OVERPOWERED! Hand Built Micro Boat Maiden Voyage!!
HTML-код
- Опубликовано: 1 окт 2024
- Limited Offer Reduced Price on SKIFF PLANS for First 100 Customers-
turtlestackle....
Want the boat Built for you? Email Jamie for a quote
jamie@urbaneeastbuilding.com.au
Plans, T-shirts and Hats available- turtlestackle.com
Help keep the videos rolling by Shouting me a cup of coffee or a packet of lures on Patreon!
Any support is greatly Appreciated!
/ timmyturtle
Instagram- timmyturtle_official
Facebook- Fishing with Timmy Turtle
Email- fishingwithtimmyturtle@hotmail.com
Cost of Build With Hatches Approximately- $3500
Building Materials (wood) - $945
Marine Lockable Latches- $235
Resin and Filler- $706
Hinges- $129
Dynel Cloth 10m- $160
Paint and Thinners - $755
Rubber Seals Neoprene- $300
Marine Decking- $140
Stainless Steel Screw Eyes- $33
To build with out hatches will save you money on epoxy, paint, hinges, latches, rubber seals resin and fillers and wood. Approximately $2000-$2500 to build and far less time
Music- Licensed By Dylan Mackenzie
Courage of Nations & She Came Alone
"It's no designed to go more than 20km off shore"
Whoe's watching this after he caught a marlin 40km off shore?
@Revolt Ventures Here mate have a clue. Timmy said it, so he quoted it ... then he actually went out 40 and actually caught a 170 marlin. Take ya own advice maybe. ruclips.net/video/yFtmh0ugs5w/видео.html
Literally everyone who reads your comment is
@@henrysolomon1875 but what's cool is, not everyone knew that. Next video...!
Nice build well done, defo not for open water.
@Chuck Taylor Bingo will only take one accident and all sunk
Mate I am over the moon. My wife asked me why I was so happy for a bloke that I have never met, but it honestly feels like one of my mates has had a big win. Well done Timmy, you're a star.
thanks mate :)
@@FishingWithTimmyTurtle
Hey mate, how did you manage the rego & insurance in QLD? I'm thinking of similar build but not sure if rego / insurance of DIY boats is allowed here in NSW. If you can refer to some site that provides details would be great. Cheers.
I bet that feels good! You will get some great fish, videos and adventures in that monster. Looks sweet in the aerial shots. Can't wait to fish with you again. Also, one 100Amp our Battery will do you if you can charge from the smokey.
it runs interference running them both off the same batteries. two is a tad overkill but if I ever run out of the electric motor battery I can just switch them over and keep going. thanks Andy yer keen for another fish. might bring the skiff up for some impoundment Barra away from the crocs haha
Andy, Timmy just made his own d.i.y product. On day he might sell it online..
or encourage people to build it themselves and get the same satisfaction as I did haha
can't wait to see the first fish in the new rig Tim hahahahaha
hahaha at least you christened it with a monster
hahahaha broooksy! can’t wait to see that
Absolutely amazing bud! What a beast.... that paint job is mint too, sits well in the water. Just sick bud, really enjoyed this series. Can not wait to see the first fish landed 👌
Timmy, find an esky that fits in that frame for your seat, food/drinks, ice, live bait etc and also doubles as a seat
thanks mate good idea!
No worries man, love the boat, jealous!!
I was thinking 2 jerrycans would fit well too, but I think the esky would be better
Since u have batteries I would install a bilge system to pump water out of hull might save your Butt
someday
Awesome build - she bloody scoots along! Definitely the fastest turtle in the water now! :P
Waiting for this video was like waiting for a new season of your favorite TV show.... You did not disappoint Timmy Turtle 😎 Congratulations mate, and looking forward to the newest and next leg of your fishing videos! 👏
INCREDIBLE WORK MAN!!! This channels gonna blow up
Yep. That seals it. I am doing this with my son. I underestimated the seaworthiness of the design. This looks like tremendous fun!
Congrats, Timmy. I can’t wait to see what this allows you to do content-wise. The drone footage in this vid alone was killer. Good luck, mate!
N Wight best of luck with it pal, it will get extremely frustrating but just stick with it
that is one SEXY beast. now i'm keen to build one for myself
So glad I followed this video set from start to finish! I enjoyed it, and learned quite a bit. Wonderful boat and the fact that you do not need much motor to get her up on a plain is wonderful. You look over the top excited about it brother, good for your! You put the work in and you got what you wanted for about a 10th the price. Way to go!
