Peugeot 308 1.6 HDI DV6C EGR Valve replacement P0409 P12B4 P0490
HTML-код
- Опубликовано: 29 ноя 2023
- Step by step guide on how to Replace the EGR Valve on a Peugeot 308 2015 model 1.6 diesel HDI. Engine code DV6C / DV6
Engine light was on and fault codes P0409, P12B4 & P0490 EGR fault codes stored in Engine ECU. Also C1391 & U1208 stores in ABS ECU.
Same procedure applies for the same engine in all the Citroen, Peugeot, Volvo, Fords & Mazda's etc.
Any Donations to help Support my Channel are much appreciated.
Donate via Paypal - paypal.me/diydaly
Check Euro car parts - tidd.ly/3lIO7xA (use discount codes on site)
Diagnostic machine I use - diydaly.co.uk/products/phoeni...
New Pierburg EGR Valve Ebay - ebay.us/hdEs2f
New Pierburg EGR Valve Amazon - amzn.to/47yJpK5
Tools used :
1/2” Milwaukee impact driver - ebay.us/4SOewF
Milwaukee 3/8 Drive Mini Impact driver - ebay.us/Pg8ilg
Milwaukee Battery ratchet - ebay.us/BZZqQG
Slide hammer - ebay.us/DoLoAL
Socket set - amzn.to/3eGx2Ak
Bonnet lamp - ebay.us/LdCubq
Ring Inspection Lamp - amzn.to/3gGWHcG
Torx screwdriver set - ebay.us/oSEnTd
Torx Socket set - amzn.to/39UTWCw
1/2" Air impact driver - ebay.us/3LRqLL
WD40 - ebay.us/Z6fXmA
Pry bar set - ebay.us/3oVXD4
Trolley jack - ebay.us/8kFklk
Brake cleaner sprayer - amzn.to/2BLF1gX
Check out my other timing belt replacement videos:
• Timing Belts & water p...
Check out all my PSA group Videos: • Timing Belts & water p...
If you found this video useful, please Like Share and Subscribe to help grow the channel, and never miss any future content. ruclips.net/user/gavdaly?...
Please also check out my website - www.diydaly.co.uk where you'll find top quality goods, tried, tested and recommended by actual mechanics.
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. This doesn't effect the price you pay! 
Авто/Мото
Beautiful showed and explained ❤
Thank you so much 😊
Great video. Thank you very much. It is really helpful.
You are welcome!
Today I tried to pull the egr on a Volvo v60 with absolutely no chance... Blows, jerks, and the valve didn't budge an inch! Anyone have any advice on how to enable this? 🤯🤯🤯
Hi thanks for the video I’ve just replace mine and still got a error code after calibration of the new egr valve which is p14a3 would you have any ideas thanks
What brand egr valve did you fit?
Great video. Very cleanly explained and filmed. I have a question. Is it possible to clean the valve instead od substitute it ? How difficoult is to unmount the electronic part of the valve for cleaning the metallic part in a cleaning liquid ? or it is sufficient to put the metallic part under cleaning liquid without dismounting the electronic part ?
Thanks in advance for you reply
It is possible to clean the valve but you will need to remove it completely
Excellent Tutorial! Besides the fault codes, were there any symptoms that led you to perform a diagnostic? For example did the car go into limp mode?
Just engine warning light came on , I can some times cause it to go into limp mode too
On the Focus MK3 with this engine is there direct access to the EGR as the airbox isnt in the way and dont think you have to remove the scuttle panel
Not too sure on the focus tbh
A te ha ripreso il motore? Io devo pulirla perche il motore non ne puo piu è un problema di egr
I had a bad egr valve code for months and today my car only cranks but doesn’t start. Could it be because of the egr valve?
Possibly but hard to say with out looking tbh mate
What lights on dash did the faulty egr bring up.
engine warning & ESP
Do you have any tips for a severely stuck one? I tried from above levering, and also underneath, hitting the exposed tabs with a long bar and hammer, but they just broke off. It's not moving even a thou, and I'm having to put so much force on the left hand end it feels like the whole plastic piece will break. It's on a Volvo V50, so initial access is easier, but there is a metal plate forward of the scuttle that hinders access the the rear too get a pry bar in, and as it carries the VIN it's welded to the towers. Also one of the bolts sheared clean off halfway even with the gentlest application of force and loads of lubrication. The whole thing is a total POS 😞
😬 they can be abit tricky sometimes! Not the best for decent access on the Volvo , can u get a decent long prybar on it from underneath to give it a good whack?
@@diydaly I got underneath the car with a long socket extension and hit out, but bits of alloy just broke off. I think I might need to remove all of the rear pipework, cooler etc and remove it when it's off the engine. Also then I can drill out the sheared bolt.
😬 doesn't sound fun! ive never had one that ad on this engine! @@chrisburn7178
Today I tried to pull the egr on a Volvo v60 with absolutely no chance... Blows, jerks, and the valve didn't budge an inch! Anyone have any advice on how to enable this? 🤯🤯🤯
Thanks for the vid. Just replaced mine, but now getting P0489 instead of P0490 and goes into limp mode with a parking brake fault message that i didn't have before;( Could it just be a matter of recalibrating the new EGR valve?
Sounds like wiring issue or faulty egr tbh mate
@@diydaly the new egr has been recalibrated and actuates ok apparently. new code has appeared- P0405 - control circuit low, suggesting maybe the DPF sensor is reading/stuck low? can't back probe it tho..
@@diydaly think i found the issue- a dodgy connector to the EGR (erratic EGR position sensor was a clue). and measuring voltage whilest the wiggling the wire at connector. any idea what the connector type is? (5 pin)
wonder how many egr replacements could have been avoided...;)
@@maljo4601 arr bonus! Nice find mate! Usually spares are available on eBay
I got a 1.5 same engine in a viavro I got a P2413 changed the egr valve, its the same type that you have fitted. Relearn the egr to ecu. 5 mins later engine warning light came back on.. any ideas ??
The vivaro has the main egr at the front and the cooler at the back.. both are common issues
@diydaly after spending an hour found the route cause of the problem hair line split in the vacuum pipe that goes to the actuator on the egr cooler...
Took me a while to find this fault but manage to replace the small pipe and no more DTC!
what manufacturer do you recommend for egr
pierburg
Peugeot OEM is Valeo in my 308 sw 2015
Друг, решил проблему?
👍 yeah
I must replace DV6FC egr in a 308 but there is no video. EGR is a bit different modelo but I think i can get It :-)