Oh damn this is what I need! For real, I’m going to put in some work as well to get it more organized, but I agree it should’ look just like that, in fact that would be so much more enjoyable to use as opposed to what I just purchased 😂
Can the trays in this video be used in the Compact organizer by stacking them? Will the lid still close? Will everything still stay in place when the case is carried by its handle?
Yeah I personally know at least 20 guys that came up with this idea 30 years ago and I will guarantee you there are hundreds more thousands more that came up with this idea on their own as well the reason Milwaukee did it come up with this idea is because it's a smart idea but I've seen better ideas and unfortunately instead of hiring smart people to design and develop they higher a bunch of idiots out of college who have never worked a day in the trades so they have no idea of what to even think about let alone actually do or they're paying a whole lot of people a whole lot of money for no reason at all because they're not doing their job properly and then at the same time want to I highly overcharge the consumer for a crap product and stupid people actually pay for this stuff
I hate the ShockWave packaging! For my fat fingers I struggle to get the bits out PLUS how many of the different bits do you use daily? I have a small shallow PackOut with all the different bits in the bins plus I have a pocket full of bits I would use daily. I have a 3/16" and a 3/32" drill bit for pilot holes, T25,T15, T10, #2 square bit, #3 phillips, #2 phillips stays in the M12 Impact. Remodeling is fairly consistent for screw needs. Your setup looks good but is ridiculous for the daily user.
@@JakeOfALL hah, nahh not really, i thought u were pitching them! didnt want those fine cases to goto waste, im a repurposing reusing recycling fanatic!
because the price of the bins and holders cost more than the packout and all of the bits together. lol. but its a one time thing. Ive done all of mine about 5 packout cases.
Nice job Jake! Even though I have a 3d printer I'll probably grab some of these from you since I'd have to tie up the printer for quite a long time printing all the bins and bit holds I need.
Can the trays in this video be used in the Compact organizer by stacking them? Will the lid still close? Will everything still stay in place when the case is carried by its handle?
Google "Milwaukee 4932464145", it's for EU market and it's quite old thing (at least 2 years old) i must tell you :) I'm planning to buy one and put there my planks from bit sets i have (drills/bits)
Great idea jake I have to go down this road but as I am in the uk 🇬🇧 I can’t find anyone who 3D print these boxes at a good price in the uk 🇬🇧 do you post over to the uk 🇬🇧
dude i am so going to convince my uncle to this - its so annoying looking for bits in different boxes only to find a box with what should be drill bits is filled with literally anything but said drill bits
I Purchased a similar kit without the bits, paid on 12/31/20 and still don't have anything to show for my $191 as of 4/1/21... Feeling ripped-off by this guy... Anyone else have a similar experience?
Just ran into this, love it! I am having a little bit of an issue finding these inserts on your website. The link provided doesn’t lead directly to them. I have the packout, I have the bits, I just need the 8 inserts for my box. Any help navigating, or locating, would be helpful. Thanks a ton!!
If you’re on the fence about buying some of these, I’d highly recommend. Bought mine a while back and I can’t imagine going back to normal bit boxes. I put mine in a half size thin packout and put it under my 15” tool bag. Excellent
Has anyone else bought the Milwaukee Track Saw only to discover that there’s ~6” of unused space above the side of the Pack Out case above the accessories side? Maybe Jake is already working on it.
@@JakeOfALL I tried to reach you guys on online chat. Can you please let me know what items I need to buy to build this kit. I bought all the items from Homedepot. Just need to buy the 3D items from you. Thx a lot.
I'm still not all the way through this video... Milwaukee should be paying you and using your designs!!!! I love it!! I would still use my little cases though 😆 🙋♀️💯💖
Love the stuff you do and all the ideas I work a lot with the zipwall system take a look at one tell me if you have any good ideas for it banging my head 🤘🏽🤘🏽🤘🏽🤘🏽🤘🏽
@@JakeOfALL it’s a dust barrier system that uses spring loaded poles to hold plastic sheets in place to help with dust it does come with a carry case butt I’ve been trying to figure out a system to use on the packout
My heart skipped a beat every time you threw one of them awesome little cases lol. Love all of your creativity! Been browsing through your videos and I absolutely subscribed! Thanks for great videos!!
