When I searched for support settings I found a bunch of click bait garbage. Then I found your video which actually shows examples and settings. Fantastic. The internet is filled with so much rubbish these days :(
For anyone coming here who cannot find some settings. At the top left click the downwards arrow to bring the list down. Click on Preferences, then enable Developer Mode.
@@ShaywayNo problem, I was having some trouble finding it myself and had to do a little research. Figured I'd help out someone else who may have been like me.
@@kevincandiloro9524You're either trolling or are completely blind. You don't even need any extra setting options turned on to see wall loops it is a basic setting. Literally the first setting under the strength tab.
Just printed my first self supported model on my A1, and the supports worked and came off perfectly. Huge thanks to the person who made the profile and you for making this video to get the word out.
I've been sending everyone on the Bambu Lab Facebook page here for model and figure supports because DANG do these settings make for clean models! Thank you!
Thanks for this video. I am new (a few days) to 3d printing and I have been looking at a bunch of video's trying to find better ways to use support. A lot of the videos are quite long. For me, they go way to deep into the history of the world and why stuff works the way it does and where the idea came from and which came first, etc. My point is, all I wanted was the settings and you did that. So thank you! I don't mean to dog on the other folks that go in way deep on the stuff, but THIS is all I wanted. Now I will try these settings and make my own opinion.
Thank you for sharing, i've been pulling my hair out trying to get nice clean break-away tree supports. Do you happen to have updated settings for Orca Slicer 2.1.1 ? Thanks!
@@Rexlernah it’s not there in advanced settings either. Tbf to the above commentor, none of the settings would be visible if they hadn’t checked advanced settings. 😂😂 🤦🏻♂️
Just wanted to stop by, printed an inspired by Halo M6G Mag last night and used your tree settings. Everything was perfect and snapped off without effort. Didn't even cut myself once, lol! Breaks were clean off of the model as well. Thank you!
Thanks for this. I appreciate any help. Unfortunately, my supports went from hard to remove to impossible with these settings. Back to the drawing board.
just found this page about support and, although some of the parameter names have changed, I have set what I can in the latest Bambu studio and the results are amazing. using a 0.2 nozzle with basic filament I am not getting near perfect mini figures with little to no scaring at all
Bro, these settings work very good on my P1S with PLA and also PETG, which I didn't expect at all. I also used the normal Support, because it sometimes was necessary...great recommendation, thank you!
I would love some help dialing in settings for 3d printing small minis. It seems to either be incredibly difficult to remove ripping off or scaring small parts. or so weak it cannot hold things like hands that start mid-air
I’ve had some issues with tree support coming unstuck when the tree gets tall. The nozzle sometimes catches the top of the tree when tall and rips it off the plate. Is there a way to make the brim around the base of it bigger? Thanks, I’m new and still learning.
@@He_Fly I made these changes which seemed to help. Under “others” increased Brim width to surround tower brim. Under “support” set threshold angle to “15”. Tree support brim width to “20”. Support wall loops to “2”. Tree support branch distance “5mm”. Tree support diameter “2mm”. Tree support branch angle “60”. With these settings, I have not experienced them coming loose.
Por mais que esteja super certo nisso, seria interessante falar mais sobre alguns dos parâmetros usados, o porque usar , mostrar o objeto em questão com o suporte sendo removido.... qual a a relação do Top z Distance e o porque do valor usado, largura de camada do suporte , etc...explanar mais sobre o o assunto .
@@ShaywayIt hasn't been removed. You need to enable developer mode to view it. At the top left click the downwards arrow to bring the list down. Click on Preferences, then enable Developer Mode.
These are fantastic settings, can you do an update for the latest version of Orca? it seems many available settings have been removed or renamed. Thanks in advance!
Is it just me or does default settings for bambu x1c suck? I've had one print where it was successful and a small handful that were unsuccessful. I feel like it's the large areas where it struggles.
![Lil Uzi Vert - We Good [Official Audio]](http://i.ytimg.com/vi/DrSfBULAsek/mqdefault.jpg)
If you have any questions or would like to see me cover something, please leave a comment! Thanks for watching (and subscribing)! 🔥🔥
Subscribed. Newer Bambu Studio seems to have removed Bottom Interface Spacing. I assume it's 0 now, or is there a different place for this?
@@davetriesthis i have the same question.
so many questions below that you didnt answer yet you claim you would..