At about 14 min you showed some trailer damage in the front. Maybe something like a keel protector could prevent that. If you got a black one (and cut it to the size you needed) and ran it from left to right (on the lip of your boat), I think it would match your color scheme pretty well, and protect your pretty boat from that pesky trailer. ha ha
Cant wait to watch your adventures, so I can have proof to show my wife that I need to build a custom boat for myself. ha ha
Awesome job mate, the whole project was rad to see! It's so epic that you have plans available for others, and the detail that has gone into the project is top class. Can't wait to see the first session fishing!
Amen on the motor guide comment definitely a must for a lure fisherman spot lock is mint
Dude congrats on the build 👊🏽 great job! Jaimie is a good friend. New subscriber here from Texas 🤙🏽Tight lines 🎣
Who says breaking up with a girl is a bad thing. Bravo mate!
glad you are still watching mate haha
Wow so many dipshits with negative comments regarding your boat, what are they using? Store bought i bet. I think you have done well. I am also in the process of building a boat but it's been in planning for 5yrs and build for a few weeks 2yrs ago lol. Might get it done this year.
Rodney Rokkit on camera duties?
Please what camera are they using?
That seat frame can hold a cooler easy
This whole series has been great, I'm so happy you've pushed through the frustrations/time/cost of the build. I can't wait for more content, you're smashing it.
Grats bud, she's a beauty!! Really happy for you man. Thank you for the awesome videos.
Mate this is unreal!!!!!! Congrats legend
Very nice...! I like to build that here in my country ( Philippines) thank you for sharing
"Come down, sit down and cry" 😂🤣
The initial moments were a bit like watching a foal taking it's first wobbly steps, but you were soon galloping like a thoroughbred! Well done Tim.
Looks so good mate, can’t wait to see some epic vids filmed off it.
Bit of an idea for the failed seat spot could be a live catch tank or esky with a foam seat?
massive and awesome project. she turned out to be outstanding! i run the 18hp from tohatsu on my 380 stacer. beauty alot of grunt. i just run the 9 inch but ur right the 10 inch will raise top end speed and lower your WoT revs a little. awesome mate!!!admire ur work and effort!!
That's so cool that you got it finished a huge congrats to you and keep on making the awesome videos.
She looks so good I reckon I might have a go at one of these
For your next built, if you are going to have less hatches, you could fill the rest with floating expanding foam, your boat will become unsinkable! ;)
Timmy: WOW ! I stayed up all night watching your build . I have to say you are a hard working impressive young man .Got a little choked up when build was near finish . Never saw a stand up rig like those. Looks like fun . Will not bother to fuss about bare feet but please think about some kind of life vest . Have a great time , try to be a little careful . Hope you all the best. Will be watching and enjoying your vids . THX BEN V.
love it, only thing i can see i would to different is add a piece of trim around the perimeter, to act as something to brace your foot against. similar to the raised edges seen on bass boats. should be fairly easy to add. Also if you build another, model it in cad then dxf files and assembly instruction manual.BUILD OUT OF 5056 OR 5052 ALUMINUM NOT PLYWOOD. I understand if you don't have the capabilities to weld a hull or model a hull in cad. If your able to build that boat in plywood, you should be mechanically inclined enough to be able to model and also get good at welding, if you give it time. I sucked when i first started.
awesome idea, love people who think outside the box when it comes to boats, z-bow, stepped hulls, sindle outboard cats(blackdog cat). KEEP UP THE GREAT IDEAS
You did a great job, don't let the naysayers get to you.
Congratulation 👍🏻👍🏽 Really good work !!! I ´ll try to do the same. Tks for yours videos 😜
Use the seat frame to hold a small ice chest for drinks or fish you want to keep.
She's a beaut fishing machine! Also, thanks for sending the Turtle Tackle cap so fast. Looks good and feels great on. Almost convinced my missus on the patron idea. I'll cook her a couple more nice dinners and we'll be sweet! Thanks Timmy!
Hahaha cheers mate. Maybe just save your pennies and get a shirt next then you get something for your money and still helps me out haha. But thanks for supporting with the hat. Much appreciated
MATE.... Bloody speechless what a rig of a boat 🐢🎣👏😮
Awwww Jesus Timmy!!!! That's the second time you made me cry!!!!