@@JakeOfALL I already have lol. I plan on getting into the packout at some point. I will definitely be reaching out at a future date for some packout goodies from ya!
I’m sold. I’ve been looking into pack out for a bit now. I’m gonna wait til they release the drawers and I’m gonna have you design my system.
Good choice!
Right! Same here!
Oh damn this is what I need! For real, I’m going to put in some work as well to get it more organized, but I agree it should’ look just like that, in fact that would be so much more enjoyable to use as opposed to what I just purchased 😂
It’s so nice when you can find what you need !
This is fantastic
Thanks
Fantastic 👌🏼👍🏼
Thanks
Can the trays in this video be used in the Compact organizer by stacking them? Will the lid still close? Will everything still stay in place when the case is carried by its handle?
Yes if you use a shim or if you use them in combination with a bin we call the bunkbin
observation: no other tool guy has thought of case mods like this. He's the first. And his are the way to do it.
I read this in hk-47s voice
where is the link to buy what you have built ?
awesome organization idea, I'd buy one of those!! I hate digging around for the right bits and drivers all of the time
Yeah they are so helpful
Wow great idea, I had this organizer in my hand today saying “what can fit in this”???...very awesome, where did you get those black trays from?
I 3D print them
Share de 3d file please
I am from México, its dificult buy from here
Where can i buy these i looked on the website but i don’t see any buy option anywhere. I love this for organization and is a amazing idea i need it.
Absolutely love what your doing mate! I've had a look on your website.. would you ship international? I'm in Australia.
Keep up the great work..
Thanks so much. We do ship there all the time!
Hi.
Can I get it by courier service in Korea?
Yeah I personally know at least 20 guys that came up with this idea 30 years ago and I will guarantee you there are hundreds more thousands more that came up with this idea on their own as well the reason Milwaukee did it come up with this idea is because it's a smart idea but I've seen better ideas and unfortunately instead of hiring smart people to design and develop they higher a bunch of idiots out of college who have never worked a day in the trades so they have no idea of what to even think about let alone actually do or they're paying a whole lot of people a whole lot of money for no reason at all because they're not doing their job properly and then at the same time want to I highly overcharge the consumer for a crap product and stupid people actually pay for this stuff
Good points
observation: carry it vertical and everything falls all around. Lots of posers on the internet . . .
I hate the ShockWave packaging! For my fat fingers I struggle to get the bits out PLUS how many of the different bits do you use daily? I have a small shallow PackOut with all the different bits in the bins plus I have a pocket full of bits I would use daily. I have a 3/16" and a 3/32" drill bit for pilot holes, T25,T15, T10, #2 square bit, #3 phillips, #2 phillips stays in the M12 Impact. Remodeling is fairly consistent for screw needs. Your setup looks good but is ridiculous for the daily user.
AAAHHH give those shock cases to me!... im a poor, hardworking Veteran, trying to remake myself in the trades....aaaannd so on
you want the empty shockwave cases?
@@JakeOfALL hah, nahh not really, i thought u were pitching them! didnt want those fine cases to goto waste, im a repurposing reusing recycling fanatic!
Good thing you stated you were a Veteran.
@@jamescooper8107 yeah i was just messin LOL, i do love cases but unless everyone had a chance i dont want freebie, i buy
because the price of the bins and holders cost more than the packout and all of the bits together. lol. but its a one time thing. Ive done all of mine about 5 packout cases.
Yeah
what about bins for the center?
Email us at orders@jakeofall.com
If you used the large/deep organizer can you stack or nest two levels of bins?
Yes !
Hello great concept I love this how can I get a list of what to order from you to make this? I already pickup the low profile case.
Email us at orders@jakeofall.com
Where do I find these bins? I looked on your site and didn’t see them.
Email us at orders@jakeofall.com
Nice job Jake! Even though I have a 3d printer I'll probably grab some of these from you since I'd have to tie up the printer for quite a long time printing all the bins and bit holds I need.
