What type of content would you like for the next public class? Let us know right away. For more course information, please check: bit.ly/3eFyNNE Q&A with REWA Team, please like and stay tuned to our FaceBook page: REWA Technology ( bit.ly/2zGj3vn )
I have XR and am having trouble with the First issue, Lower / higher your camera and then face ID not available. Actually I have replaced the screen and later I found my battery starts draining fast but everything else was working well such as face is and everything. I diagnosed it and came to know the proximity sensor has the issue so I disconnected the earpiece and the battery stopped draining. I tried to reheat the sensor, it fixed the draining issue but now having problem of adjust lower/ higher camera. I wanna know If I replace the earpiece sensor will I lose the face ID?? I tried another earpiece flex also but face id doesnt recognize on that. Please advice @Rewa Technologies
The flood illuminator on the earpiece speaker flex cable is part of the Face ID security feature and therefore should be the original one. If the Face ID failure is caused by the earpiece speaker flex cable, you can replace the earpiece speaker flex cable and transplant the original flood illuminator module to the new flex cable. The battery draining problem maybe was related to earpiece speaker flex too. This just for a reference. Please noted that the operation of transplant earpiece speaker flex needs sufficient handwork skill and we do not propose to easily try. Thanks :)
It's ironic that I found my problem here, from this video, rather than from Apple Care contacted service operator. I did all procedures to fix the Face ID, up to factory reset my iPhone X.
Hi! Please solve the iPhone 11 screen swap issue, where the phone warns the consumer with pop up message, saying that the screen might not be genuine. I know the issue is being worked on, but it would be impressive from you to witness on youtube.
I think there is a video they used a certain programming tool to program the new screen from older one. Just check on restoring something. at the end you will see that programming tool.
@@tastytechaddictsmtb is right the thing is to transfer the ic to the new screen at least for now, but there is a real programmer tool coming other than the true tone and vibrating... replacing the ic is not a big deal if you know how and have the stencil for reballing the ic but the tools would be faster !!
If there is no image when using Face ID or while using the front camera: 1.) It maybe the camera module itself. 2.) It may be a power rail, control signal or reset signal. 3.) It maybe components on or near the connector. 4.) There may be damage to the front camera flex 5.) May be an issue main or camera PMU Your description is too vague to narrow the problem down.
Pls upload .video in Beginners.Perfect method Bga reballing ic.use level Hot&Air Levels&Temperaser.Easy way in ic Reballing.Timeing limit."video" in English sub Titiles.Thank u.
Hi Mohammad, thanks for your feedback. We will keep improving and check more carefully for the detailed description. And welcome to discuss the different ideas.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
What type of content would you like for the next public class? Let us know right away.
For more course information, please check: bit.ly/3eFyNNE
Q&A with REWA Team, please like and stay tuned to our FaceBook page: REWA Technology ( bit.ly/2zGj3vn )
Sorteia um inponi x 11 deste pra gente do canali ?
There is error for flood illuminator description , it points to front camera connector (not earpiece flex connector on motherboard )
@@GERynew Thanks for your comment :)
The direction of connector draw should be more accurate and we will have more attention to it.
Great videos , thanks for your work !
iPhone 11 video please
amazing video !!! thank REWA
Thanks for watching :)
I have XR and am having trouble with the First issue, Lower / higher your camera and then face ID not available. Actually I have replaced the screen and later I found my battery starts draining fast but everything else was working well such as face is and everything. I diagnosed it and came to know the proximity sensor has the issue so I disconnected the earpiece and the battery stopped draining. I tried to reheat the sensor, it fixed the draining issue but now having problem of adjust lower/ higher camera. I wanna know If I replace the earpiece sensor will I lose the face ID?? I tried another earpiece flex also but face id doesnt recognize on that. Please advice @Rewa Technologies
The flood illuminator on the earpiece speaker flex cable is part of the Face ID security feature and therefore should be the original one.
If the Face ID failure is caused by the earpiece speaker flex cable, you can replace the earpiece speaker flex cable and transplant the original flood illuminator module to the new flex cable. The battery draining problem maybe was related to earpiece speaker flex too.