You have done a exceptional job building that boat! I am so proud of you. Always wear a life jacket. I hope you have many great fishing and boating experiences.
The dead zone vid was recommended to me this morning. After I watched it I subscribed and then wasted the rest of the day watching the diy skiff series. Your enthusiasm for fishing and the build is just BLOODY AWESOME. Keep it up
I have watched all the way through, brilliant!
How about an update video now its nearly two years on.
hi timmy, i'm from ndonesia ... i want to ask how heavy the boat is ??? estimate
Hey bro sweet skiff!!! thinking of building one down here in Florida. Loved the series very informative loads of quality can’t wait for some fishing vids
And the Grammy for best musical score goes to Timmy. Absolutely awesome watching these videos and to see it finished was awesome.
Well done on the build and the video with the footage of you cruising around. Can’t wait for the footage moving forward.
Don’t forget to shout your Mum some new scissors.
Keep the vids coming Timbo. They are mint.
Very different style boat. It's almost a pontoon, only faster haha!
I was looking at the same brand outboard as you for one of those half blow up surf n' rescue style aluminium floor, Zodiac boats. The one I was looking at was geared to take a 30hp motor. After talking to the guy for a bit at the shop, for one he said by the same outboard as what you have as the motor is a Mercury, just with different (ccv) stickers. And he said to me, buy the 30hp and the only difference between a 30hp and a 35hp motor was or is the carbi gascut. The hole is the 35hp just had a bigger hole in the gascut for the extra air intake. Otherwise, same motor, gears, everything. So he said he would do the gascut for the extra 5hp and if the cops looked at it, the whole engine had 30hp written all over it. Haha nice hey!
Happy boating mate!
Got to love that Aussie ingenuity, they sure know how to get r done, that skip is badass! Went to Summer Nats in Australia last year, those good old boys know how to put on a show and do crazy Skids in their 1000 hp cars. Had the best time of my life! American parties got nothing on the good old Aussie boys when they throw a Shrimp On The Barbi it's on, lol!
Can't wait to come back to race Motocross in the most humble & rowdiest country in the world!
Cheers from NoCal USA,
Awesome series mate, you've built an amazing fishing platform. Well done!!!°°
Looks sick bro! Thanks for signing my hat.
Absolutely awesome boat mate, looks stunning, runs beautifully. You should be extremely proud of yourself, great series of video's also.
Just watched all the parts in one hit..ooft that was a lot of sanding! But the end result is amazing...
Any flop that says anything really negative here are the type of people that struggle to butter bread.
Great videos!
Looks unreal mate. Should get the news reporters back for an update.
Honestly mate, I’m actually proud of how far you come with all of these videos and just being out in general mate, good on you and keep it up up with the videos, your channel is gettin massive!
Cheers mate for everything! YEW! 😊💪🏼🎣
What i wanna know is how anyone could dislike this vid! or even the series! Enjoyed every bloody minute! Congrats on the new rig mate :-)
just found your channel, first vid iv watched of yours,,,,,, great vid well done,,,,, just gave you a like and a full view also SUB and hit the bell,,,,,, look forward to checking out some of your older videos and see the ones to come,,,,,,
9.9 would have been enough. This thing is the lambo of the skiff world!
Awesome build, love the design, looks so professional! Just make sure a life jacket is easy to grab in case of an emergency or rough seas! To many people die from water craft accidents!
Legit just watched all the series and got sad it wasn't finished. Then I was blessed......
BRAVO I hope/wish you wear a life jacket at all time dear fellow fisherman. We wouldnt want to lose you.
Love it, the final product looks sick, and you built it which makes it that much more awesome!
Just watched the whole build. You made an awesome boat mate👊🏻
Just watched this for the third time. It's still one of my favourites of yours. From the music to some of those overhead/ drone shots, it's a hell of an achievement. Haven't seen any new uploads for a while!
Same
Bro !!! Bloody welldone 🤙🏾🤙🏾Looks f#cking Awsome. Can’t wait for new adventures!! Yewwwww🤙🏾🤙🏾
Yeeeeeewww so sick Timmy!
