How to Replace Neutral Safety Switch 1999-2006 Chevrolet Silverado 1500
HTML-код
- Опубликовано: 5 сен 2024
- Buy Now!
New Neutral Safety Switch from 1AAuto.com 1aau.to/ia/1AZN...
This video shows you how to install a new neutral safety switch in your 1999-2006 Chevrolet Silverado 1500. The neutral safety switch is a safety device that does not let your vehicle's engine start unless the transmission is in neutral. If the switch is malfunctioning, or failed, you may not be able to start your vehicle!
This repair was done on a 2004 Chevrolet Silverado 1500 Base 4.3L Extended Cab Pickup 4-Door RWD Automatic and the process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/o9c/1AX...
• 13mm Socket 1aau.to/ob8d/1A...
• 15mm Socket 1aau.to/ob8d/1A...
• Air Compressor
• Pliers
• Ratchet 1aau.to/ob9Q/1A...
• Socket Extensions 1aau.to/ob8d/1A...
• Torque Wrench 1aau.to/obbN/1A...
• Gloves 1aau.to/oa6U/1A...
• Marker / Writing Utensil
• Rust Penetrant
• Safety Glasses
• Sandpaper
• Silicone Paste
• Floor Jack 1aau.to/oaxS/1A...
• Jack Stands 1aau.to/oajM/1A...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Best video I found for this. To the point, great instructions, thank you.
we used to make those in rushford mn at trw they had an epoxy sealer where the wire connector goes and some had to replace the wiring harness then when it changed it had a silicone spacer and thats when the line was shut down and gm went with a niles switch where it is mounted inside the transmission so it makes it more work to replace than this switch did
Awesome video. Changed mine in 30 min..!
What were the symptoms to make u change it?
What lubricant should I use
Question replace safety neutral safety switch now when vehicle in park it say it in reverse what I due wrong
Is there a replacement process difference in manual vs automatic? If so, what differences should be observed?
Carefully not to ruin your transmission .omfg really .smfh .corn