Me too
Hi, what its xy distance object? thanks¡
When I searched for support settings I found a bunch of click bait garbage. Then I found your video which actually shows examples and settings. Fantastic. The internet is filled with so much rubbish these days :(
Same
Just another 3d printing nerd who can confirm that this video is it. Thank you for posting this Shayway!
For anyone coming here who cannot find some settings. At the top left click the downwards arrow to bring the list down. Click on Preferences, then enable Developer Mode.
Thanks for sharing! I'll pin this comment!
@@ShaywayNo problem, I was having some trouble finding it myself and had to do a little research. Figured I'd help out someone else who may have been like me.
I still don't have the wall loop setting. Orcaslicer 1.9.1
@@kevincandiloro9524You're either trolling or are completely blind. You don't even need any extra setting options turned on to see wall loops it is a basic setting. Literally the first setting under the strength tab.
good boy!!!
Just printed my first self supported model on my A1, and the supports worked and came off perfectly. Huge thanks to the person who made the profile and you for making this video to get the word out.
I've been sending everyone on the Bambu Lab Facebook page here for model and figure supports because DANG do these settings make for clean models! Thank you!
Thank you!
Should I use them for every model pretty much? I’ve just been using the default settings (I’m new)
Thank you for making this short! Appreciate it!
Dude, show a print made with these settings =)) At this moment the video is like: use these settings because I saw them somewhere on reddit.
Thanks for this video. I am new (a few days) to 3d printing and I have been looking at a bunch of video's trying to find better ways to use support. A lot of the videos are quite long. For me, they go way to deep into the history of the world and why stuff works the way it does and where the idea came from and which came first, etc. My point is, all I wanted was the settings and you did that. So thank you! I don't mean to dog on the other folks that go in way deep on the stuff, but THIS is all I wanted. Now I will try these settings and make my own opinion.
Glad to hear I could help! Thanks for watching
Thank you for sharing, i've been pulling my hair out trying to get nice clean break-away tree supports.
Do you happen to have updated settings for Orca Slicer 2.1.1 ? Thanks!
I don’t see “ bottom interface spacing “ on my bambu slicer could it be removed after the update?
same
Did you ever get an answer on that I dont have it either
Same as well any help? Thank you so much btw just got my P1P and supports been an issue. keep up the good work!
You need to turn on advanced settings 🤦
@@Rexlernah it’s not there in advanced settings either. Tbf to the above commentor, none of the settings would be visible if they hadn’t checked advanced settings. 😂😂 🤦🏻♂️
This maybe needs an update video, the support menu had changed quite a bit since you made this
Just wanted to stop by, printed an inspired by Halo M6G Mag last night and used your tree settings. Everything was perfect and snapped off without effort. Didn't even cut myself once, lol! Breaks were clean off of the model as well. Thank you!
Awesome! Thank you for the follow up! I'm glad they worked for you too :)
This is such a great video to come back too.. i keep forgetting to save my settings lmao
"Tree support wall loops" isn't visible in the current version of Orca, or could it be hidden by another setting?
apparently he doesnt answer questions
hybrid tree supports are the ones that allow you put wall loops
Do you recommend these same settings if you're printing at .20mm?
Thanks for this. I appreciate any help. Unfortunately, my supports went from hard to remove to impossible with these settings. Back to the drawing board.
change Top Z distance to 0.3mm
I think it'd be helpful to delve into WHAT exactly each of these options are that you are changing. Otherwise, thanks for the great vid!
I followed your numbers in your slicer for supports identically and my tree supports are adhered to my object. I can not get them off!!! Please help!
Same problem wasted a half of s roll of filament and they're welded to my print
Would these settings be the same if you were using a 0.6 nozzle?
Amazing!!!! thanks for share your knowledge!!!!
About to test your settings after cutting my hand on a massive area of tiny tress HA!
Ouch! I hope they help. Best of luck!
These setting are on point!
just found this page about support and, although some of the parameter names have changed, I have set what I can in the latest Bambu studio and the results are amazing. using a 0.2 nozzle with basic filament I am not getting near perfect mini figures with little to no scaring at all
would of been nice to see the model with the supports breaking away
and the settings in a printables cube maybe with settings in that file
This is really good feedback. I don’t know why I didn’t think to actually shoot that. I will definitely upload the settings to printables though!
@@Shaywaydid the files get on printables ?
A comparison
Bro, these settings work very good on my P1S with PLA and also PETG, which I didn't expect at all. I also used the normal Support, because it sometimes was necessary...great recommendation, thank you!