Hi Tim great vid just a suggestion maybe you should put your logo on it
Yeeeeeew! Turned out mint! Well done timmy. Keen to see you landing big rigs on the weapon! 👌
Wow for someone that was riding a PVC homemade boat to this . Congratulations buddy . Enjoy it you deserve it. Go get those fish .
#faroukentertainment
I think this boat is F... awesome :) Great build. Very nice. Love it :)
Looks great Timmy. That thing would function great on the river here in Texas.
Fantastic work mate. Put in the time and you get rewarded with awesome stuff.keepup the good work mate. I'd love something like this.
Sweet skiff, can't imagine how proud you are of a project coming together so well
Looks mint mate! For a new propeller I would suggest a stainless steel solas prop, best on the market. Keep it up 👌🏽👍🏽
👍👍👍👍👍👍👍👍👍👍👍👍👍!!
As a minor suggestion, I’d shorten that grab rope so there is no way it gets to your prop. Excellent skiff brah!
Congrats man. Its not me on it but i'm grinning ear to ear for your achievement. Was fun watching you build it.
That is so cool wish I had one
why dont you add holes on wall of your hatches then bung on the back so the water falls back to the bung wait never mind you just explained it
Great job mate, looking forward to the new vids.
just found your channel... so awesome and your marlin hook up was absolute mental. DIY ALPHA!
This boat is absolutely sick! Enjoy!
Hi Tim, amazing project and it came up unbelievably good! Well done! A suggestion if I may. If it was me I would put in a lean post or something either on the back or maybe slightly in front of where you stand. That way you could lean back when cruising or if it's in front you at least have something to stop you going A over T. Once again unreal looking rig, it's bloody unreal!
Try a sliding transducer mounting bracket. It will save your transducer especially with a flat bottom boat.
This is awesome! Congrats man. I’m working towards a build right now just saving some money. I just want something that floats kind of like your pvc raft but I’m going a different direction
I just sat through all the build videos. You got a subscriber. Good job! 👍
I’m thinking of building a skiff and this gave me excellent idea of what to expect.
Timmy. Wow. Great job mate. She looks amazing. 😀
awesome rig. do you recommend building a boat or buying one from a boat dealer. love your channel keep it up
thank you for sharing this!
Great series of vids! You use a kill cord, BUT WEAR A LIFEJACKET TOO DUDE!!
Just watched all 5 episodes of the build. Very nice . Thinking of making one out of ally.
like the build. Bilge pumps would add no weight and would be a good addition. Question, why are you running such a long shaft electric trolling motor? I really don't understand why the shaft is so long? Please explain. Other then that awesome build!
Great job!!! I'm amazed what you have accomplished...
NICE,your Own Fishing/Fun PWC,personally water Craft.
Mate! thats an awesome skiff! I would love to build my own at some point... thanks!
Epic timmy! keen as for the upcoming vids yew
No idea how I stumbled across you Timmy, but so glad I did. Hilarious and informative. Awesome
First of all, I want to congratulate you for your attitude and I like to make this boat, very showy. And I also wanted to know if it is possible for you to give me this plan to build a boat model, I would very much like to go through the same experience you went through. Can you help me accomplish this
Watched all the build parts of this boat today was very interested in see the final product. Looks really good you did a fine job. And wow 50kph is moving. Yeah pretty sketchy if the are sandbars and stuff that could stop you abruptly. Maybe a harness system anchored to the stern would stop you from flying over the bow but it would need to be long enough to engage the deadman switch in the instance the driver was knocked unconscious during an accident.
you’ve came a long way mate. been following you for a longtime ! boat looks sick 👌🏼 can’t wait to see some fish landed on her ! yewwww 🤙🏼🤙🏼
Good day mate, my hats off ro you. for the last several weeks i have been seraching You Tube for a working boat, a working barge for maintaining a sixteen acre pond on my dairy ranch in Petaluma California,
i had hours and hours of looking for just the right design and size to meet my needs. From your very first video i realized that you had the answer and i thank you .
your vessal ( you really should name her ) came out great. i am sure you will have many days of enjoyment catching fish or not. i will keep an eye out to see those fishing adventures. yours truly Bob
Bit too much Freeboard for my liking but great job. Oh, and don’t forget your kill switch lanyard
Awesome awesome job! If she was mine I'd be very proud of how she turned out, again, very nice build buddy!
Too many personal safety issues. You clearly are oblivious to safety....enjoy your life while you have it, try to grow old, don’t die young and ignorant.