Well done, top marks. On the sand paint idea, I just painted water proof plywood with acrylic paint then dusted it with "play sand", lovely fine white sand from hardware store. Patted it down. Let it dry, then shook off the excess, Ten plus years later it's still good as the cover to the cellar in front of the laundry doorway.
RIP Flying machine 2023-2024, You left this world too soon, but at least you didn't take anyone with you... Those speed holes in the frame remind me of the speed holes that Ford put in their frames in the early 80's and i'm angry all over again It's funny and sad that would never be allowed on a job site when it's so much sturdier than the sketchy scaffolding that is allowed Huge props to your son for his drone tracking skills at the end
I have the same vevor mag drill . I installed a cheap voltage regulator, it fits nicely. So now it has speed adjustment. I played with revers drive, but the motor will just eat the brushes, lots of sparks.
That is a brilliant project. I know that your scaffolding might not be safe for the masses, but I'm confident you can use it safely since you will understand the limitations better than most. I've been accused of doing sketchy things in the past while working on buildings, but if you know what you are getting into, and know the consequences, you can usually be pretty darn safe.
I'm already subbed but I gave it a like, and here's my comment. Your builds seem to be getting a lot better at having fewer issues from design to implementation (unless your editing skills are improving). This scaffold system is incredible. Can't believe how stable it is along with its capabilities (height, width, compatibility with tractor)! Well done. I'm looking at my house projects, and travel trailer and am envious of your ingenuity.
@@VinyB57I keep trying to think of a way to spread the word about your channel. I posted a comment on all of Colin Furzes flying machine videos that you had just made the exact same concept with a lot less to work with. You are definitely one of my favorite channels, not much will stop me from clicking when you upload.
@@tracksoneverything4085 Hey big thanks man! Don't worry about the ''other flying machine'' it's behind me! oh no wait, it's not ibehind me anymore, it's in the dumbster now! 😅
Salut Vinny, j'ai rien d'intelligent à dire mais si un commentaire peut t'aider, et bien c'est fait. Super video encore une fois. J'ai hâte de finir mes rénos pour pouvoir vider mon garage et construire une de tes tables à soudure. 👍👍
Really nice to see you again...Viny B... that were some work to get it there it is now, but you did it... I have a schaffolding now, and Im going to put wheels on the height adjustment part of the legs, and make them hingees to make them foldable then your in place....(Sh.t English language, some times.... some people say I speak flowently , spelling is another matter...) So are we going to follow your journey to build your own home office...⁉️ Hope so..And Viny dont do anything stupid....🤔🫣🤔🫣🤔🫣🤔🫣🤔🫣🤔....... I mean hurt you self, like falling and soo on... TOP TIP, SAFETY HARNESST AND AT LEAST A WALKIE TALKIE -in firm attached to something and not falling to the ground, AND DO NOT FORGET A PERSON ON THE AUTHOR END OF THE WALKIE TALKIE HOW COULD HELP OR CALL FOR HELP IF SOMETHING BAD HAPPENS....OK!⁉️⁉️⁉️
Well here a misconception about patent...You need one if you re planning on making the thing you patented and you don t want anybody else to produce the same thing! Plus patent cost from 50k to 100k CAD...I know cause the company I m working for, has a few patents...Also, you can patent your idea to sell that idea, but Im not planning to fab more platforms or sell the idea! So no patent for this thing, please feel free to build one or more 😉I know it s probably more info that you asked for...
@@VinyB57 Nah, I'm always happy to have extra info! I didn't know that applying for a patent cost money, I thought it was just a matter of sending in the appropriate paperwork.
Ok, i have no need for one of these but watched it before the buck hoe build anyway. Loving your content so far, like a cross between Aging Wheels humour and Donn Diy builds.
Joli travail comme toujours, content que ta catapulte à homme soit démantelée avant que tu te sois tué :) . Avec toi en ce moment on est dans la période tout tracteur: bientôt le BBQ tracteur, le plongeoir tracteur ....