Glad to hear it!
I just bought this printer! I will defanatly use these settings.
worked the first time but then the second time didnt work. i noticed the trees had some gaps in them, any idea how to change that?
I would love some help dialing in settings for 3d printing small minis. It seems to either be incredibly difficult to remove ripping off or scaring small parts. or so weak it cannot hold things like hands that start mid-air
Would these settings be mostly universal? As in for the most part can I use them on any print for more effective supports and easier removal?
I’ve had some issues with tree support coming unstuck when the tree gets tall. The nozzle sometimes catches the top of the tree when tall and rips it off the plate. Is there a way to make the brim around the base of it bigger? Thanks, I’m new and still learning.
yo that happens to me too, and it happened again just now. did you find an answer to it? it's so frustrating
@@He_Fly I made these changes which seemed to help. Under “others” increased Brim width to surround tower brim. Under “support” set threshold angle to “15”. Tree support brim width to “20”. Support wall loops to “2”. Tree support branch distance “5mm”. Tree support diameter “2mm”. Tree support branch angle “60”. With these settings, I have not experienced them coming loose.
Implemented this in my print. Now it is impossible to remove the supports. Could be a me problem but this didn’t help at all
I tried this. Supports are COMPLETELY fused to the part and cannot be removed.... there goes a 26 hour print.
These settings worked great for months. But now the supports are welded to the print. What do you think happened?
Odd, maybe new filament or the slicer updated?
Top Z distance you have as 0.16 but is this relative to the layer height?
Yes it would be!
Por mais que esteja super certo nisso, seria interessante falar mais sobre alguns dos parâmetros usados, o porque usar , mostrar o objeto em questão com o suporte sendo removido.... qual a a relação do Top z Distance e o porque do valor usado, largura de camada do suporte , etc...explanar mais sobre o o assunto .
Can you please show us youre hole settings? I always fale printing😢
Does bambu studio have a "bottom interface spacing" ? I only see a Top interface option.
From what I can tell, I believe it’s been removed.
At the top left click the downwards arrow to bring the list down. Click on Preferences, then enable Developer Mode.
Appreciate the settings. Do you use same filament as print or support filament? thanks
I do! I haven’t tried multi material prints yet.
I don't see bottom interface spacing on Bambu slicer can you help
I believe it’s actually been removed. I don’t see it in Bambu studio now either
@@ShaywayIt hasn't been removed. You need to enable developer mode to view it. At the top left click the downwards arrow to bring the list down. Click on Preferences, then enable Developer Mode.
Do these setting still work well with ABS, or at least better than defaults?
I've used them for PLA and PETG with no problems but I haven't tried anything else yet :(
Do you have the settings for the AnkerMake m5 with AnkerMake slicer?
I do not unfortunately. I haven’t used the AnkerMake Sliced much
These are fantastic settings, can you do an update for the latest version of Orca? it seems many available settings have been removed or renamed. Thanks in advance!
maybe you'll need to activate developer mode?!
I used these settings and the tree supports stick and dont break off easily as my prints break from trying to take them off
Your Orca advanced settings have things my Orca advanced settings doesn't have. SMH
I'm running a Comgrow T500
I filmed this a while back, things may have changed since then 😔
Would this make the tree support easier to remove? Because I'm having a hard ass time removing it 😂
yep!
How come some of my options in advanced are not showing the things you have listed
it looks like some things were removed in later updates after I filmed this
At the top left click the downwards arrow to bring the list down. Click on Preferences, then enable Developer Mode.
@@Shayway They were moved into "Hybrid Tree" settings. So default no longer has them, but the hybrid tree does and it works the same as before for me!
Existe uma relação na altura de camada e o valor do Top Z distance...
Thanks 💪🤙
Is it just me or does default settings for bambu x1c suck? I've had one print where it was successful and a small handful that were unsuccessful. I feel like it's the large areas where it struggles.
Thanks!
Thank you!
I used these setting and still had to cut the supports off snips and had scarring all over
He’s as bad as can, and he knows he’s the best!
LMAOOOO no one gonna mention what youre printing xD
😂😂😂
@@Shayway Bro i fu**in love beet.. Hes a legend. been on video games and everything
Enable Developer Mode to regain access the required settings.
It might help to actually show what the generated supports look like and how well they peel off. 😕
Bambu Studio has been updated...no more Bottom Interface Spacing
didnt work for me