Haha, yeah I actually have a friend print me a few things, even though I have almost 20 printers
Love this. I’m so going to look into these. I get tired of having to thumb through all the small cases
the link takes me to a page to by the large tool box on wheels.
where do I find these bins?
Email me at orders@jakeofall.com
I love the shockwave cases. Im weird like that.
Lol
At first I was sceptical but along and at end I got excited. Approved!
Can the trays in this video be used in the Compact organizer by stacking them? Will the lid still close? Will everything still stay in place when the case is carried by its handle?
You should sell the bins in a half and full size packout combo to.do the swap (packout not included)
We sell so many combinations!
love the idea but why is this guy whispering? was he making this video at the library?
Google "Milwaukee 4932464145", it's for EU market and it's quite old thing (at least 2 years old) i must tell you :)
I'm planning to buy one and put there my planks from bit sets i have (drills/bits)
Speak louder
Volume?
Never heard of it. :)
Where do I buy this?
Store.JakeOfALL.com
I don’t see those on your page. Pls tell me how to order
Shop.JakeOfALL.com
Can someone tell me the interior dimensions of this case? Left, right and thin middle part
Great idea jake I have to go down this road but as I am in the uk 🇬🇧 I can’t find anyone who 3D print these boxes at a good price in the uk 🇬🇧 do you post over to the uk 🇬🇧
Thanks so much! We ship across the pond all the time
dude i am so going to convince my uncle to this - its so annoying looking for bits in different boxes only to find a box with what should be drill bits is filled with literally anything but said drill bits
Do you sell the files for the bins?
The bins are on thingiverse
how can we order the whole set? gotta link to your store? I don't see it on there
Shop.JakeOfALL.com
Shop.JakeOfALL.com
I would like that same packout bin set.....How much and where can i buy
Is there a link to buy this?
We have some on shop.JakeOfALL.com
can't hear a freaking thing you are saying.
Seems like a you problem.
How do I buy these from you ?
Shop.JakeOfALL.com
I Purchased a similar kit without the bits, paid on 12/31/20 and still don't have anything to show for my $191 as of 4/1/21... Feeling ripped-off by this guy... Anyone else have a similar experience?
Where you located ?
Sorry new to this do you sell this specific one ? Would love to have this set up
store.jakeofall.com/milwaukeeproducts/packedoutpackouts here are a few examples! You can also email us at info@jakeofall.com
How do I get this exact set up??
Just ran into this, love it! I am having a little bit of an issue finding these inserts on your website. The link provided doesn’t lead directly to them. I have the packout, I have the bits, I just need the 8 inserts for my box. Any help navigating, or locating, would be helpful. Thanks a ton!!
If you’re on the fence about buying some of these, I’d highly recommend. Bought mine a while back and I can’t imagine going back to normal bit boxes. I put mine in a half size thin packout and put it under my 15” tool bag. Excellent
I did the exact same 👍
Has anyone else bought the Milwaukee Track Saw only to discover that there’s ~6” of unused space above the side of the Pack Out case above the accessories side? Maybe Jake is already working on it.
How much for everything except the bits?
Where do I get the black bins and small and tall bit holders? Thanks Jake!
shop.jakeofall.com/collections/bit-bins-and-bit-holders-for-use-with-the-milwaukee-tools-shockwave-cases-and-3d-printed-bins
How do I buy one of these
Email orders@jakeofall.com
Because I’ve been doing it for a while I guess...
👍👍🌹🌹
Link to order these ?
Email orders@jakeofall.com
This is awesome. That middle section would be perfect for blade storage btw.
Definitely
Love your videos. This one was pretty quiet trying to hear you (my computer speakers up as well as youtube volume.) Thank you !!
Sorry
And thanks so much
It seems sad that a multimillion dollar company with an army of engineers is outdone by some tool enthusiasts with a 3D printer.
Love your vids I'm to deep on the dewalt craftsman wish o would have went with pack out but you have given me a lot of ideas what you have for tstak
Glad you like them!
