Changing Hydraulic Filters On An Excavator - STEP BY STEP

[@TekamoHD]

DO OUR VIDEOS HELP? SUPPORT THE CHANNEL and help us make more content! Buy rubber tracks, heavy duty tooling, and undercarriage parts at tinyurl.com/Support-TekamoHD

[@nrxhavoc]

chromes on an impact this guy is a savage

[@jesegarcia8902]

Don't let snap one see it lol

[@leobhangu]

Instead of taking the snap ring off , he should've rotate the filter 180° and remove the whole canister out. That way you are not releasing any dirt out. That's the right way.

[@ADITYASHARMAACADEMY]

ruclips.net/video/A6notw5fxGg/видео.html

[@jondoherty3678]

You have to take the snap ring off then turn 180 degrees

[@Resleeved]

Need to rotate the whole cannister 180 degrees, then remove the entire cannister and THEN change the filter and drain the dirty oil. Doing it this way keeps all the dirty oil in the tank.

[@heavymachinery2843]

I like to put bolts in plastic boxes or magnetic trays when i work on heavy equipment good work 👍

[@TekamoHD]

Thanks for watching! Let us know if there's any video you'd like us to make.

[@emichaelschmidt]

@@TekamoHD EGR/SCR delete!

[@DB-oz2ki]

I like your videos, however on this one, one thing got me. Remove the cap to the tank to remove any pressure, then put it back on. You left it off moving bolts over it, dropping a bolt into the tank could happen.

[@ramosel]

That's not the correct way to change the Hydraulic filter. You just dumped dirty oil into the tank line. There are directions on that handle on how to do it right.

[@jaichandkamboj3463]

Your work is good

[@amathonn]

Am I the only guy that sees a klutz like me dropping one of those bolts and watching it bounce into the hydraulic tank?

[@ADITYASHARMAACADEMY]

ruclips.net/video/A6notw5fxGg/видео.html

[@omerkhalil7065]

Very informativ vedios thanks for sharing this type of knowledg

[@nelsonsantos770]

oil from the filter still looks so clean though!

[@maxpower9631]

thanks Keith, have old Deere excavator....this will help !

[@TekamoHD]

you're welcome, glad it helped

[@SunilSingh-xw2hg]

Good video im glad i found this❤❤

[@HarleyMothersole]

What snap on drill is he using?

[@martinkoche4375]

Thank you

[@yunianisa8134]

Trimakasih mister. Salam dari indonesia

[@leobardosantos259]

How to replace hydraulic filter on 2007 304E CR ?

[@bernhordredecop2319]

Does it help to change the return filter for the hydraulic oil getting hot?

[@reelMn]

H thanks for the video. My Hitachi UH061 has a strange round smaller cap on the top of the suction filter - feels like rubber - it’s under the fluid level. I haven’t figured out how to remove it. Any ideas?

[@martinbernal5693]

Loosen the cap, don’t remove it. Don’t want to accidentally drop a bolt down there. Ask me how I know about that.

[@behelpful1435]

At 2:54, what do you mean be seal pieces?

[@makimohamed1307]

شكرا شكرا

[@gokulratheesh7399]

Which country you are working

[@jaichandkamboj3463]

You're work like it

[@jagannathmahapatra8057]

After how much hours we change hydraulic filters?

[@Senkino5o]

Work it out bud.

[@ADITYASHARMAACADEMY]

ruclips.net/video/A6notw5fxGg/видео.html

[@ADITYASHARMAACADEMY]

ruclips.net/video/A6notw5fxGg/видео.html

[@operatormudascebeh4071]

Perfect

[@TekamoHD]

Glad you think so. Let us know if there's any other video we can create to help.

[@mdrajan1019]

Hi sir. 1st thnx. Ur video is very useful. But 1 time u did mistake. U r open hydrolic tank cover. Remove gas but u not fix cover and remove bolt. Any bolt slip ur hand and drop in tank after to much prblm.

[@ADITYASHARMAACADEMY]

ruclips.net/video/A6notw5fxGg/видео.html

[@neilgordo4654]

What is the make of the Impact wrench

[@esteban_alonso]

Snap-on

[@cocomaster3755]

Yeah I paused the video about 10 seconds too soon... Heads up everyone push the button on the Volvo push the button on the volvo!

[@tomasgilboy5362]

Dose it mater the level of the hydraulic oil tank wants it above the Minimum mark or can you put to puck oil in

[@RAVINDRAKUL]

Hi wants to join your team.

[@kristiheitz3022]

Do you know how to drain the hydraulic oil on a 938M wheel loader?

[@erwinvandenhoven1198]

Machine manual

[@westernstar4964]

Open one of the side access doors. A tube will be routed there from the tank

[@SteveXNYC]

A filter with no sump is a waste.

[@ЕрмаханКутлимурадов]

Фильтр гидрораспр

[@jaybell9145]

U shud have changed new gloves when u held the new filters.dirt already clinged to ur gloves and will stick into new filter.

[@ADITYASHARMAACADEMY]

ruclips.net/video/A6notw5fxGg/видео.html

[@mdrajan1019]

Sorry if you felt hurt

[@ADITYASHARMAACADEMY]

ruclips.net/video/A6notw5fxGg/видео.html

[@DontFuckWithMexicans]

Great video! its helping get me through my foundations!

[@TekamoHD]

Glad we could help you get through your foundations! Let us know if there are certain topics you would like us to cover.