Это видео недоступно.
Сожалеем об этом.
2011 Honda Accord Headlight Bulb Replacement In 60 Seconds
HTML-код
- Опубликовано: 19 авг 2024
- Replacing the passenger side low beam headlight on my 2011 Honda Accord without ever opening the hood. So easy anyone could do it!
I ANSWER ALL RELEVANT COMMENTS!
NEW VIDEOS UPLOADS EVERY DAY!!
WATCH THE FULL VERSION IN 4K WIDESCREEN HERE: • 2011 Honda Accord Low ...
Please LIKE, COMMENT, & SUBSCRIBE!!!
/ mrfixittv
Email: mrfixitracing@gmail.com
Instagram: @mrfixitracing
Visit Us On Etsy: www.etsy.com/s...
Dude Hondas video wanted you to take off the bumper and remove the whole light fixture. You're a savior!
Thank you for this, man. It was tight for my hands but it worked. I saw a clip that instructed people to take off the whole bumper and jack the car up just to replace the bulb.
You saved me time and money. There was no way I was going to overexert myself or pay someone $100 or more to disassemble the front of my 2010 Accord just to change a light bulb. Thanks a bunch!
You are the man! Honda wanted to charge me almost $200 to change light bulbs. Thanks to you, I can do it for free! Lol
Best video I’ve seen on how to change a low beam headlight bulb on a 2011 Honda Accord!
Thank You!
Is the 08 the same way
Facts!
I got turned down for this change at the shop for my 2012 accord because it was too difficult and they were about to close. I'm a five foot nothing lady who has never touched a car and this video made me able to change it. Thank you so much, I feel like I can do anything now ❤
Thanks bro. Look short and straight to the point.
Thanks
Best easiest video! Thank you so much! AWESOME!!!
dude amazing work thank u so much for the video
Works with 2012 as well I’m guessing right??
I was about to remove my whole bumper and headlights thank you im going to try this instead
My fender has bolts on mine same year same color, so are you popping the bolts put cause mine don't have clips
i don’t even got screws on mines it’s pins or something so i definitely can’t do it
Yes you can. Basically the same thing. Use a flat has screw driver or specialty door panel tool
Which way does it turn counterclockwise or clockwise?
What happens if you touch the end of the bulb?
nothing you'll be fine but the oils on ur hand will get on the bulb and it can potentially burn out faster than anticipated but its not like it will explode or anything like that.
Thanks!
Ur awesome dude thanks!!!!
My bulb wont come out, it will turn counter clock wise but wont come out? Any tips
It's probably just stuck from many heat cycles. Once you have turned it all the way until it stops (about a 1/4 turn) then pull. You may have to use something like a wrench or needle nose for some extra leverage but it should pop out with enough pull. Look and see if the tabs are lined up to come out before you start to pull. Good Luck!!
Also silicone spray applied and sitting for 15 minutes can help as well but makes getting a good grip much harder...
Your wild you did that shit in the night lolll
i have a 2011 accord do i do the same to switch the bulb or is it different?
You can use this method. If you have large arms you may want to have someone with smaller arms help but you can fold the fender liner back pretty far. No need to remove anything else. Just make sure and cut the wheel all the way first so you have plenty of room. Good Luck!
@@MrFixitTV Ok thanks
Is the driver side the same
Yes same on both sides.
2009 accord?
Now lets see the other side.
Is it 9005 or 9006
Was it 9005? I bought some 9006 because someone convinced me that was correct but the plugs don’t match
You’re a bad mf. Thank you brother.
My shit stuck because my panels are not on so im thinking water got up there and now its stuck
Maybe cause it’s dark but BRUH That is NOT A 2011
tried this way and my hand/arm is too big to get the proper grip to give the bulb a twist. oh well, the Honda way still only takes like 10 min