Dude just go with packout. Its worth it.
how much would this set up cost if ordered from you? the packout, the bins, the bits.
store.jakeofall.com/milwaukeeproducts/packedoutpackouts here are a few examples! You can also email us at info@jakeofall.com
store.jakeofall.com/milwaukeeproducts/packedoutpackouts here are a few examples! You can also email us at info@jakeofall.com
Your showing us nothing dumb video lol
Nice camera angle
Bad microphone location
Is this one for sell? You should have your own store, I will definitely buy couple modified packouts.
I def need one of these. What’s the price as shown ?
Ohh almost $600
If you take the pin out of those drill bit cases you can mount them in the that packout case .
Yeah
👍🏼👍🏼👍🏼 Good to see the setup and growth. I actually passed my first 100k this month.
Thanks and congrats !
Absolutely gorgeous!
How much one these cost to make?
can you please send link. i clicked link above and it didnt work?
thx
Shop.JakeOfALL.com
@@JakeOfALL I tried to reach you guys on online chat. Can you please let me know what items I need to buy to build this kit. I bought all the items from Homedepot. Just need to buy the 3D items from you. Thx a lot.
@@Drilldrillsauce80 are you on Instagram or you can email orders@jakeofall.com
@@JakeOfALL hello. I sent a email. Cool thx.
Are all those bins, custom bins or the bins that came with the pack out
Dewalt already selling set like that at Home Depot.
They are ?
Where do you buy the black trays and bit holders?
shop.jakeofall.com
Nice innovative thinking. I always seam to struggle pulling these bits out of their indexes. Is there a way to do it where you don't bust a knuckle?
thats mint wow
Its like Legos but for grown men. I love the pack out system it's changing the game.
Blew my mind! Straight up magician! Thanks for this video. Gonna try it tomorrow.
Would have helped if you could showed an up close view of how you were attaching those bit holders
How can I get this exact set? I have the exact same bit you have on the vid!
Bro this is Badass !!!!!
Thanks
Little organiser - milwaukee?
Am I missing something or do we really need this for sockets also?
I'm still not all the way through this video... Milwaukee should be paying you and using your designs!!!! I love it!! I would still use my little cases though 😆 🙋♀️💯💖
Thanks so much
Did the bins come from a packet out kit?If not where can they be purchase and for how much? please let me know thank you very much
We sell them at store.jakeofall.com
@@JakeOfALL thank you will look them up
Just awesome
I would like to buy all the printed bins and bit holders in this video
Nice set up I need to do that now
It's awesome !
This is awesome. Im new to the pack out. So new they are still in the mail. Love all these add ons.
Welcome aboard!
hi, where can u buy this?
Store.JakeOfALL.com
Jake
Yes
⭐⭐⭐⭐⭐
Best 3-D print idea!! Love it!
Thanks so much 😊
Really nice. In the empty space in the center you can put hex bit extensions.
Are you still sell the whole kits loaded? I can’t find them
Email us at orders@jakeofall.com
Love the stuff you do and all the ideas I work a lot with the zipwall system take a look at one tell me if you have any good ideas for it banging my head 🤘🏽🤘🏽🤘🏽🤘🏽🤘🏽
Zip wall?
@@JakeOfALL it’s a dust barrier system that uses spring loaded poles to hold plastic sheets in place to help with dust it does come with a carry case butt I’ve been trying to figure out a system to use on the packout
Really like your shows and they are super helpful. I really love my pack out tools and the ideas are always great.
Awesome Jake. Very informative.
Thanks
Does this work with the bins that the packout comes with already?
no, sorry
Nice work Jake.
Thanks
My heart skipped a beat every time you threw one of them awesome little cases lol. Love all of your creativity! Been browsing through your videos and I absolutely subscribed! Thanks for great videos!!
I have them for sale lol thanks so much and tell your friends lol
@@JakeOfALL I already have lol. I plan on getting into the packout at some point. I will definitely be reaching out at a future date for some packout goodies from ya!
Could you make one for me ??
Yes we can ! Email help@jakeofall.com and we will get you going
@@JakeOfALL perfect I've sent you a email
That’s a pretty badass idea
😎👍