5 m sea kayak with students using similar materials and it turned out fantastic. Can't wait to see your finished product.
Hi , 👋, Timmy, wow I see that you started out building boat's at a young age . That's just a great job and very impressive 💯. I'm almost a senior citizen but should I ever consider building a boat , now I know where to look up the information from your DIY . Thank you, Mate 💯👍🙏🏻😇😎👍🇺🇸👋
timmy turtle? timmy G.O.A.T
Greatest
Of
All
Time
The guys tool bags are on backwards. Love it
He’s good. All free handed and was spot on 👍🏻
Lets get that thing on some GT brother!!! Awesome build Timmy the 🐢 !
For putting in the fillets I think a frosting bag with a good size tip would be handy.
Going hard Timmy, awesome to see you evolving and changing things up. The new build is looking stout too. Keep it up.
Wish I could build one of these to fish our lake and for the delta, would make it so much easier than having to drag the bass boat out during the week after work, you Aussies sure know how to build awesome water toys.
Just got home from arvo shift. Been stinging to watch this all day. FUCK YESS TIMMY.
use a zipper bag to lay the thickened polyester or epoxy, fill the bag cut a corner off and pipe it into the corners (like decorating a cake), works a lot faster, the scraped off glue you can put back in the bag until all is used
Top job mate, keen as to see you put her to work.
Use expanding foam for a solid base, some waterproofness, and always floats.
THIS IS SWEET!! Watching the entire series!
omg that looks great timmy. I love how you show us its not impossible to make something amazing.
Happy to see your notification pop up!
Great video Timmy, can't wait for the next installment.
May even have a crack at one myself.
Awesome build and I let out a holler with you on her launch! My dad and I have been talking about building a boat together and I believe I just found my next project. Wishing you nothing but tight lines brother all the way from Memphis, TN.
Pulled the trigger! I ordered the plans. I've watched this series three times now, haha!
good vid mate, I'm currently sanding back fibreglass on my project boat and it's tough! I appreciate your work, keep it up!😀
Glad to see you guys using all the correct PPE!😆😆
That's looking mint!!!!
Love that accent!
18 by 18 = ayedeen buy ayedeen
i just started bro... thank you so much!
I didnt know i needed one of these until seeing your other video
Those transom knees should have had strips of wood attached to them so when you screwed the transom the screws could bite into solid wood. You're basically screwing the transom into the end grain of the plywood on the knees which is not a strong connection. I hope it has fared well!
Thickened epoxy applied to untreated wood will give you a dry bond. The wood suckes the resin out of the mix. You have to treat the wood with a compatible resin or the same but unthickened epoxy.
Marinplywood so no need
Get rid of the screws on the transom and replace with large diameter washers and stainless bolts to spread the load 👍
beautiful. I know its going to be a fish magnet
love the work boots timmy :)
Woww Timmy Turtle I was very impressed seeing you build the plywood boat !!! That was sick man AMAZING VIDEO
How good mate ! Well done
Fillets: Micro balloons in epoxy are not structural. If you want fillets that add joint strength, use cotton flox in the epoxy to make a composite fillet. The flox is available through Wicks Aircraft and Motor Sports.
Keep it up, mate. Big fan from the West coast USA. Can't wait to see part 2.
Timmy, quality content mate. keep it up
So keen to finally see these vids. yeww
Great build boat amazing
Sick as vid mate, lookin forward to the future vids!!!
Now that's awesome I'm thrilled your getting a new man made boat. nothen like useing something you built your self or with friends. Can't weight to see the next steps. Good job and god bless
Danny Schwab wait.
Music Islife yea that too. God bless
Good job can’t wait to see it finished
AWESOME video Tim. U are an inspiration
Timmy Turtle pipe dreams 2.0 mangrove boss jack slayer limited edition hand built boats....so sick! Shut up and take my money haha. Can't wait to see it finished and on the water..👌
Nice one looks sick
Finally a new video
“Aww, you’re a magician!” Haha. I don’t know why I found that so funny. 🤠👍🏻
Tim's back again.........Booyah
Should have used Cabosil for the fillets Microspheres are not for structural fillets only fairing. Try a plastic spoon for spreading vs a pop stick.