Et oui...c est la phase tracteur en ce moment...j ai deja hate de revenir a la phase Smart!! Le probleme est que j ai fait un plan de match il y a de cela 2 ans et je ne sais pas comment, mais je le suis a la lettre! Je voulais aggrandir ma maison, mais j avais besoin d un tracteur pour ce faire. Ce dernier devait avoir bcp d accessoires pour m aider dans les renos...fourches..bachkoe etc...Maintenant, il ne me reste qu un projet a faire avant les rénos et dés que je termine cette réponse, je devrais mi attaquer! 😉
I cannot post every week....still working full time job...this build took me a month to fabricate + about 60hr of editing...My days start at 6h30 and finish at 21h00..7 days a week 😳🤦♂️ Please help! 😅
Link to website and plans: 57design.ca/
That welding table is amazing!
It really is! It s a game changer when it comes to build stuff! I use it all the time! Beeing avle to clamp simething anywhere...priceless!
Ingenious!! Much more sturdy than traditional scaffolding. Well done sir!
Yes, thank you
Brilliant!! We've been using ordinary scaffolding on our farm in a similar way but with a hi-lift skid steer.
Ooooouuuh! That s a nice equipement you ve got!
Congrats on the channel growth Viny B! You Keep us laughing and learning.
Hey thanks man! Appreciated! If only it could grow faster...😅
Ingenuity at its finest !
Thabks buddy!
Hey Viny, nice job, it'll be handy. Like the sand paint solution as well. Cheers 👍💪✌
Hey thanks! Yes it s really grippy!
Thanks Viny, another hugely entertaining episode 😃😃
Glad you liked it!
Well done, top marks. On the sand paint idea, I just painted water proof plywood with acrylic paint then dusted it with "play sand", lovely fine white sand from hardware store. Patted it down. Let it dry, then shook off the excess, Ten plus years later it's still good as the cover to the cellar in front of the laundry doorway.
Brilliant! Love your work.
Many thanks!
I am commenting on your enormous deck. Very impressive!
Behmoth...it s even bigger!😅 Thanks for the comment
RIP Flying machine 2023-2024, You left this world too soon, but at least you didn't take anyone with you...
Those speed holes in the frame remind me of the speed holes that Ford put in their frames in the early 80's and i'm angry all over again
It's funny and sad that would never be allowed on a job site when it's so much sturdier than the sketchy scaffolding that is allowed
Huge props to your son for his drone tracking skills at the end
Yep...the boy looooooved playing with the drone!! If only I could bring me more often with me..🤦♂️
Très belle patente produite par un vrai patenteux.....Bravo.
Merci mon Phil! 👍
Great job !!!😮
Thanks
This is truly OUTSTANDING Sir Cheers 👍😇👌🍻
Thank you kindly, greatly appreciated 🍻
".... here... for the next few years...." - made my day))))
Oh glad you joined and glad it made you day!
Мой дар алгоритмам ютуба.Ваша работа заслуживает достойной оценки.
Thank man!!!👌
Doin' good man!
Lache pas!
Merci mom ami!
I have the same vevor mag drill . I installed a cheap voltage regulator, it fits nicely. So now it has speed adjustment. I played with revers drive, but the motor will just eat the brushes, lots of sparks.
Good to know for the drive!👌
Your camera work and video editing is top notch! Your content is ok too
Glad my content is Ok too! 😅
@@VinyB57 sarcasm. Your content is next level great. Amazing production, ingenuity, and execution.
Wow, tout simplement du génie! Incroyable ce que tu peux faire entre deux repas!!! 😁
Ah non...j ai arrêté de mangé, ca fait de lune!C etait trop de temps perdu 😉
That is a brilliant project. I know that your scaffolding might not be safe for the masses, but I'm confident you can use it safely since you will understand the limitations better than most. I've been accused of doing sketchy things in the past while working on buildings, but if you know what you are getting into, and know the consequences, you can usually be pretty darn safe.
So enjoyable to watch and even more to listen the voice over :😄
Glad you liked it!!! I m using my Barry White voice for the voice over😉
A wood stove. Cool 👍
close.....