This just for a reference. Please noted that the operation of transplant earpiece speaker flex needs sufficient handwork skill and we do not propose to easily try. Thanks :)
REWA Technology 🔥
It's ironic that I found my problem here, from this video, rather than from Apple Care contacted service operator. I did all procedures to fix the Face ID, up to factory reset my iPhone X.
iPhone 6s cannot charge already replace usb ic and diode
If your iPhone 6s not show charging sign then you try 1+ 5watt 4.4 am charger Hope your problem solve
wil try and see....
why am I here. I don't even have an iphone lol.
knowing something is important either u have an iphone or not..... not all iphone technicians have to have an iphone .👍🏼
Me too LOL
Best guideline
Hope it could be some reference for you :)
Good video..... Please make vdd vcc vbat short finding video?
Thanks for your support :)
We will keep work for more video content. Please stay tuned to us!
Thanks for your attention
What map did you use for the circuit board?
The bitmap software is REFOX, and you can check this link for free download:
www.refoxteam.com
Hi! Please solve the iPhone 11 screen swap issue, where the phone warns the consumer with pop up message, saying that the screen might not be genuine. I know the issue is being worked on, but it would be impressive from you to witness on youtube.
I think there is a video they used a certain programming tool to program the new screen from older one. Just check on restoring something. at the end you will see that programming tool.
@@kevinmugambi465 yes, thats data transfer for true tone. It won't fix the genuine screen warning problem though.
Theres already a solution for that, transfer the ic to the new screen flex, works fine then.
@@tastytechaddictsmtb is right the thing is to transfer the ic to the new screen at least for now, but there is a real programmer tool coming other than the true tone and vibrating... replacing the ic is not a big deal if you know how and have the stencil for reballing the ic but the tools would be faster !!
My phone’s Face ID is not working and iPhone portrait mode in selfie cam is also not working what to do
If there is no image when using Face ID or while using the front camera:
1.) It maybe the camera module itself.
2.) It may be a power rail, control signal or reset signal.
3.) It maybe components on or near the connector.
4.) There may be damage to the front camera flex
5.) May be an issue main or camera PMU
Your description is too vague to narrow the problem down.
amazing video
Please make a video for beginners for Bga Reballing
Thanks for your useful feedback :)
شكرا لكم على وضع اللغه العربية في الترجمه 😍😘 اتمنى ان اتعلم لديكم في الأكاديمية ❤
Welcome to visit REWA Academy for experiencing free case course :)
Rewa 👍🏻👍🏻👌🏻👌🏻
NICE
online course how get
Hi Moham, pls check academy.rewa.tech for more details of our online courses.
Pls upload .video in Beginners.Perfect method Bga reballing ic.use level Hot&Air Levels&Temperaser.Easy way in ic Reballing.Timeing limit."video" in English sub Titiles.Thank u.
Thanks for your feedback.
Welcome to visit academy.rewa.tech for experiencing free case course.
Hope it could help you something :)
We need a tools to disamballe all IPhone's mother motherboard
Would like Thai subtitles too
J4600 flood illuminator connector correctly
show completely different on the board J4200 is a front camera
The direction of connector draw should be more accurate and we will have more attention to it.
Thank you for taking the time to comment :)
@@rewatechnology2008 Thank you for shooting such videos, continue good luck to you.
😂
I have placed an order and made payment then also it is showing invalid date
Could you contact us at academy@rewatechnology.com for the problem order?
We will reply to you ASAP. Thank you :)
you should mute the music cause the instructor voice is verry slow and can’t be hear properly cause of the music merging.
I know how this system works, I worked many days and nights to find the problem, 98% face ID has the same symptom, problem, damage.
Write it here if your observation includes something new. =)
There is a little misinformation in this video :-) Yogi is NOT CAMPMU . thanks by the way .
Hi Mohammad, thanks for your feedback.
We will keep improving and check more carefully for the detailed description.
And welcome to discuss the different ideas.
the problem is somewhere else. three years ago I diagnosed the problem and I know how it works. Good lock ;-)
I wish good luck in the repair but I think you will not find a problem ;-)
Text-to-speech is better than this narrator's accent
Thanks for your feedback on our video, which helps us for improving video experience :)
Should have subtitles. Or hire someone with a lighter accent. Having a hard time following. 😅
We have added 11 language subtitles in English, Spanish, etc. You can check it from the setting of the video bottom right.
Thank you :)