Awesome quality mate 🤙🏻👍🏻
Nice....!!
Gonna be a Sweet Fishing Platform. Great Stuff.
where are you guys? not sure UK, AUSI, KIWI, cool to see a carpenter in another country work, quit sure we would get on fine!
in australia mate
Can’t wait for finished product. Love the warts and all approach to your vids.
awesome team effort guys. already like and subscribed. can't wait to see the finished product
Great job M8
Awesome mate. Fishing in comfort
Love your work Tim!
This looks awesome mate, my wife is going to hate this being built in our garage...
hahaha my mum was the same. very dusty when it comes to the sanding!
Where can I get the plans Timmy?
Yesssssss love this
This is mint Timmy
On my way to Bunnings now! How good!
I would have inset the transom reinforcement twice the thickness of the transom boards the attach the transom to the bottom of boat
Great desugn
That'll be a luxury liner mate.
At the moment it looks like more like an Ikea bookcase than a boat! Look forward to seeing it progress. How good is it to have mates that have tools and skills :)
That was the first day I met Jamie but after seeing his tools I’d say we will be mates for a long time to come hahahaha. Nah he’s a legend so glad he took his time to show me how to build the awesome boat
what an absolute legend!
This is sick as
Big 50kg GT on the new raft mate?! Haha! Legendary stuff bro! 👍👍👍
Why not stainless screws through the whole skiff left in for more strength?
Nice job
How has it held up
Good job
Hello ! I would love the plans so I can build this please . Is that possible ?
Urbane-east knows how to build em!
Looking forward to the finished product mate! You deserve it! Pretty slow fishing at the moment in Sydney. Cant wait for daylight savings to come back! Hope your well mate
Awesome Timmy .... great video ... nothing like watching a clip of other people doing hard work LOL. Nice to see you getting you hands dirty and helping out .... unlike that slacker Rod who just buys his skiff (just joking Rod). Can't wait to see it out on the water - will it be able to get out on the ocean ? You're right Jamie is a magician .... it would have taken me two years to do that. Will the next episode come out in time for the next NRL GF ?
Haha rod has got the family thing going I’m sure he would have loved to build one if he had the time. Next episode Thursday night. Started filming the series last year.
Awesome video! Awesome Project! might even make my own.
Any information on your friends boat? I'm interested in seeing more of that one too
Can I get a copy of the plans for the boat build?
im very skeptical about this. is a plywood really good to dip in water. what kind of quality ply do you use here? i think plywood are just a good quality of cardboard.
Sick need to see some videos on this soon
yer mate every couple of days they will go up :)
That’s so sick
This work is why I want a plasma cutter
What Size are those Sheets of marine ply? Overthinking of Building something like that in Germany but I don't know if those Sheets are the same in Germany.
If there is an opportunity to come to Thailand.Teach me how to build a boat for me.😁😁
You should make timmy turtle stickers
What's the link to Jamie's build?
Hi timmy I'm in the USA in Texas I would like to build one of your skiffs I have the plans but everything is in mm. My question is if our 1/2 inch is equivalent to you 9mm. Or is it 1/4 inch
how long is the boat bec I want to know big it is before I buy the instructions but if its to big i wont have any were to store it and
In one day that was a lot of work only possible with an expert.
Looks very sturdy! How long does that PU glue take to dry? Also, why take the screws out since you're going to fibreglass it anyway? I mean, the screws will never see the water to rust? Thanks.
Hey Timmy this is a bloody awesome project, just wondering if you could provide a rough guide to how much this cost you in materials. Pretty keen to try making one of these, keep the vids coming mate this skiff is a beast
Awesome thanks for sharing from robert UK London
Shout out to jamie for building this boat. You da man Jamie!
Also Timmy it would be great to see pipedream 2.0 in Raby Bay canals if you get the chance. I know a great spot for launching if need be.
yeeeeew on ya timmy
I like that measurement, A Dean by A Dean
I'm interested in the plans " VERY " But for basic boat plan info, How long and wide is it?? I was sold before the marlin, but even more when I saw that, lol.
I’m guessing you’ll need a trailer for that , looking good so far
yer mate next vid haha cheers