@@VinyB57 un smoker, ou un bbq lol 😆 👍😃
My dad always told me that sitting on cold things is bad for hemorrhoids as well lol
Yeesss!!! I m not alone!!!!🎊🎉
I'm already subbed but I gave it a like, and here's my comment. Your builds seem to be getting a lot better at having fewer issues from design to implementation (unless your editing skills are improving). This scaffold system is incredible. Can't believe how stable it is along with its capabilities (height, width, compatibility with tractor)! Well done. I'm looking at my house projects, and travel trailer and am envious of your ingenuity.
Thank you sir!! And yes, this one went pretty well!!
Great content and I absolutely love your fab table. As soon as I have space I will be building one from your plans. Keep up the awesome work.
Hey thanks Jeff! This table is phenomenal! You ll enjoy every seconds you ll work with it!
Excellent work!
Many thanks!
Brilliant work man. Subbed. May your project come coser or better to what you imagine!
Hey thanks mate! Glad you subbed!👍
Great design...I have a plan to secure my scaffold to the bed of 1 of my trucks for a future tree cutting project
Trifecta!
Yes...the all mighty!!!!😅
Great video as always. Keep it up Vinny. You deserve so many more subs.
I appreciate that!
@@VinyB57I keep trying to think of a way to spread the word about your channel. I posted a comment on all of Colin Furzes flying machine videos that you had just made the exact same concept with a lot less to work with. You are definitely one of my favorite channels, not much will stop me from clicking when you upload.
@@tracksoneverything4085 Hey big thanks man! Don't worry about the ''other flying machine'' it's behind me! oh no wait, it's not ibehind me anymore, it's in the dumbster now! 😅
That’s pretty cool
entertaining and educational vid, as usual. nice job!
Glad you enjoyed it!
I appreciate the good videos you put out 👌
Keep up the builds
It is very interesting and informative
Glen from Guam usa
Thanks Glen! 👍
bien pensé!!!! j’adore l'idée!!!
Content qui tu aimes 👌
Salut Vinny, j'ai rien d'intelligent à dire mais si un commentaire peut t'aider, et bien c'est fait.
Super video encore une fois.
J'ai hâte de finir mes rénos pour pouvoir vider mon garage et construire une de tes tables à soudure. 👍👍
Really nice to see you again...Viny B... that were some work to get it there it is now, but you did it... I have a schaffolding now, and Im going to put wheels on the height adjustment part of the legs, and make them hingees to make them foldable then your in place....(Sh.t English language, some times.... some people say I speak flowently , spelling is another matter...)
So are we going to follow your journey to build your own home office...⁉️ Hope so..And Viny dont do anything stupid....🤔🫣🤔🫣🤔🫣🤔🫣🤔🫣🤔....... I mean hurt you self, like falling and soo on... TOP TIP, SAFETY HARNESST AND AT LEAST A WALKIE TALKIE -in firm attached to something and not falling to the ground, AND DO NOT FORGET A PERSON ON THE AUTHOR END OF THE WALKIE TALKIE HOW COULD HELP OR CALL FOR HELP IF SOMETHING BAD HAPPENS....OK!⁉️⁉️⁉️
my brother told me the same thing 😅
My fear of heights is triggering so hard right now :D
🤣🤣🤣Sorry!
Great job buddy.
Thanks Matthew!
First time viewer and I would like to say this is an awesome build you design that perfectly
Hey thanks! Got other cool projects done on this channel...
Honestly, see if you can patent that. It really does seem useful, and there's a small chance you could get a patent for it.
Well here a misconception about patent...You need one if you re planning on making the thing you patented and you don t want anybody else to produce the same thing! Plus patent cost from 50k to 100k CAD...I know cause the company I m working for, has a few patents...Also, you can patent your idea to sell that idea, but Im not planning to fab more platforms or sell the idea! So no patent for this thing, please feel free to build one or more 😉I know it s probably more info that you asked for...
