QuickTip: How to make your M18 wet dry VAC a
HTML-код
- Опубликовано: 17 окт 2024
- #Milwaukeetools #Packoutsystem #wetdryvac
You can get a kit here:
shop.jakeofall...
Head over to @thejakeofall on IG
Check out the Kaizen Foam @
kaizeninserts....
One of the best designers of 3D Printed Tools
workshop.electr...
Let's be SOCIAL!
JakeOfAll on Facebook: / thejakeofall
Our Garrett Farms on Facebook: / thegarrettfarms
Instagram: / thejakeofall
Twitter: / jake0fall
My Ohio Power Tool Affiliate link shareasale.com...
"I can say that this "VacOut PackOut" Kit is designed specifically for use with this M18 Vac whereas the Keizen feet are not specific at all.
They're just Flat Feet!
I highly recommend the purchase of this kit if your going to do "Packout" you vac."
Just got you’re vac out kit in today and just finished installing it on my wet/dry vac. Thank you for shipping it far sooner than your initial email indicated. It works perfectly. And it doesn’t leak!
No problem on shipping! And awesome on getting it done! Take a photo and share it with me on Instagram @thejakeofall !
JakeOfALL sorry brotha I don’t do social media, personal choice, I’ll figure out how to share it with you thanks again!
Treeboss Mike you could email it to info@jakeofall.com
JakeOfALL will do brotha
*Works great especially with😓😀 the included dust collector bag **MyBest.Tools** Good suction power and light weight.✅✅✅*
yeah
Debating whether to do this to my m12 wet dry instead of biting the bullet and getting the packout vac. If I did do it I'd spray the inside with some of that clear silicone spray or flex spray
Good idea
I envision this kit working on making my legacy Milwaukee carry cases Packout compatible.
I don't see why not
Quick tip you will not have to have the lock it fits tight just did mine today I’m a plumber I would only silicone to protect the screws from drain cleaners pee and poo. Works great easy to do
Awesome!
What tape is he using? doesnt look like the usual weak double sided tape? 3M?
I don't see the kit on your website. Other recommendations?
and this is how the installation driver is supposed to be used! Thank you!
haha !
Thanks
An this is no longer a wet vac seal tight
@@itluis2009 a little silicone will fix that
I would like to mount the hard case that came with my two drill combo set to my packout. Have you played around with that idea?
Hey if anyone has this leak it might be the fact the rubber washers don't really work on the nut side of a nut+bolt. Liquids can still go down the threads! Best solution for this is put the bolt/screw head inside the vac, and thread into the feet!
Your website is incredibly hard to understand. When can I order this kit and where is the link??
email us at orders@jakeofall.com
I was thinking about getting the new brushless packout vacuum but this is a much cheaper option!
Yeah the new one is nice ! But yeah definitely less $$
@@JakeOfALL yea I just ordered a kit and some other stuff.
Hi,
Just came across your video on this kit for the milwaukee packout. Got to order a set for my vacuum.
Funny, now milwaukee has a new 2020 vacuum for the packout system. This seems to a better solution then spending $200.00. Especially if you're only getting a very small suction increase.
Now you need to make a feet kit for the milwaukee cordless air compressor. That will be awsome for a packout system.
Thanks for sharing this video.
thanks ! and i do hope to make a kit for the compressor
Hey Jake will this work with my M28 Vac? Looks just like it.
Hello, I go to the link and they are not in the online store. Do you still sell these?
Watching after Milwaukee announced the gen 3 packout version of this vacuum... Only a month after this video was posted
Don't worry I have the gen 2 shop vac as well
I know right...
Dang the link doesn’t work. Guess these aren’t for sale anymore?
Ive just discovered this channel . i have a bunch of dewalt 20v stuff. and random organizers.. I think you might be switching me to milwaukee. just a home user here lol.. but im addicted to the 5s style of organizing
Yes ! 5ss..... everything has a place and everything in it’s place!
@@JakeOfALL how about some freebies for a Canadian on disibility pay, maybe a decal? Ill put your sticker on the middle of my rear window so people in southern ontario can see it! I drive over 200 000km driving patients to appointments in different cities depending where there doctor is ! its mostly rural folks who dont have they means to get into town. a decal would boost my spirits big time!!
Awesome! Another great idea! Thanks!
Glad you liked it!
Would like packet for hardcase and batteries m18 m12clips
hey Jake I got my order already its awesome the only thing is the stickers were melted with the heat I guess. I tried super glue no luck until I used water weld.
Oh no! but good idea on the water weld.
Looking to attach my 20v Max vaccum to my packout set up. Happen to make a kit for that?
Not specifically but email pics to help@jakeofall.con
Great video will that fit on the Ridgid vacuum
It’s possible! If not the generic feet we sell should !
Will thoes packout feet work on the MTB2600 tool box & MTB1400?
If so I'm ordering some.
I don't see why not
Man i need that template... Anyway to get a copy of that paper you showed?
Email me at orders@jakeofall.com
Page not found are these no longer available?
Just ordered mine
hell yeah
Very nice! Any chance you might share the print file? Otherwise, do you ship to Canada?
Any idea where I could get a kit like this for the m12 vacuum?
Same kit should fit
Some people have use this kid as well you just have to attach it to the Packout first and then lineup your vacuum yeah
Fabricates awesome MiLWaUkEe products (has millions of Milwaukee drivers at arms length), uses tiny manual blue/white CRAFTSMAN socket driver to install his nutz! :P
Hahaha
Will this work on the M12 version?