@@VinyB57 Nah, I'm always happy to have extra info! I didn't know that applying for a patent cost money, I thought it was just a matter of sending in the appropriate paperwork.
Greetings from French Harlem, Vermont. You’re a Mad Dog alright.
First time viewer. I didn't realise you were Quebecois until ''voyons Câlisse!''😂😂
C'est parfait😂😂😂
Et oui mon Paul, made in Québec👍
We need a Vinny 57 version of a belt sander/grinder.
Great project ;) As always, plesure to watch ;)
Thank you! Cheers!
This was pretty wild 🙂
It was! 👌
12:04 sa me prenais juste sa pour confirmer mes suspicions.
Madness!!!
I love it!
Thanks!
Nice job
Thank you! Cheers!
Ok, i have no need for one of these but watched it before the buck hoe build anyway.
Loving your content so far, like a cross between Aging Wheels humour and Donn Diy builds.
All hail the youtube algorithm! Wait, wrong channel.
🤣 Good one!!
C'est sketchy en osti ton affaire, belle job!
C est pas si pire...😉😅
Great video but do you mean a caravan when you said traveling trailer?
Well, here (Canada) we (some of us, can speak for all of us😅) say travel trailer... but it could be a caravan!
Nice one
Thanks for watching
fantastic
Thank you! Cheers!
Love your work mate. Comment deployed 😂
Much appreciated 👍
Thanks mate 👌
Nice content
Thank you, and thanks for the comment!
Joli travail comme toujours, content que ta catapulte à homme soit démantelée avant que tu te sois tué :) . Avec toi en ce moment on est dans la période tout tracteur: bientôt le BBQ tracteur, le plongeoir tracteur ....
Et oui...c est la phase tracteur en ce moment...j ai deja hate de revenir a la phase Smart!! Le probleme est que j ai fait un plan de match il y a de cela 2 ans et je ne sais pas comment, mais je le suis a la lettre! Je voulais aggrandir ma maison, mais j avais besoin d un tracteur pour ce faire. Ce dernier devait avoir bcp d accessoires pour m aider dans les renos...fourches..bachkoe etc...Maintenant, il ne me reste qu un projet a faire avant les rénos et dés que je termine cette réponse, je devrais mi attaquer! 😉
next project: a smoker, heated outside bath, hot parts washer.
good guesses...it s pretty close to the heated bath...😉
french windows xp: thats hot
Viny are you building me a hot tub
why an hot tub!? 🤔
WHEELS = ROLLERCOASTER
sort of...🤔
#rookiepilot his line at 7:00 is freaking awesome!
Glad ypu liked it!! I almost deleted that part from theis video
16:24 ahahahahahaaahah!!!🤣🤣🤣🤣🤣
ouin...c était pas ma meilleure idée...😅
👍🏻
👌
Comment!
Good enough! 😅👍
Bueno
Gracias!
Here's your comment Viny! I hope you know what you can do with it.
Thanks
Constructive comment
Stick with core/basic engineering
Avoid swinging flying Batman center of gravity tipping over, slipping on icy
Post every eeek
I cannot post every week....still working full time job...this build took me a month to fabricate + about 60hr of editing...My days start at 6h30 and finish at 21h00..7 days a week 😳🤦♂️ Please help! 😅
Google pump jacks and aluminum plank
Yep these are great! But I think you have to attach the top posts to the building, right?
Je sais pas si les sacres font rires tout le monde mais moi çà marche sur un moyen temps :)
Alors je vais continuée a en mettre...😉
Oh ai entendu un (F) c'est chaud t'est surement québecois 🙂 Et aussi un Co.....
Yep made in Québec...j ai pas com pris le co.... 🤔
For the algorithm
Thanks mate!
Hello, this is a comment. Thank for reading said comment. Goodbye
I am commenting on this comment. It is a comment and this is my comment
Thanks for the comment
Can I be so bold as to comment on the previous comment?
No
Yes! And i like to comment on that
Yet another channel that RUclips removed from my subscriptions! Fixed.
Is it stupidly brilliant or brilliantly stupid! Mmm.
#1 😅