What is the biggest battery you can use in the vacuum??
8 I think
I'm gonna try mounting this on my Klein Tools 55485 Tool bag 🎒 🔥
Could you not print a new lower for the vacuum
How can I place an order for these?
I just ordered a kit and forgot the shipping. I sent you the money for shipping through PayPal a few minutes after.
Hello ....this Stephen just how to get a cup holder for packout ?
store.jakeofall.com/milwaukeeproducts/vacout
Cups are here ..... store.jakeofall.com/milwaukeeproducts/miscpo/pofeetbrack
Will this work on the M12 Vacuum?
Yes
Omg why did i never think about this
Where to purchase this?
Shop.JakeOfALL.com
I made an order more than a month. do you know when am getting my kit?
email us at orders@jakeofall.com thanks
@@JakeOfALL thanks
Is this applicable for converting the job site backpack?
no but the stealthmounts should work
@@JakeOfALL Ok thank you for the info.
How do I buy
Email orders@jakeofall.com
Want to get these feet to put my 216 piece craftsman versastack with drawers in my packout set up, would be great! Although not necessary. Lol
yes it would
This legendary
Haha
How about side mounting clips?
Say what?
@@JakeOfALL i want to mount it on the packout wall mounting holders.
What’s that stabilizer foot on the installer drill for the 4ah battery
Can I use this kit on the M12?
It will need some customizing .
Do you have a kit for the m12 vacume?
no but the stealthmounts should work
@@JakeOfALL thank you :)
Link isn’t working.
Can I re order just 2 3d printed bottoms 2 of money me are falling apart
Yeah ! Msg me on Instagram
@@JakeOfALL I don't have that
Man if you can figure out a way to packout my Veto pro pac XL I'd be forever grateful!
I'm looking at your store and I think a combination of the flat feet and this vac-out release trigger might work nicely
I think so
I want to do this to my veto bag
haha One day I need to get one just to show off how to do it !
Has anyone tried this on the m12 vac? Or is it too small?
great job my friend εισαι ωραιος
Are these kits still available??
Hi jake l watching your video’s more and more you have some great ideas l have Milwaukee box that has my drill and impact driver m18 the ones with clips on the side so they stack up with same boxes but I have just got my Milwaukee packout trolley with two more packouts on top black l wish I could have got a red packout oh well do you do a set of feet or packout clips so can put my old Milwaukee box on top a bit like the set you done for the Milwaukee vac and would you send to the uk 🇬🇧 thanks stay safe 👍
Don’t see this kit on your new site..
email us at orders@jakeofall.com
I'm gonna need a link for the hat. Looks like a deep bucket and I have a huge head
Make the video of the fan lazy Suzan style and take my money for it
Hey is this still available.
Yep !
Shop.JakeOfALL.com
how much? how do I order?
went to your store! thank you!
Glad you found it !
Who sales the vac out pack out kit
I do ! store.jakeofall.com/milwaukeeproducts/vacout
Are you not selling this kit anymore?
email me at orders@jakeofall.com
Update the seller link. I can't find it
shop.jakeofall.com/products/vacoutpackout-kit-for-use-with-the-milwaukee-m18-vacuum?_pos=1&_sid=285f11c16&_ss=r&variant=43546008780954
Or search for Vacout
Sold out??
Email orders@jakeofall.com
How about an m12 kit?
not yet, I need to get my hands on one ! are you in Florida LOL
@@JakeOfALL I am not BUT I do have a m12 vac i just got. I also know my way around technology and have a 3d printer if there is anyway I can help.
What is turn around time on these? I would like this kit as well as the handle pin kit.
Looked on your site and couldn't find a link to email you.
You cam pm me via facebook or respond here.
email is at info@jakeofall.com or msg @thejakeofall on IG
Who has an 11/64" drill bit" lying around"??
See what i want to do is make one out of all the drill cases they throw away at work
Explain that more
Checkbout my vac out on my page.
Please advise this upgrade will remove the seal tight water no longer works before they do anything not half way of the video you do the disclaimer
Did you not hear what he says? Did you not watch the video? There are silicone washers with the kit which seal to the fasteners. Be sure you know what your talking about before bashing someone’s video Karen
John Argumaniz
First I don’t bash anyone because I express my opinion
Second my name is not Karen
Third using silicone or any type of sealer still don’t replace the manufacturer warranty father you drill the original bottom
The idea is great but maybe the mounting or the clips can be different
John Argumaniz I think this guy is a troll. If you’ve ever worked on a reservoir tank on a toilet before you know rubber washers are all that keeps the water in the tank for all of our toilets and that’s been used for decades. If you’ve been trusting you’re toilet all these years I think a little 2 gallon wet vac will be fine. I just got my kit in today I’ll be installing it this weekend. I won’t be using silicone. That’s not necessary.
@@treebossmike8818 not a troll yes another guy like you that watch amazing channels an ideas ,JakeofAll channel is one of my favor he keep it clean of and i love his shop but that doesn't mean i agree all the time or maybe have a different opinion
you automatically attack someone for having a different opinion
they have very good epoxy's out there that can be use to plastic weld the kit he did instead drilling the bottom part of the vac
TheMan wasn’t attacking you not my intention. My vac doesn’t leak just like my toilet reservoir if you use any kind of silicone or epoxy go for it it’s just not necessary.
What's the website to buy this kit
store.jakeofall.com/milwaukeeproducts/vacout